• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2016.05a
• /
• pp.79-80
• /
• 2016

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.343-346
• /
• 2008

Unsteady 3D flowfields generated by transverse fuel injection into a supersonic mainstream are simulated with a DES turbulence model. Comparisons are made with experimental results in term of the temporal eddy position and eddy formation frequency. Results indicate that the DES model correctly predicts the convection characteristics of the large scale eddies. However, it is also observed that the numerical results slightly overpredict the eddy formation frequency.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1989.07a
• /
• pp.113-114
• /
• 1989

원자력, 화력발전소, 제철소 등의 다양한 임해 공업시설로부터 방출되는 냉각용 온배수는 연안일대 해수의 열균형을 파괴시켜 생태계의 보존 및 환경관리에 좋지 못한 영향을 야기케 된다. 이러한 영향은 해안 또는 만내의 수중온도를 전반적으로 높일뿐 아니라 가동중단시 갑자기 수온을 떨어뜨려 해양생물상에 피해를 줄수도 있다. 또한 온배수에 의하여 온도가 상승된 해수가 취수구를 통하여 재순환되어 냉각기능의 부진을 초래하게되면 발전효율 또는 기계가동율을 저하시키게 된다. 이러한 측면에서 온배수의 확산에 대한 정성, 정량적인 예측은 환경영향평가, 취.배수구 설계조건의 산정 등에 매우 중요한 문제라 하겠다. 본 연구는 정지수역으로 유입하는 3차원 정상류 표면온배수 해석모형의 개발로서 개발된 모형의 수치실험을 통하여 온배수 확산의 물리적 특성을 규명한다. 지배방정식에 나타나는 Reynolds 응력항($)과 온도유동 프럭스항($)의 해석에서 필요한 난류모델은 k-$\varepsilon$ 모형에 난류 평균자승 온도유동($) 및 그 감쇄방정식을 추가한 4-방정식 모델로서 구성하였다. 아울러 3차원 정상류 모형에서 야기되는 타원형 방정식을 포물형 방정식의 형태로 전환하여 효과적으로 해석할 수 있도록 모델의 특성을 정리하였다. 본 모델의 검증을 위하여 Lal 및 Rajaratnam(1977)의 물리적 실험값과 비교해본 결과 온배수 거동의 물리적현상이 잘 일치하였다. 또한 McGuirk 및 Rodi(1979)에 의해 개발된 2-방정식 k-$\varepsilon$ 난류모형의 해석결과에 대하여 비교분석을 실시하였다.

• Journal of Ocean Engineering and Technology
• /
• v.7 no.1
• /
• pp.13-24
• /
• 1993

The dispersion in the oscillatory flow generated by gravitational waves above the spatially periodic repples is studied. The steady parts of equations describing the orbit of the passive particle in a two dimensional field are assumed to be simply trigonometric functions. From the view point of nonlinear dynamics, the motion of the particle is chaotic under externally time-periodic perturbations which come from the wave motion. Two cases considered here are; (i) shallow water, and (ii) deep water approximation.

• Journal of Navigation and Port Research
• /
• v.31 no.1 s.117
• /
• pp.29-33
• /
• 2007

An OWC-type Wave Energy Conversion passes through 3 steps energy conversion process. This paper deal with the internal oscillating flow and effect of shape of air chamber and duct at setting place of turbine by numerical analysis using commercial CFD code, FLUENT. Air chamber and duct in OWC-type wave energy conversion are adopting sudden expanded and contracted form for high-efficiency. So, whole oscillating flow from OWC-type chamber to outlet duct through duct was solved by steady and unsteady analysis in order that flow efficiency of air chamber and duct was made better.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.1
• /
• pp.9-14
• /
• 2009

A numerical investigation was performed based on the Reynolds-Averaged Navier-Stokes(RANS) equations for the two-dimensional unsteady flow around a vertical axis turbine(VAT) with three or four blades. VAT is one of the promising devices for tidal current energy conversion. The geometry of the turbine blade was $NACA65_3$-018 airfoil, for which CFD analysis using Fluent was carried out at several angles of attack and the results were compared with the corresponding experimental data for validation and calibration. Then CFD simulations were carried out for the whole vertical axis turbine with a two-dimensional setup. The CFD simulation demonstrated the usefulness of the method to study the typical unsteady flows around VATs and the results showed that the optimum turbine efficiency could be achieved for carefully selected combinations of the number of blade and Tip-Speed Ratio(TSR).

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.460-465
• /
• 2001

In the present study, steady and unsteady flow characteristics inside an industrial mixer with flat turbine type impeller are studied. For the flow analysis, STAR-CD is used with an automatic mesh generator developed in the present study. flow results are compared to the an available experimental data to show validity or the present simulation.

• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.539-546
• /
• 2003

The numerical model of the flow analysis by finite element technique is described. The Galerkin method is employed for spatial discretization Two step explicit finite element scheme is used to discretize the time function, which has advantage in problems treating large numbers of elements and unsteady state. Two dimensional hydrodynamic model considering moving boundary condition is developed. Also it applied flow model which develop on flow portion of ideal fluid in the model flume and verified, and the results of this study confirm the efficiency of moving boundary treatment in Jeju harbor. The computed results have shown the good adaptability of moving boundary condition From these studies, it can be concluded that the present method is a useful and effective tool in tidal flow analysis.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.4
• /
• pp.46-52
• /
• 2003

This paper presents the numerical thermal analysis for regeneratively cooled rocket thrust chambers. An integrated numerical model incorporates computational fluid dynamics for the hot-gas thermal environment, and thermal analysis for the liner and coolant channels. The flow and temperature fields in rocket thrust chambers is assumed to be axisymmetric steady state which is presumed to the combustion liner. The heat flux computed from nozzle flow is used to predict the temperature distribution of the combustion liner As a result, we present the wall temperature of combustion liner and the temperature change of coolant.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.325-326
• /
• 2006

현 화학플랜트에서 사용되고 있는 ABS 수지 응집 공정의 경우 교반기 내부의 불균일한 유동분포와 유동메커니즘의 문제점은 공정 제품의 생산성을 저하 시키는 원인으로 작용하고 있다. 그러나 우수한 성능의 산업용 교반기를 설계하기 위해선 반드시 교반성능에 영향을 미치는 다양한 내부의 유동특성의 정량적인 실험 데이터 확보가 필요하나, 3차원적 비정상 특성을 나타내는 복잡한 구조의 내부 유동특성에 관한 정량적 해석은 현재까지도 상당한 어려운 문제로 남아있다. 이에 이런 문제점을 개선하여 생산성을 향상시키기 위해서는 PIV 기법을 이용한 교반기 내부의 유동분포와 유동메커니즘을 규명하여 교반기 내부의 최적화된 유동을 형성시키는 임펠러의 형상을 개발하고자 한다.