• Title/Summary/Keyword: 정우성

Search Result 471, Processing Time 0.025 seconds

The segregation mode of plant height in the crosses of rice varieties 1. Indica X Indica crosses (수도 품종간 교잡에 있어서의 초장의 유전 분리 1. Indica x Indica 조합)

  • Heu, Mun-Hue;Beachell, H.M.;Chang, T.T.
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.5 no.1
    • /
    • pp.37-43
    • /
    • 1969
  • A genetrc study was made on plant height of indica rices with a few segregating F2 populations involving three semi-dwarf varieties such as T(N)I, CP231-SLO17, and B569A12. These populations were grown in breeding nursery at the International Rice Research Institute (IRRI) during several seasons. 20 to 25 day old seedlings grown at upland seedbed were transplanted to the paddy in a single plant hill spacing 30 cm ${\times}$ 25cm. Measurements of plant height were made from the juncture between culm and roots to the tip of the longest panicle of a plant pulled out from the paddy when they are matured. The results are summarized as follows: 1. Tall indica varieties originated from the south-east Asian countries could be classified into two groups depending upon their allelism whether they showed monogenic segregating ratio of 3:1 or not when they were crossed to T(N)1. 2. Most of U.S. varieties, especially semi-dwarf breedirg materials such as CP231 ${\times}$ SIO17 and B569A12, did not show monogenic segregating mode of 3:1 ratio when they were crossed to T(N)1 or to other varieties bearing the same genetic allele of T(N)1 such as Peta and Sigadis.

  • PDF

Metamodeling Construction for Generating Test Case via Decision Table Based on Korean Requirement Specifications (한글 요구사항 기반 결정 테이블로부터 테스트 케이스 생성을 위한 메타모델링 구축화)

  • Woo Sung Jang;So Young Moon;R. Young Chul Kim
    • KIPS Transactions on Software and Data Engineering
    • /
    • v.12 no.9
    • /
    • pp.381-386
    • /
    • 2023
  • Many existing test case generation researchers extract test cases from models. However, research on generating test cases from natural language requirements is required in practice. For this purpose, the combination of natural language analysis and requirements engineering is very necessary. However, Requirements analysis written in Korean is difficult due to the diverse meaning of sentence expressions. We research test case generation through natural language requirement definition analysis, C3Tree model, cause-effect graph, and decision table steps as one of the test case generation methods from Korean natural requirements. As an intermediate step, this paper generates test cases from C3Tree model-based decision tables using meta-modeling. This method has the advantage of being able to easily maintain the model-to-model and model-to-text transformation processes by modifying only the transformation rules. If an existing model is modified or a new model is added, only the model transformation rules can be maintained without changing the program algorithm. As a result of the evaluation, all combinations for the decision table were automatically generated as test cases.

Using Next Generation Technologies to Resolve Construction Labor Shortage Problems (건설기능인력 수급 불균형 문제 해결의 대안 제시)

  • Lee, Bok-Nam;Woo, Sungkwon;Chang, Chul-Ki;Koo, Bon-Sang
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.26 no.6D
    • /
    • pp.969-974
    • /
    • 2006
  • Labor shortages are a serious problem for Korea's construction industry. The problem is both quantitative and qualitative. There is a shortage in supply as due to a decrease in the influx of new labor, and existing workers are less productive as they age. The problem will only get worse as more and more major public projects are being planned. Options for increasing the labor supply are somewhat limited, and thus efforts need to be made to adopt new technologies that can improve the productivity and efficiency of field work and their processes. This paper introduces seven innovation technologies that have the best potential to increase productivity and thus reduce the burden of labor shortage problems. These include 1) Substitution by use of robotics and automation, 2) development and applications of Innovative materials to reduce on site field work, 3) increase in productivity through the implementation of Information Technology, 4) improved productivity through the application of modules, and prefabrication, 5) prevention of rework and redesign, 6) diversification of labor by integrating labor skills, and 7) improved productivity by standardizing site processes.

