• Journal of Korea Water Resources Association
• /
• v.56 no.2
• /
• pp.103-113
• /
• 2023

The river confluence is a section in which two rivers with different topographical and hyrodynamic characteristics are combined into one, and it is a section in which rapid flow, inflow of sediments, and hydrological topographic changes occur. In the confluence section, the flow of fluid occurs due to the difference in density due to the type of material or temperature difference, which is called a density flow. It is necessary to accurately measure and observe the confluence section including a certain section of the main stream and tributaries in order to understand the mixing behavior of the water body caused by the density difference. A comprehensive analysis of this water mixture can be obtained by obtaining flow field and flow rate information, but there is a limit to understanding the mixing of water bodies with different physical properties and water quality characteristics of rivers flowing with stratigraphic flow. Therefore, this study attempts to grasp the density flow through the water temperature distribution in the confluence section. Among the extensive data of the river, vertical data and water surface data were acquired, and through this, the stratification phenomenon of the confluence was to be confirmed. It was intended to analyze the mixed pattern of the confluence by analyzing the water mixing pattern according to the water temperature difference using the vertical data obtained by measuring the repair volume by installing the ADCP on the side of the boat and measuring the real-time concentration using YSI. This study can supplement the analysis results of the existing water quality measurement in two dimensions. Based on the comparative analysis, it will be used to investigate the current status of stratified sections in the water layer and identify the mixing characteristics of the downstream section of the river.

• Journal of the Daesoon Academy of Sciences
• /
• v.27
• /
• pp.201-243
• /
• 2016

This paper analyzes the research trends from 358 scholarly articles published in the Journal of Daesoon Academy of Sciences from the first published journal in 1996 to the most recent journal published on the 25^th of 2015 and proposes ideas for improvement. First of all, "The Journal of Daesoon Academy of Sciences" does not meet the standards required by the National Research Foundation, falling short of the most important conditions for the registration such as the periodicity and punctuality expected from academic journals. Furthermore, in terms of the Bibliometrical analysis, the number of articles published by the journal is decreasing and the consistency, with regards to rules and principles regulating publication details and bibliography formats, is nonexistent. Although various authors seemed to be meeting these criteria on the surface, the ratio of co-authored articles is too small. Securing researchers specializing in Daesoon Thought for expanding the size of the journal is important, but it is also important to diversify the research topics through exchanging ideas among researchers from various organizations. Here are some ideas for the improvement of the Journal of Daesoon Academy of Sciences: First, in order to meet the standards for punctuality and periodicity, it would be best to publish the journal twice a year with 12 to 15 articles. Second, the journal must become searchable through the creation of a database. Third, the key words and abstracts of articles must be written in Korean and English to facilitate the sharing of articles among researchers. Fourth, the journal must have a diverse and outstanding editorial board which takes into account the geographical situations of its board members. Fifth, the Journal must include articles on relevant topics that reflect the core topics of the Daesoon Thought and other studies. Sixth, articles must have a front page that contains bibliographical items to convey information to the reader. Seventh, it is essential that the journal have a clear publication date detailing the year, month, and day as well as a standard numbering scheme (i.e, Vol. and no).

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.491-501
• /
• 2022

Bentonite has been proposed as a buffer and backfill material for high-level radioactive waste repository. Under such repository environment conditions, bentonite is subjected to combined thermal, hydrological, mechanical, and chemical processes. This study evaluates the feasibility of applying X-ray CT technology on the characterization of bentonite under hydration conditions using a newly developed testing cell. The cylindrical cell is made of platic material, with a removable cap to place the sample, enabling to apply vertical pressure on the sample and to measure swelling pressure. The hydration test was carried out with a sample made of Gyeonju bentonite, with a dry density of 1.4 g/cm³, and a water content of 20%. The sample had a diameter of 27.5 mm and a height of 34 mm. During the test, water was injected at a constant pressure of 0.207 MPa, and lasted for 7 days. After one day of hydration, bentonite swelled and filled out the space inside the cell. Moreover, CT histograms showed how the hydration process induced an initial increase and later progressive decrease on the density of the sample. Detailed profiles of the mean CT value, CT standard deviation, and CT gradient provided more details on the hydration process of the sample and showed how the bottom and top regions exhibited a decrease on density while the middle region showed an increase, especially during the first two days of hydration. Later, the differences in CT values with respect to the initial state decreased, and were small at the end of testing. The formation and later reduction of cracks was also characterized through CT scanning.

