• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04a
• /
• pp.553-555
• /
• 2001

블라인드 등화기법은 별도의 훈련신호없이 효율적인 데이터 전송을 위한 등화기 탭 수정을 수행하는 방법이다. 본 논문에서는 이중 모드를 갖는 SCS-MMA 방법을 제안한다. 기존의 CMA와 MMA 기법들은 자승평균 오차함수(mean squared error function)를 기반으로 하는 포물선을 이루지 않는 비용함수를 사용하므로, 부적절한 국부 최소값으로 수렴할 수 있다. 제안하는 방법은 정규화된 MMA 등화 방법을 기반으로 수렴 속도의 개선과 요구되지 않은 국부 최소값으로의 수렴진행을 방지위해 SCS(soft constraint satisfaction) 알고리듬을 구현하였다. 또한, 입력 신호에 신뢰도를 주어 결정지향 알고리듬으로 자동 전환하는 방법을 적용한다. 이를 통해, 보다 빠른 수렴과 정상상태에서 결정지향 알고리듬에서와 같은 평균 오차값을 보장할 수 있다. 실험 결과 제안된 알고리듬이 기존의 방법들보다 수렴속도와 안정성에 있어 우수한 성능을 갖음을 볼 수 있다.

• Journal of Korea Water Resources Association
• /
• v.38 no.6 s.155
• /
• pp.505-515
• /
• 2005

Two representative river water quality models have been compared in this paper. The steady water quality model, QUAL2E, and the unsteady model, CE-QUAL-RIV1, have been chosen for comparative simulations. Under same reaction coefficients and boundary conditions, the water quality of the Geum river below the Daechung dam has been simulated using two different models, and the water quality equations are compared each other. Since basic model algorithm is very close, the input data required for model run is very similar. Upon the simulation under steady condition, the results of two models show very good agreement especially for BOD, DO, and $NH_3-N$, while the results of specific constituent such as dissolved P is quite different. As a result, dominant water quality parameters to compute each corresponding water quality variables are summarized and tablized through the sensitivity analysis.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.1
• /
• pp.54-62
• /
• 2000

본 논문은 Vernier 모드에서 운전하는 2-모듈 TCSC로 구성된 전력송전시스템의 특성 해석을 위하여 싸이리스터 점호각 계산을 푸리에 공간에서 수행한다. 이를 위하여 싸이리스터 스위칭 함수를 이용하여 TCSC 리액터 전류에 관한 연립방정식을 구하였다. TCSC 모듈의 등가 임피던스가 전력송전 시스템이 요구하는 특정값을 갖게 하는 싸이리스터 점호각을 수치해석 방법을 사용하여 구하고, TCSC 전력송전시스템의 정상상태 특성을 해석하였다. 또한 EMTP 시뮬레이션을 수행하여 푸리에 공간에서의 점호각 계산의 타당성을 시평면상에서 검증하였다.

• Journal of the Korean Society of Safety
• /
• v.12 no.4
• /
• pp.214-219
• /
• 1997

The mechanical seals, which are installed in rotating machines like pump and compressor, are generally used as sealing devices in the many fields of industries. The failure of mechanical seals such as leakage, crack, breakage, fast and severe wear, excessive torque, and squeaking results in big problems. To identify abnormal phenomena on mechanical seals and to propose the proper monitoring parameter for the failure of mechanical seals, sliding wear experiments were conducted. Acoustic emission, torque, and temperature were measured during experiments. Optical microstructure was observed for the wear processing after every 10 minute sliding at rotation speed of 1750 rpm and scanning electron microscopy was also observed. Except for the initial part of every experiment, the variation of acoustic emission was well coincided with torque variation during the experiments. This study concludes that acoustic emission and torque are proper monitoring parameters for the failure of mechanical seals. The intensity of acoustic emission signals is measured in root mean square voltage. Temperature of sealing face will be used as a parallel parameter for increasing the reliability of monitoring system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.581-581
• /
• 2012