DIFFERENT WAYS OF SURGICAL MANAGEMENT FOR CHILDREN WITH CONFOUND ODONTOMA IN THE MANDIBLE (아동의 하악골에 발생한 복합 치아종의 외과적 처치에 관한 증례보고)

  • Chung, Woo-Sung;Choi, Yeong-Chul;Lee, Keung-Ho
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.26 no.3
    • /
    • pp.499-506
    • /
    • 1999
  • The odontoma is relatively a common benign odontogenic tumor and caused by overgrowth of odontogenic tissues. The recent classification by World Health Organization divides odontoma into 2 groups such as compound odontoma and complex odontoma. Compound odontoma comprises dental tissues, resembling the morphology of a tooth and has predilection for the anterior maxilla. In contrast, complex odontoma has unorganized mass, not resembling the normal tooth and has predilection for the posterior mandible. The etiology of odontoma is unknown and almost asymptomatic. So, it usually is found in routine radiographic examination, and most common presenting symptom is impacted or unerupted permanent teeth and retained primary teeth. It can occurs almost anywhere in jaws. It is desirable that odontoma should be removed by surgical enucleation including follicle and surrounding soft tissues. Considering the age and behavioral cooperation of patient, the development of permanent dentition, the location of odontoma in jaw, the need for the concomitant operative dentistry, operation is performed in outpatient department with/without sedation or under general anesthesia with endotracheal intubation. In this case report, 2 patients with compound odontoma were treated by surgical enucleation including follicle and surrounding soft tissues. One patient, about 5 years old, was treated under general anesthesia and concomitant operative dentistry was performed. The other patient, about 11 years old, was treated under local anesthesia in outpatient department. In 2 cases, after 4 months, surgical defects were filled with new bone and normalization of eruption path of impacted permanent teeth was observed.

  • PDF

Evaluation of Seasonal Landscape Images and Preference of Streetscapes - Focusing on Street of Prunus Species - (계절별 가로 경관이미지 및 선호도 평가 - 벚나무류 가로를 대상으로 -)

  • Shin, Jae-Yun;Jung, Sung-Gwan;Kim, Kyung-Tae;Lee, Woo-Sung
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.39 no.3
    • /
    • pp.51-63
    • /
    • 2011
  • The purpose of this study is to create a landscape image that considers the selection of techniques that can enhance landscape reproduction in streetscape evaluation using 3 dimensional simulations and to evaluate ways to verify similarities and the psychological changes on the part of users by season. In the comparison of technique, the Low(apply normal map) technique was selected for the natural representation of trees in a near and middle view and the Plane technique was selected for the distant view. As the result of the verification, all indicators of physical similarity were evaluated over 4.50 points and most indicators of psychological similarity were found to have no difference except for indicators of 'disordered orderly' and 'dirty - clean'. According to the results of analyzing the landscape simulation by season, images of 'bright', 'beautiful', and 'static', etc., were evaluated high for the spring streetscape. The images of 'open', 'refresh', and 'animate' appeared high in summer and images of 'warm' and 'dark' were found to be high in fall. On the other hand, all images were evaluated as low except for the 'orderly' image. In the preference of streetscape by season, summer and spring were highly preferred at 5.01 and 4.98 with winter as the lowest at 3.48. As the results of the analysis of preference factor, the spring streetscape was found to be a major influence in preference by 0.540 in 'aesthetics'. In the case of summer, 'order' was found to be high at 0.417 while influences in preference included 'variety' and 'aesthetics' in fall and 'variety', 'aesthetics', and 'order' in winter. A determination of suitable spatial planning using a comparative analysis of various city streets will be enabled through the methods of this study.

Allelopathic Effects of Amaranthus spinosus L. for Improvement of Natural Herbicide (천연제초제 개발을 위한 가시비름의 알레로패시 효과)

  • Kang, Jeong-Hwan;Kim, Hyoun-Chol;Song, Jin-Young;Woo, Seong-Bae;Kim, Tae-Keun;Kang, Jin-Yong;Ha, Young-Sam;Song, Chang-Khil
    • Korean Journal of Organic Agriculture
    • /
    • v.16 no.1
    • /
    • pp.127-142
    • /
    • 2008
  • This study was carried out to germination characteristics by temperature conditions and allelopathic effects of aqueous extracts on Amaranthus spinosus L. in order to investigate the competitive dominant in plant ecosystem and possibility application of natural herbicide. A. spinosus L. sprouted after 24 hour from seeding in $30{\sim}45^{\circ}C$ treatment. The germination ratio of A. spinosus L. was the highest estimated at 63.3(${\pm}2.9$)% in $40^{\circ}C$ treatment, followed by 33.3(${\pm}2.9$)% in $35^{\circ}C$, 1.7(${\pm}2.9$)% in $30^{\circ}C$ and 5.0(${\pm}0.0$)% in $45^{\circ}C$ treatment. It was generally decreased the Relative Germination Ratio(RGR), the Relative Elongation Ratio(RER), the Relative Fresh weight Ratio(RFR) of receptor plants by the aqueous extracts of concentration of A. spinosus L. but it was differently inhibited the kind of receptor plant species. And it was different effected among growing regions that aqueous extracts of concentration of A. spinosus L. inhibited more root than shoot. The total phenolic compounds content of A. spinosus L. was decreased gradually middle, first and last of growth stage, and gradually decreased to leaves, roots and stems. We think that A. spinosus L. appeared high germination ratio at a short period and showed allelopathic effects on other plants. Therefore A. spinosus. L. hold the competitive dominant of plant ecosystem in Jeju Island and possibility application of natural herbicide.