• Korean Journal of Environmental Biology
• /
• v.40 no.2
• /
• pp.224-238
• /
• 2022

North Korea has actively participated in the international community related to environmental agreements. It has proposed various environmental policies internally since the Kim Jong-un regime. In particular, it emphasizes activities related to climate change response, the Sustainable Development Goals, and the conservation of ecosystems including forests and wetlands. In this study, a new security cooperation plan was proposed with an understanding of the climate crisis and environmental regime as a starting point. To this end, trends and recent activities for climate-environment cooperation in the international community and on the Korean Peninsula were analyzed. In addition, North Korea's conditions for cooperation on the Korean Peninsula, technology demand, and the projected future environment of the Korean Peninsula were dealt with. Ultimately, through advice of experts, we were able to discover cooperation agendas by sector and propose short-term and long-term environmental cooperation strategies for the Korean Peninsula based on them. In this study, conditions and directions for cooperation in fields of climate technology, biological resources, air/weather, water environment, biodiversity, renewable energy, bioenergy, and so on were considered comprehensively. Among 21 cooperation agendas discovered in this study, energy showed the largest number of areas. Renewable energy, forest resources, and environmental and meteorological information stood out as agendas that could be cooperated in the short term. As representative initiatives, joint promotion of 'renewable energy' that could contribute to North Korea's energy demand and carbon neutrality and 'forest cooperation' that could be recognized as a source of disaster reduction and greenhouse gas sinks were suggested.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.557-564
• /
• 2009

In recent years, there have been numerous explosion-related accidents due to military and terrorist activities. Such incidents caused not only damages to structures but also human casualties, especially in urban areas. To protect structures and save human lives against explosion accidents, better understanding of the explosion effect on structures is needed. In an explosion, the blast overpressure is applied to concrete structures as an impulsive load of extremely short duration with very high pressure and heat. Generally, concrete is known to have a relatively high blast resistance compared to other construction materials. However, information and test results related to the blast experiment of internal and external have been limited due to military and national security reasons. Therefore, in this paper, to evaluate blast effect on reinforced have concrete structure and its protective performance, blast tests are carried out with $1.0m{\times}1.0m{\times}150mm$ reinforce concrete slab structure at the Agency for Defence Development. The standoff blast distance is 1.5 m and the preliminary tests consists with TNT 9 lbs and TNT 35 lbs and the main tests used ANFO 35 lbs. It is the first ever blast experiment for nonmilitary purposes domestically. In this paper, based on the basic experiment procedure and measurement details for acquiring structural behavior data, the blast experimental measurement system and procedure are established details. The procedure of blast experiments are based on the established measurement system which consists of sensor, signal conditioner, DAQ system, software. It can be used as basic research references for related research areas, which include protective design and effective behavior measurements of structure under blast loading.

• Korean Journal of Breeding Science
• /
• v.51 no.4
• /
• pp.386-394
• /
• 2019

Rehmannia glutinosa, one of the major medicinal crops in Korea, can be classified into three types: fresh, dried and prepared Rehmannia root. In this study, the quality characteristics of prepared rehmannia root were evaluated using four different cultivars that are commonly used in the market. In making prepared rehmannia root, roots of Jihwang 1, Kokang, Togang, and Dagang were dried, soaked in rice wine, and steamed nine times. At each stage, physiochemical properties were analyzed, including yield, which is one of the most important industrial factors to consider. The yield was the highest in Togang at 23.61% and the lowest in Dagang at 21.16%. These yield values showed a highly negative correlation with the moisture content of roots. The fructose and glucose contents were increased during the 3^rd, 4^th and 5^th steaming but then decreased. The sucrose, raffinose, and stachyose content gradually decreased during the first three steaming and were not detected during the 4^th steaming. Additionally, the catalpol content was not detected after the 4^th steaming. On the contrary, the 5-hydroxymethylfurfural content was not detected in the raw root but increased during the steaming. Jihwang1 and Togang exceeded the 0.1% Korean Pharmacopoeia standard after the 5^th steaming, reaching it faster than did the other cultivars. Overall, Togang was the optimal cultivar considering the overall characteristics of its high yield and short steaming time. These results could provide useful information for the industrial use of prepared Rehmannia root based on the requirements and characteristics of each cultivar.