경사면의 잠김과 드러남(wetting and drying)에 대한 천수방정식의 수치 실험으로서 그 전선 근처에서 수심이 매우 작은 경우, 수심이 작을 때 2차 정확도를 위한 MUSCL의 적용 여부, 그리고 마찰 적용의 한계 수심 등에 대해 수심경사법(DGM)과 수면경사법(SGM)을 비교 검토하였다. 먼저, 포물선형 융기에서 정상상태의 기준해와 비교하고 하류에서 배수(drain)가 되는 경우를 상정하였다. 그리고 삼각형 바닥 턱을 지나는 댐 붕괴 흐름에 대한 실험의 결과와 비교하였다. 마지막으로 유사난수 발생에 의한 불규칙 바닥 구간을 지나는 가상 댐 붕괴 흐름에 대해 모의하였다. 정상 상태의 잠긴 바닥(wet bed)에 대해 정수 상태에서 SGM의 선평형성(well-balancedness)이 만족되었으나, 흐름이 상류와 사류일 때 각각 DGM과 SGM에서 유량 변동이 있음을 확인하였다. 드러난 바닥(dry bed)으로 흐름이 진행될 때 수심이 음의 값이 되지 않도록 잠김 드러남 전선근처에서 수심이 매우 작아지는 경우($<1{\times}10^{-6}m{\sim}1{\times}10^{-5}m$) 수심을 0으로 강제하고, n이 0.011과 0.04인 경우 수심이 각각 $1{\times}10^{-4}m$와 $1{\times}10^{-2}m$보다 작은 경우 마찰의 적용을 배제하는 것이 불가피하였다. SGM에 의한 MUSCL에서 수심이 $5{\times}10^{-5}m{\sim}5{\times}10^{-2}m$보다 작을 때 1차 정확도로 회귀가 불가피하였으나, DGM에서는 그와 같은 정확도의 훼손이 나타나지 않았다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.5
• /
• pp.100-109
• /
• 2003

A performacne simulation model of the PT6A-62 turboprop engine using the $SIMULINK^R$ was proposed to predict transient and steady state behaviors. The $SIMULINK^R$ has several advantages such as user-friendliness due to the GUI(Graphic User Interfaces) and ease in the modification of the computer program. The $SIMULINK^R$ model consists of subsystems to represent engine gas path components such as flight initial subsystem, compressor subsystem, burner subsystem, compressor turbine subsystem, power turbine, exhaust nozzle subsystem and integrator subsystem. In addition to subsystems, there are search subsystems to find an appropriate operating point by scaling from the 2-D components look-up table, Gasprop Subsystem to calculate the gas property precisely. In case of steady state validation, performance results analyzed by the proposed $SIMULINK^R$ model were agreed well with the analysis results by the commercial GASTURB program. Moreover in validation of the transient model, it was found that performance simulation results by the proposed model were reasonable agreement with analysis results by the well-proved computer program using FORTRAN.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.405-412
• /
• 2013

This paper reports the steady-state stresses within the heat affected zone (HAZ) of a welded straight pipe subject to creep. The creep constants and exponent are varied systematically to see the effect of various mismatches in creep properties on the steady-state creep stresses, via detailed two-dimensional finite element (FE) creep analyses. The weldments consist of the base metal and weld metal with the HAZ, which are characterized using the idealized power creep laws with the same creep exponent. The internal pressure and axial loading are considered to see the effect of the loading mode. To quantify the creep stresses, a creep mismatch factor is introduced as a function of the creep constants and exponent. It is concluded that the ratio of the section-averaged stresses for a mismatched case to those for an evenmatched case are linearly dependent on the mismatch factor. The results are compared with the FE results, including the Type IV region, as well as the R5 procedure.

• Korean Chemical Engineering Research
• /
• v.58 no.3
• /
• pp.480-485
• /
• 2020

The extended Maxwell-Wagner polarization model is employed to describe the ER behavior of the conducting particle ER suspensions, and solutions to the equation of motion are obtained by dynamic simulation. The simulation results show the nonlinear ER behavior (Δτ∝Eⁿ, n≈1.5) of the conducting particle ER suspensions. The response point, where shear stress reaches steady-state, is the point where stable break-up and rebuild of the chain-like structure of particles reaches. Also, it shows the minimum of shear stress, which corresponds the start-up of random particle configuration. The shear stress reaches plateau as particle volume fraction increases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2310-2316
• /
• 1997

This paper presents a comparative performance analysis of the stochastic gradient adaptive algorithm based on the least mean absolute third (LMAT) error criterion with other widely-used competing adaptive algorithms. Under the assumption that the signals involved are zero-mean, wide-sense stationary and Gaussian, approximate expressions that characterize the steady-state mean-squared estimation error of the algorithm is dervied. The validity of our derivation is then confirement by computer simulations. The convergence speed is compared under the condition that the LMAT and other competing algorithms converge to the same value for the mean-squared estimation error in the stead-state, and superior convergence property of the LMAT algorithm is observed. In particular, it is shown that the LMAT algorithm converges faster than other algorithms even through the eignevalue spread ratio of the input signal and measurement noise power change.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.8
• /
• pp.113-122
• /
• 1999

A new resonant switching Watkins-Johnson converter was proposed, which minimizes the switching loss and is well suited for high-frequency operation. The steady-state analyses revealed that the voltage gain of the proposed converter is solely determined by the switching frequency. Consequently, to regulate the output voltage of the converter for variable load current the switching frequency should be varied accordingly. Based on the results of analyses, an optimum design procedure for the resonant component values is proposed, which minimized the voltage stress of power switch while maintaining the desired property of zero-voltage switching. Finally, accuracy of analyses and validity of an optimum design procedure are verified on an experimental resonant switching Watkins-Johnson converter prototype.