  • PDF

Study of the Effects of Ambient Temperature and Car Heater Power on the Train Cabin Temperature (외기 온도와 난방 출력의 철도차량 객실 온도에 대한 영향 연구)

  • Cho, Youngmin;Park, Duck-Shin;Kwon, Soon-Bark;Jung, Woo-Sung
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.15 no.9
    • /
    • pp.5877-5884
    • /
    • 2014
  • Recently, abnormally cold weather has been reported more frequently in winter due to the climate change and abnormal weather changes. On the other hand, the heating capacity of a railcar may be not enough to warm the cabin under severe cold climatic conditions, which is one of the reasons for the passengers' complaints about heating. In this study, the effects of ambient temperature and heater power on the cabin temperature was investigated to obtain the minimum ambient temperature for the tested railcar. The test railcar was placed in a large-climatic chamber, and various ambient temperature conditions were simulated. The effects of the heater output were investigated by monitoring the cabin temperature under a range of heater output conditions. The mean cabin temperature was $14.0^{\circ}C$, which was far lower than the required minimum temperature of $18^{\circ}C$, under a $-10^{\circ}C$ ambient temperature condition with the maximum heat power. When the ambient temperature was set to $0^{\circ}C$ and $10^{\circ}C$, the maximum achievable cabin temperature was $26.1^{\circ}C$ and $34.0^{\circ}C$. Through calculations using the interpolation method, the minimum ambient temperature to maintain an $18^{\circ}C$ cabin temperature was $-6.7^{\circ}C$ for this car. The vertical temperature difference was higher with a higher power output and higher ambient temperature. The maximum vertical temperature difference was higher than $10^{\circ}C$ in some cases. However, the horizontal temperature difference vs. low temperature (< $2^{\circ}C$) was independent of the power output and ambient temperature. As a result, it is very important to reduce the vertical temperature difference to achieve good heating performance.

A The Moderating Effects of Perceived Organizational Support in the Effect of Work Value on Turnover Intention -Focuse on Food-service Industry Newcomers Less than 1 Year- (직업가치가 이직의도에 미치는 영향에 있어 조직후원인식의 조절효과 -외식업체 1년 미만 신입종사원을 중심으로-)

  • Lim, Tae-Geun;Choi, Woo-Sung
    • Management & Information Systems Review
    • /
    • v.35 no.3
    • /
    • pp.37-56
    • /
    • 2016
  • This study verified the effect of occupational value, as felt by new employees working in the food service industry, on turnover intent and also the moderating effect of perceived organizational support between occupational value and turnover intent. The analysis drew out the following results. First, the study verified that, among inherent values, only social commitment had a positive(+) direction of influence on turnover intent, and second, among extrinsic values, only face-saving and stability seeking had a positive(+) direction of influence on turnover intent. Third, as a result of verifying the effect of inherent values on turnover intent according to emotional support, the study revealed that turnover intent increased, as the perception of emotional support increased, on condition that the item, value of knowledge seeking, among inherent values, was perceived highly, On the other hand, if the item, relationship-centered, scored highly among inherent values, then the higher the perception of emotional support, the lower the turnover intent. Fourth, as a result of verifying the effect of extrinsic values on turnover intent according to emotional support, the study revealed that turnover intent decreased, as the perception of emotional support increased, on condition that the value of economic priority, among extrinsic values, was perceived highly. On the other hand, if the item, face-saving, scored highly among extrinsic values, then the higher the perception of emotional support, the higher the turnover intent. Fifth, as a result of verifying the differing effect of inherent values according to methodical support, the study revealed that turnover intent increased as the perception of methodical support increased, if the item, knowledge-seeking among inherent values was perceived highly. Sixth, as a result of verifying the differing effect of extrinsic values according to methodical support, the study revealed that turnover intent decreased as the perception of methodical support increased, if the item, economic priority among extrinsic values was perceived highly. On the other hand, if the item, face-saving, among extrinsic values, was perceived highly, the higher the perception of methodical support, the higher the turnover intent.

