• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.261-265
• /
• 2014

As the need for miniaturization in water purification filter increases, the development of filter media for single filtration with multiple function was strongly required. In this study, the molded activated carbon composed of single unit was manufactured by extrusion-sintering process, and then the flow rate, density and porosity were investigated using the molded activated carbon manufactured at various extrusion temperature. We confirmed that it was possible to manufacture the single unit-molded activated carbon when the extrusion temperature was $140{\sim}230^{\circ}C$ more than $133^{\circ}C$ being of polymer binder melting point, and the optimal extrusion temperature for the molded activated carbon with maximum flow rate was $170^{\circ}C$ since the molded activated carbon had low density and high through porosity. Also we confirmed that the flow rate through the molded activated carbon was strongly dependent upon through pore porosity compared to total porosity for the molded activated carbon.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.5
• /
• pp.153-164
• /
• 2010

A program consumes energy by executing its instructions. The amount of cosumed power is mainly proportional to algorithm complexity and it can be calculated by using complexity information. Generally, the complexity of a S/W is estimated by the microprocessor simulator. But, the simulation takes long time why the simulator is a software modeled the hardware and it only provides the information about computational complexity quantitatively. In this paper, we propose a complexity estimation method of analysis of S/W on source code level and produce the complexity metric mathematically. The function-wise complexity metrics give the detailed information about the calculation-concentrated location in function. The performance of the proposed method is compared with the result of the gate-level microprocessor simulator 'SimpleScalar'. The used softwares for performance test are $4{\times}4$ integer transform, intra-prediction and motion estimation in the latest video codec, H.264/AVC. The number of executed instructions are used to estimate quantitatively and it appears about 11.6%, 9.6% and 3.5% of error respectively in contradistinction to the result of SimpleScalar.

• Journal of Aquaculture
• /
• v.11 no.1
• /
• pp.49-58
• /
• 1998

The spawning behavior and early life history of the Korean aucha perch, Coreoperca herzi were studied. The eggs were spawned in a one-layer mass, hanging from the underside of a largy stone and guarded by one male. According to the considerable size difference os eggs in the individual ovaries, it was concluded that they spawns several times within a spawning season of May~June. The ripe eggs were demersal and adhesive, and their diameter were 2.60~3.04mm with several oil globule of 0.10~0.64mm. Hatching in the tank with $19.0{\pm}1.0^{\circ}C.$ in men water temperature started from the 380 hours after fertilization. Newly-hatched larvae were measured 6.45~7.34mm in total length (TL, mean : 6.85mm), and mouth and anus were open. Melanophores were present on the head, around the yolk, and on the dorsal part of the abdominal region. 3 days old larvae were measured 7.00~7.40mm in TL (mean : 7.25mm), and they fed Daphnia sp. and Brachionus plicatilis actively. 6 days old larvae transformed to postlarval stage and they were 7.94~10.10mm in TL (mean : 9.00mm). As yolk sac were nearly absorbed, the caudal notochord flex at 45. Aggregate numbers of all fin rays were completed at over 16.90~19.80mm in TL (30 days after hatching), at which time the larvae reached the juvenile stage. In fifty days old larvae(24.60~27.10mm in TL) were similar in body form, lateral line and color to adult.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.5 no.1
• /
• pp.29-38
• /
• 1972

The protein composition of abalone muscle was estimated with the following result: on a series of samples analyzed, water-soluble protein, $19\~22\%$, salt-soluble protein, $27\~39\%$: alkali-soluble protein, $20\~26\%$ : and stroma $20\~28\%$ : respectively. It was demonstrated by ultracentrifugal analysis that approximately $65\%$ of the salt-soluble protein is accounted for by paramyosin, $30\%$ by actomyosin, and $5\%$ by myosin, respectively. The ultracentrifugally homogenous paramyosin was prepared by BAILEY's ethanol-dried method. It showed a $S^{\circ}\;_{20,\;{\omega}$ of 3.14s, and was completely salted in with KCl beyond $0.35{\mu}$. The intrinsic viscosity at $25^{\circ}C$ was estimated at 3.1. The paramyosin is rich in several amino acids such as arginine, aspartic acid, glutamic acid, etc., and lacking of both proline and tryptophane, in rough accord with other paramyosins reported. The abalone paramyosin did not show ATPase activity over a pH range of 5 to 9,5 even in the presence of Ca++ or Mg++. So was the case with the paramyosin specimen prepared by BAILEY's wet-extraction method.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.3
• /
• pp.267-274
• /
• 2002

This research is described on the applicability of a electrochemical techniques for evaluating nondestructive material degradation with various polarization characteristics for Cr-Mo-V steel. The applied electrochemical technique is anodic polarization test which are widely used to evaluate the corrosion rate and/or sensitization at depleted zone of strengthening elements mainly caused by thermal experience for stainless steels. The evaluation of material degradation is performed by small punch test which has been well known as micromechanics test method using specimen size of $10{\times}10{\times}0.5mm$. The 1,000hrs aged material at $630^{\circ}C$ shows the highest material degradation$({\Delta}[DBTT]_{SP})$, but the 2,000hrs and 3,000hrs aged materials show the decrease of ${\Delta}[DBTT]_{SP}$ as aging time increases. It is observed that the difference of current density $({\Delta}I_{FP}\;and\;{\Delta}I_{SP})$.

