• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7C
• /
• pp.481-487
• /
• 2011

Cyclic delay diversity (CDD) is a simple transmit diversity technique for an OFDM system using multiple transmit antennas. However, the performance of post-FFT estimation, i.e., integer frequency offset (lFO) is deteriorated by high frequency selectivity introduced by CDD. In this paper, the IFO estimation scheme is proposed for OFDM-based DRM+ system with CDD. Based on the pilot subset partitioning, the proposed IFO estimation scheme reduces the effect of performance degradation caused by frequency selectivity in OFDM systems with CDD . The simulation results show that the performance of the proposed IFO estimator is significantly improved when compared to that of the conventional IFO estimator.

• Journal of the Korean Geosynthetics Society
• /
• v.23 no.1
• /
• pp.39-47
• /
• 2024

In this study, physical property tests and standard consolidation tests were conducted on the marine clay of Busan New Port and North Port, the middle and lower reaches of the Nakdong River including Gimhae and Yangsan, and Ulsan regions. The moisture content, a property unrelated to sample disturbance with small individual test errors, was used for regression analysis with the compression index, virgin compression index, consolidation coefficient, expansion index, and secondary compression index, among others. Subsequently, the correlation and accuracy were evaluated. Upon analyzing the correlation between the moisture content, void ratio, and liquid limit commonly used physical properties for calculating compression indexes, it was confirmed that the liquid limit had the lowest correlation. Through a linear regression analysis of the consolidation constants using the current moisture content in the natural state, a high correlation was demonstrated. Relationship equations were then presented to determine settlement and settlement time. This study suggests that moisture content can be utilized as an alternative for evaluating and calculating consolidation constants when examining ground settlement in sedimentary clays distributed in the Busan and Gyeongnam regions.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.6
• /
• pp.13-27
• /
• 2012

Integer programming-based local search(IPbLS) is a kind of local search based on simple hill-climbing search and adopts integer programming for neighbor generation unlike general local search. According to an existing research [1], IPbLS is known as an effective method for the multidimensional knapsack problem(MKP) which has received wide attention in operations research and artificial intelligence area. However, the existing research has a shortcoming that it verified the superiority of IPbLS targeting only largest-scale problems among MKP test problems in the OR-Library. In this paper, I verify the superiority of IPbLS more objectively by applying it to other problems. In addition, unlike the existing IPbLS that combines simple hill-climbing search and integer programming, I propose methods combining other local search algorithms like hill-climbing search, tabu search, simulated annealing with integer programming. Through the experimental results, I confirmed that IPbLS shows comparable or better performance than the best known heuristic search also for mid or small-scale MKP test problems.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1993.04a
• /
• pp.214-214
• /
• 1993

• 어항어장
• /
• s.18
• /
• pp.59-68
• /
• 1992

• Defense and Technology
• /
• no.3 s.193
• /
• pp.10-19
• /
• 1995

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.292-296
• /
• 2009

우리나라의 용수공급체계는 주로 여름에 집중된 강우를 댐이나 저수지에 저류하였다가 연중고르게 사용자들에게 공급하는 방법을 취하고 있다. 이때 도시지역의 생활용수는 갈수기에도 가장먼저 공급되어져야하는 우선순위를 가지는 반면, 농업용수는 가장 우선적으로 그 사용을 제한받는다. 하지만, 도시화로 인해 도시의 하수처리장 배출수량은 지속적으로 증가하고 있으며, 그 처리수의 대부분은 하천으로 방류되어 유실되고 있다. 방류수 수질기준에 맞추어 방류되는 처리수는 대량방류로 인해 자주 하천에 수질문제를 야기하기도 한다. 그러나 실제로 하수처리장의 처리수는 갈수기에 매우 유용하게 사용될 수 있는 수원 중 하나이다. 그러므로 그 처리수의 재이용에 관한 연구를 적절히 수행한다면, 갈수기에도 농업용수사용의 제한을 최소화할 수 있을 것이다. 그러므로 본 연구에서는 처리수 재이용 모형을 혼합정수계획법으로 개발하고, 하수처리장 처리수의 농업용수나 공공용수로의 사용을 제안하였다. 개발된 처리수 재이용 모형에서는 하천으로 방류되던 처리수를 농업용수나 공공용수로 재사용하는 시스템을 구축한다는 가정 하에, 그 공사비를 최소화하는 것을 목적으로 하였다. 또한 관말의 최소유지압력 등 수리학적인 제약조건을 만족시키도록 설계하였으며, 이 때문에 야기되는 비선형성을 선형화하여 계산시간이 짧은 동시에 전역해에 가까운 해를 찾을 수 있도록 하였다. 개발된 모형은 가상의 처리수 재이용 모형에 적용되어 시스템의 설계자에게 갈수기 용수공급의 최적 대안을 제시해 줄 수 있는 가능성을 보였다.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.1
• /
• pp.27-31
• /
• 2008

In this study, evaluation of samples' reflection of in-situ condition was performed for those by 225 mm KICT large sampler and NX size piston sampler. Disturbance analysis was conducted for the clay sampled by two kinds of sampler throughout consolidation tests, uniaxial tests and triaxial test, under the same condition. From the analysis it can be seen that not only the initial void ratio and preconsolidation pressure from KICT large sampler but strength parameters from both uniaxial and triaxial compression tests are also about 10% higher than those of NX size piston sampler's.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2004.11a
• /
• pp.99-102
• /
• 2004

본 논문에서는 SIMD 명령어를 이용하여 H.264 복호화기의 역 정수 변환 과정과 역 양자화 과정을 고속으로 처리 할 수 있는 방법을 제안한다. 제안하는 고속 역 변환 방법을 ZERO 블록에 대하여 역 변환과 역 양자화 과정을 수행하지 않음으로써 속도 향상을 얻을 수 있다. 움직임이 적은 Akiyo 영상에서는 QP=0일 때 참조 코드(reference code)의 역 정수 변환과 역 양자화 과정에 비하여 7.52배, QP=24인 경우 8.1배의 속도 향상을 얻을 수 있다. 또한 움직임이 많은 Stefan 영상에 대해서는 QP=0일 때 고속 역 변환 방법이 참조 코드의 역 정수 변환과 역 양자화 과정에 비하여 6.7배. QP=36인 경우 7.83배의 속도 향상을 얻을 수 있다

• Geotechnical Engineering
• /
• v.9 no.2
• /
• pp.27-40
• /
• 1993

This paper proposes a new procedure carrying out a series of consolidated-undrained triaxial tests with a specimen. In this procedure high confining pressure applied to the specimen keeps constant during the test and each stage of consolidation can be controlled by partial drainage. With this procedure the test time is remarkably reduced by performing a series of triaxial tests with a single specimen. In order to verify the appliesbility of the procedure, standard triaxial compression tests and conventional multi -stage triaxial testy are performed for both undisturbed and disturbed samples and the results are compared with those of the proposed procedure. The comparison shows that strength parameters determined by the proposed procedure are well agreed with those of the other tests and thus it can be said that the procedure is very effective and practical in determining strength parameters.