  • PDF

A STUDY ON THE MAXIMUM BITE FORCE AND FACIAL MORPHOLOGY ACCORDING TO CHEWING SIDE PREFERENCE (저작습관에 따른 교합력과 안면골격형태의 비교연구)

  • Jeong, Mi-Ra;Son, Woo-Sung
    • The korean journal of orthodontics
    • /
    • v.25 no.3 s.50
    • /
    • pp.311-321
    • /
    • 1995
  • This study was undertaken to investigate the distribution of the chewing side preference and variations in the maximum bite force and facial morphology according to chewing side preference since unilateral chewing may cause morphologic and functional anomalies. 50 dental students who had no signs or symptoms of masticatory system and Angle's Class I relationship in posterior segments were selected, and divided into two groups, that is, 25 in bilateral chewing group(19 male and 6 female) and 25 in unilateral chewing group(10 male and 15 female). Maximum bite force was estimated ana posteroanterior cephalogram were measured ana statistically analyzed. The results were as follows : 1. Their were more students with bilateral chewing side preference($68\%$) and unilateral chewing side group consisted of right side preference($68\%$) and left side preference($32\%$). 2. There was no significant difference in the strength of max. bite force between the right and left side in bilateral chewing group. The bite force of the chewing side nab greater in the unilateral chewing group but less in the non-chewing side compared to those of bilateral chewing group with Bo significant difference. Max. bite force of chewing side was greater than that of non-chewing side in the unilateral chewing group(Female p<0.05). Max. bite force of males was about twice in that of females in both groups(p<0.05). Max. bite force of chewing side of the unilateral chewing group was similar to that of the bilateral chewing group, but that of non-chewing side was less than that of the bilateral chewing group. 3. In comparison of the facial morphology, there was no statistically significant difference in the size between the right and left side of the bilateral chewing group and between chewing and non-chewing side of the unilateral chewing group.

  • PDF

Effect of Satisfaction in Neighborhood Park Environments on Physical Activity and Health - The Case of Seongsan-gu and Uichang-gu in Changwon City - (근린공원 환경의 만족도가 신체활동과 건강에 미치는 영향 - 창원시 성산구와 의창구를 대상으로 -)

  • Park, Kyung-Hun;Lee, Woo-Sung;Kim, Tae-Hwan;Kim, Eun-Jung
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.42 no.3
    • /
    • pp.64-75
    • /
    • 2014
  • The purpose of this study is to analyze the effects of satisfaction in neighborhood park environments located in the Changwon-si of Gyeongsangnam-do, South Korea, on physical activity, the number of parks used for health improvement, and health levels based on Body Mass Index(BMI). Accordingly, a survey was conducted of 429 nearby residents and users of eight neighborhood parks located in urban areas of Seongsan-gu and Uichang-gu in the Changwon-si. The correlation between the environmental perception of neighborhood parks and physical activity and health, which was observed in the survey results, was analyzed using one-by-one linear regression analysis. By summarizing the study results, it was found that the primary reasons for avoiding park use were lack of time, time and effort required to reach the park(i.e., distance from the park), and lack of facilities within the park. Conversely, the primary reasons for using the park included accessibility, walking or strolling, leisure facilities, trees or shade, and diversity in exercise areas. In the case of park users, walking or strolling was the most common activity in the park. On average, park users walked to the parks for 10 minutes and exercised for an hour at least twice per week. With respect to the physical environment of the parks and surrounding areas, park users showed a high level of satisfaction with the distance between their houses and parks and the street environment. On the contrary, they exhibited low levels of satisfaction with water spaces and sightseeing within the parks. Subsequently, it was shown that the number of people using the parks for physical activities and health improvement was positively influenced(within a 5% significance level) by the intent to use the park for exercise, time spent in the park, satisfaction with park use and health improvement, distance to the park, and the convenience of using the park for the elderly. However, only the health improvement gained from park use was found to exhibit a correlation with BMI at the 10% significance level. Continuous accumulation of practical case studies on physical activities in parks and their health improvement effects is required. Through this, park spaces that are under the threat of reduction or elimination owing to various development plans can be conserved and expanded. Furthermore, such case studies can be used to provide data as the basis for deriving park plans and designs that improve parks' functions as sites of physical activity and health improvement.