• Sijohaknonchong
• /
• v.22
• /
• pp.143-171
• /
• 2005

Sip and Byul-Gok (New tunes), as folks musics, are musical concepts opposite to that of the Court musics. They have the tunes. typical and universal. and Byul-Gok for singing. has the words in which the properties of melodies in the structures of compositions are reflected harmoniously. The Song. or Shiga. in Koryo-Sa, History of Koryo. Acjee and Acjanggasa. named ByulGok. is divided into two types. according to the characteries of the forms.: Koryo Sokyo. or the folk songs in Koryo. such as Chengsanbylulgok. and Segyoungbyulgok. and Kyonggichega, or nobility songs in Koryo and Chosen Dynasty. such as Hallimbyulgok. Kwandongbyulgok. and Jucgyebyulgok. In addition. Gasa. or the nobility and folk songs in Chosen Dynasty. such as K wandongbyulgok. also has the title. Byul-Gok. Even though these types of the songs have the same tittle. Byul-Gok, it is not appropriate that Byul-Gok is used as a term described as a branch of the literature: in light of music. they have the properties in common in the sense that they are opposite to the Court music. but. in light of literature. their forms are very different from one another. Therefore, it is appropriate that they are classified according to the characteristics of the forms, winters, the ideology of people who enjoy them, and periods: Sokyo, Kyonggichega, and Gasa. Byul-gok means not only the folks songs opposite to the court musics, but also the songs by setting words to the melodies present. Orignal tunes and their new tunes are not different musical compositions, but the same ones with the melodies which Korean acquired transcendentally. It is general tendency, at those times, that after compositions were made, words are set to them. Such words represent the politic thought in which courtesy and music are considered important. and the spirit with which the ruler and the people enjoy together.

• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.305-313
• /
• 2013

In this study, we investigated effects of thermal annealing on the thermal properties and microphase separation behaviors of glycidyl azide-based thermoplastic polyurethane elastomers (ETPE). The GAP-based ETPEs were characterized by attenuated total reflectance-fourier transform infrared spectroscopy (ATR-FTIR), differential scanning calorimeter (DSC), dynamic mechanical analysis (DMA), and gel permeation chromatography (GPC). The effects of annealing temperature conditions ($80{\sim}130^{\circ}C$, 1 h or 24 h) on the properties of the ETPEs were investigated. The intensity of azide group absorption peak of ATR-FTIR spectra and the solubility of ETPE for methylene chloride and dimethylformamide solvent decreased after the annealing at $130^{\circ}C$ for 1 h and at $105^{\circ}C$ for 24 h. With increasing the annealing temperature from $80^{\circ}C$ to $110^{\circ}C$, the high temperature rubbery plateau region of storage modulus curves from DMA thermogram for GAP-based ETPEs was extended to the higher temperature.

• Applied Chemistry for Engineering
• /
• v.31 no.3
• /
• pp.341-345
• /
• 2020

An in situ regeneration of activated carbon bed using an ozonated water was studied in order for avoiding the carbon loss, contaminant emission and time consuming for discharge-regeneration-repacking in a conventional thermal regeneration process. Using phenol and polyethylene glycol (PEG) as adsorbates, the adsorption breakthrough and in situ regeneration with the ozonated water were repeated. These organics were supposed to degrade by the oxidation reaction of ozone, regenerating the bed for reuse. As the number of regeneration increased, the adsorption capacity for phenol was reduced, but the change was stabilized showing no further reduction after reaching a certain degree of decrement. The reduction of adsorption capacity was due to the increase of pore size resulting in the decrease of specific surface area during ozonation. The adsorption capacity of phenol decreased after the ozonated regeneration because the in-pore adsorption was prevalent for small molecules like phenol. However, PEG did not show such decrease and the adsorption capacity was constantly maintained after several cycles of the ozonated regeneration probably because the external surface adsorption was the major mechanism for large molecules like PEG. Since the reduction in the pore size and specific surface area for small molecules were proportional to the duration of contact time with the ozonated water, careful considerations of the solute size to be removed and controlling the contact time were necessary to enhance the performance of the ozonated in situ regeneration of activated carbon bed.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.398-403
• /
• 2020

In this study, six kinds of rice grown in Cheongwon area were extracted using glycolytic and proteolytic enzymes, and also antioxidant effects and water holding capacity of rice protein extracts were compared and analyzed. Protein contents of rice cultivars protein extract showed that black rice (BR) extract was the highest at 4,900 ㎍/mL, and flavored brown rice (FBR) extract was the lowest at 3,700 ㎍/mL. 2,2-diphenyl-1-picryl-hydrazyl-hydrate free radical scavenging activity was confirmed the superior activity of more than 80.0% at a concentration of 2 mg/mL with BR and red brown rice (RBR) extracts. 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) radical scavenging activity at a concentration of 2 mg/mL with BR and RBR extracts was more than 70.0% The water holding capacity for extracts using RBR, red-kerneled brown rice (RKBR), BR and FBR was more than 110.0%. Overall, the rice protein extract using BR has excellent antioxidant and water holding capacity which can be used as a potential skin moisturizer and antioxidant functional cosmetic material.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.10 no.1
• /
• pp.5-11
• /
• 1999

Background and Objectives : Recently, many people suffering from voice change visit otolaryngologist. So, it is important to study vocal function in patients with glottic or laryngeal disease. Aerodynamic investigation is valuable information about the efficiency of the larynx in translating air pressure to acoustic signal. The purpose of this study was to investigate the aerodynamic data in patients with vocal polyp, compare this data with that of the normal Korean. Materials and Methods : In aerodynamic study, maximum phonation time, mean air flow rate, phonatory flow volume and subglottal pressure were tested by using Aerophone II voice function analyzer in 157 normal korean and 143 patients with vocal polyp, aged from 20 to 69 years randomly selected. Results and Conclusion : In vocal polyp, maximum phonation time was significantly decreased and mean air How rate was increased. Phonatory flow volume was significantly decreased and subglottic pressure was increased only in female with vocal polyp. These data will be served as basic data of evaluation after treatment and postoperative assessment of the patients with vocal polyp.