• Journal of the Korean Society for Railway
• /
• v.11 no.1
• /
• pp.13-18
• /
• 2008

In this study, unsteady wind pressure analyses on platform screen door (PSD) have been conducted considering the flow intereference effects between the moving train and the configuration of subway station. The major role of PSD prevents passenger accidents, wind pressure, polluted dust and noise when the train is entering the station platform. Computational fluid dynamic method with moving gird algorithm has been adopted to accurately predict unsteady pressure levels exerted on the PSD. Closed and open type station configuration are considered. Also, wind pressure levels for passing and stopping drive motion of the entering train are presented and practically compared each other.

• Journal of Korea Water Resources Association
• /
• v.38 no.9 s.158
• /
• pp.727-736
• /
• 2005

In this study, the upwind McCormack scheme is introduced to combine the advantage of McCormack scheme, the second order accuracy and simplicity, and the advantage of the upwind scheme, to be applied to the discontinuous flows. This scheme also has another advantage of treating the source terms effectively. This model is approved through applying to the discontinuous flow case with the analytical solution, and the natural river with very strong source terms. Applications of the upwind McCormack scheme developed in this paper show good agreements with the analytical solution without numerical oscillation in existing McCormack scheme. Futhermore, applications to the natural river, the lower Han river with strong variation of bed and width, also show good results in case of both steady flow and unsteady flow. The upwind McCormack scheme in this study will be used for the analysis of flow in natural rivers effectively.

• Journal of Korea Water Resources Association
• /
• v.30 no.1
• /
• pp.23-34
• /
• 1997

The Nanji-Do ladnfill is an ill-conditioned reclaimed land without pollution intercepting facilities, and has high ground water table and deep stratum. The purpose of this study is to analyze the solute transport in steady-state groundwater flow and to predict the solute dispersion in Nanji-Do landfill using HST-3D model. As results, the groundwater flows radially outward from the center of No. 1 and No. 2 landfills, and large amount of runoff is moved into Han River. The predicted relative concentration of total dissolved solute(TDS) at two years later was 0.25 in the weathering zone, 0.26 in the lower alluvium, and 0.28 in the upper alluvium. Thus, the further pollution to bottom rock and Han River was predicted by comparing the corresponding present values of 0.29, 0.32 and 0.35.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.100-100
• /
• 2022

일반적으로 유체와 구조물간 상호작용의 수리동역학적 모의에서는 벽경계조건을 통하여 유동에 대한 구조물의 영향이 반영된다. 하지만 도심지에서 발생한 홍수를 예측하려는 경우 이러한 방법으로는 밀집한 구조물들 사이에 형성된 좁은 길들로 인하여 세밀한 격자망을 요하여 큰 계산량을 유발하고 빠른 예측 속도를 기대할 수 없게 한다. 최근 이러한 문제를 극복하기 위해 성긴 격자망에서도 구조물의 유체에 대한 영향을 반영할 수 있도록 하는 방법들이 큰 관심을 받고 있다. 그 중에서도 다공성 천수방정식은 벽경계조건 대신 다공도(posority)의 개념을 이용한 모형으로 도시범람모의에 있어 계산량과 정확도를 가장 적절하게 타협한 모형으로 보고되고 있다. 이러한 흐름에 맞추어 본 연구는 다공도 천수방정식을 해석하는 수치 기법을 개발하였고, 여기에 최근 쌍곡선계 방정식의 수치적 연구들에서 소개된 주요 특징들이 반영되도록 설계하였다. 우선, WENO 기법과 Runge-Kutaa 기법을 통하여 공간과 시간에 대한 고차 정확도를 만족시켰다. 이 때, 재구성 변수와 알고리즘를 새롭게 제시하여 정상흐름조건에 대한 플럭스항과 생성·소멸항간 절단오차에 의한 비물리적인 흐름생성을 억제하였다. 또한, 수치모의 중 음수심의 발생으로 인하여 수치모형이 불안정해지는 현상을 막기 위해, 양-보존성 제한자를 구축하였다. 마지막으로 도심지에서 즐비한 인위적인 구조물에 의해 나타나는 지형적인 불연속의 효과를 적절하게 반영할수 있도록 정상파 재구축의 단계를 구축하여 수치 기법에 반영하였다. 이렇게 구성된 수치기법은 리만문제의 해석해에 기반하여 기존의 주요 연구들의 결과와 비교되었고, 그 결과 본 연구의 방법이 정확성, 수렴성, 안전성의 측면에서 가장 우수함을 수치적으로 증명하였다.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.7
• /
• pp.75-89
• /
• 2013

This paper describes a GIS-based geohydrologic methodology, called YSGWF (YonSei GroundWater Flow) for predicting the rainfall infiltration-groundwater flow of slopes. This physical-based model was developed by the combination of modified Green-Ampt model that considers the unsaturated soil parameters and GIS-based raster model using Darcy's law that reflects the groundwater flow. In the model, raster data are used to simulate the three dimensional inclination of bedrock surface as actual topographic data, and the groundwater flow is governed by the slope. Also, soil profile is ideally subdivided into three zones, i.e., the wetting band zone, partially saturated zone, and fully saturated zone. In the wetting band and partially saturated zones the vertical infiltration of water (rainfall) from surface into ground is modeled. When the infiltrated water recharges into the fully saturated zone, the horizontal flow of groundwater is introduced. A comparison between the numerical calculation and real landslide data shows a reasonable agreement, which indicate that the model can be used to simulate real rainfall infiltration-groundwater flow.

• Journal of the Korean Institute of Gas
• /
• v.16 no.6
• /
• pp.41-47
• /
• 2012

There are PFD(Process Flow Diagram) and P&ID(Piping and Instrument Diagram) for designing and managing chemical process efficiently. They provide the operation condition and equipment specifications of chemical process, but they do not provide the reliability of chemical process. Therefore, in this study, Reliability Flow Diagram(RFD) which provide the cycle and time of preventive maintenance has been developed using Directed Graph Analysis methodology. Directed Graph Analysis methodology is capable of assessing the reliability of chemical process. It models chemical process into Directed Graph with nodes and arcs and assesses the reliability of normal operation of chemical process by assessing Directed Graph sequential. In this paper, the chemical process reliability transition according to operation time was assessed. And then, Reliability Flow Diagram has been developed by inserting the result into P&ID. Like PFD and P&ID, Reliability Flow Diagram provide valuable and useful information for the design and management of chemical process.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2B
• /
• pp.121-129
• /
• 2009

In this study, dam-break flows are simulated numerically by using an efficient and accurate Cartesian cut-cell mesh system. In the system, most of the computational domain is discretized by the Cartesian mesh, while peculiar grids are done by a cutcell mesh system. The governing equations are then solved by the finite volume method. An HLLC approximate Riemann solver and TVD-WAF method are employed to calculation of advection flux of the shallow-water equations. To validate the numerical model, the model is applied to some problems such as a steady flow convergence on an ideal bed, a steady flow over an irregular bathymetry, and a rectangular tank problem. The present model is finally applied to a simulation of dam-break flow on an experimental channel. The predicted water surface elevations are compared with available laboratory measurements. A very reasonable agreement is observed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.145-145
• /
• 2012

일반적으로 식생하도에서는 다양한 흐름저항 발생으로 인해 통수능은 감소하고 홍수위는 증가할 수 있다. 식생하도 흐름해석을 위해서는 복합적으로 발생하는 흐름저항이 합리적으로 산정되어야 한다. 하도 흐름에 식생을 고려하는 중요한 관점 중 하나는 식생높이에 대한 수심의 비이다. 본 연구에서는 수심이 식생높이보다 큰 즉, 침수식생 조건에서 식생층의 평균유속 산정식을 제시하고자 하였다. 문헌조사 결과 식생층의 평균유속 산정 방법은 크게 두 가지로 구분되었다. 첫 번째는 흐름을 정상, 등류로 가정하고 전 수심에 대한 힘의 평형을 해석하는 것이고(Stone and Shen, 2002), 두 번째는 2층 구조로 분리하여 식생층과 표면층사이에서 발생하는 전단력을 힘의 평형에 포함시키는 것이다(Baptist et al., 2007; Huthoff et al., 2007; Yang and Choi, 2010). Stone and Shen(2002)의 경우 일부 유속을 과대 산정하는 결과를 보였고, 이는 층간 전단력이 무시되었기 때문이다. 따라서 본 연구에서도 2층 구조론을 이용하였다. 그러나 식생의 밀도가 증가하게 되는 경우 식생이 차지하는 부피는 증가하는 반면, 바닥 전단력의 영향은 감소하게 되므로 식생의 부피는 고려하되 바닥 전단력은 무시하였다. 본 연구를 통해 제시한 식생층 평균유속식을 기존 연구의 수리모형실험 결과와 비교한 것은 <그림 1>과 같다. 비교적 일치하는 결과를 보였지만 Dunn et al.(1996), Rowinski et al.(2002)의 실험결과에 대해서는 유속을 과대 산정하는 것으로 나타났다. 이 들 실험조건의 특징은 침수비가 모두 2.0보다 작다는 것이다. 따라서 침수비 조건에 따라 전단력 ${\tau}_i$의 영향이 있는 것으로 판단된다. 본 연구에서는 침수비 2.0을 기준으로 이보다 낮은 침수비에서는 전단력 ${\tau}_i$를 무시하고, 2.0이상에서는 ${\tau}_i$를 고려한 침수식생하도 식생층 평균유속 산정식을 제시하였고 수리실험결과와 비교한 결과 <그림 2>와 같이 수용할 만한 결과를 얻었다.

• Geotechnical Engineering
• /
• v.10 no.2
• /
• pp.41-56
• /
• 1994

Under the groundwater level, the tunnel face is affected by the seepage force and the groundwater flow may cause a trouble to the tunnel support systems. The appropriate methods of analysis and design in the tunnel face and the lining, considering groundwater flow according to tunnel drainage condition are presented in this thesis. First, the effect of seepage on the stability of tunnel face was studied. Seepage force was estimated by the 3-D finite element analysis and the stability of tunnel face was checked by analytical method. Furthermore, using the finite difference method the stress and displacement on the face were computed for either case, where the seepage force is or is not considered, and the effect of seepage on the tunnel face stability was evaluated. Second, the effect of seepage force on the tunnel lining when construction is finished and steady state seepage flow occurs was studied and a design methodology considering seepage effect was made. Consequently, in case where the groundwater level remains almost unchanged and the steady state groundwater flow occurs, the proper countermeasures for face staility are required according to the condition of groundwater flow. Moreover, the tunnel lining should be designed and constructed considering the seepage force occuring by the groundwater flow toward the tunnel linings.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.2
• /
• pp.191-199
• /
• 1993

Diffusion of a steady horizontal line source in a turbulent shear flow is simulated by numerically solving a steady two-dimensional advective diffusion equation. The computational result is compared with the analytic solution for uniform velocity and diffusivity distributions over the depth. The analytic solution for constant velocity and diffusivity overestimates the degree of vertical mixing. The normalized equation indicates that friction factor is the only physical parameter that governs the vertical diffusion process. Sensitivities of the diffusion process to the friction factor and initial source position are analyzed. The rate of vertical mixing varies approximately as the square root of the friction factor. The optimal source position, which gives the most rapid mixing, lies above the mid-depth and moves toward the water surface as the friction factor increases.