• (The) Research of the performance art and culture
• /
• no.22
• /
• pp.223-252
• /
• 2011

If we remember that modern world history has built systems of meaning through the concepts "difference," "different," and "other-ness" and has constructed new identity based on opposing hierarchy, music anthropology which tried to build "difference" between the west and the non-west was thoroughly west -centered, in the sense that it has perceived the heterogeneous symbolic systems among nations, as well as the barrier between the two cultures. On the other hand, world music, which has emerged as the most attractive field in culture industry and concert-art-market by crossing over global capitals, markets, and barriers, can be considered the most post-modernist and glocal. However, it is interesting to note that world music, which has been described as post-modern and glocal, has "difference" and "different" in its basis, just like the precepts for modern music anthropology (Meintjes 1990; Guilbault 1993; Taylor 1997; Frith 2000; Feld 1988). Furthermore, one can understand that the "different" and "difference," generally termed as being "non-western," are fundamentally based on ethnic or national imagination. In this sense it is interesting and important to examine such ethnic imagination in the "non-western ethnic musics" in music anthropology and in world music. Notwithstanding the attention paid and research made by music anthropologists, they have failed to elevate the "non-western ethnic musics" to become universally communicative, and these ethnic musics were reborn as "global" and "world music," through the process of "acculturation," "derivation," and "hybridization," with the west as major site for production and consumption. Meanwhile, the audience for world music, which did not exist before the birth of world music as a term, was now born as world music emerged. They are global populace who consume the musical "difference" and "imagined ethnicity," who through their consumption are constructing new social meanings including ethnicity, race, nation, and class identity. This study, by examining current discourse, performance, and process for the world music through media and field studies and scholarly debates, attempts to understand the production and consumption of "imagined ethnicity." This will also shed light on how "ethnicity" is created and consumed, and how this is involved in the process of world music.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.6
• /
• pp.109-120
• /
• 2023

The High-Frequency Radar (HFR) is an equipment designed to measure real-time surface ocean currents in broad maritime areas.It emits radio waves at a specific frequency (HF) towards the sea surface and analyzes the backscattered waves to measure surface current vectors (Crombie, 1955; Barrick, 1972).The Seasonde HF Radar from Codar, utilized in this study, determines the speed and location of radial currents by analyzing the Bragg peak intensity of transmitted and received waves from an omnidirectional antenna and employing the Multiple Signal Classification (MUSIC) algorithm. The generated currents are initially considered ideal patterns without taking into account the characteristics of the observed electromagnetic wave propagation environment. To correct this, Antenna Pattern Measurement (APM) is performed, measuring the strength of signals at various positions received by the antenna and calculating the corrected measured vector to radial currents.The APM principle involves modifying the position and phase information of the currents based on the measured signal strength at each location. Typically, experiments are conducted by installing an antenna on a ship (Kim et al., 2022). However, using a ship introduces various environmental constraints, such as weather conditions and maritime situations. To reduce dependence on maritime conditions and enhance economic efficiency, this study explores the possibility of using unmanned aerial vehicles (drones) for APM. The research conducted APM experiments using a high-frequency radar installed at Dangsa Lighthouse in Dangsa-ri, Wando County, Jeollanam-do. The study compared and analyzed the results of APM experiments using ships and drones, utilizing the calculated radial currents and surface current fields obtained from each experiment.

• Economic and Environmental Geology
• /
• v.57 no.2
• /
• pp.161-175
• /
• 2024

Aggregate typically refers to sand and gravel formed by the transportation of rocks in rivers or artificially crushed, constituting a core resource in the construction industry. Gyeongsangbuk-do, the largest administrative area in South Korea, produces various sources of gravel, including forest, land (excluding other sources), river, and crushed stone. As of 2022, it has extracted approximately 6.96 million cubic meters of aggregate, with permitted production totaling around 4.07 million cubic meters and reported production of about 2.88 million cubic meters. The aggregate demand in Gyeongsangbuk-do is estimated to be 12.39 million cubic meters according to the estimation method in Ready-Mix Concrete. From the supply perspective, about 120 extraction sites are operational, with most municipalities maintaining an appropriate balance between aggregate demand and supply. However, in some areas, there is inbound and outbound transportation of aggregate to neighboring regions. Regions with significant inbound and outbound aggregate transportation in Gyeongsangbuk-do are areas connected to Daegu Metropolitan City and Pohang City along the Gyeongbu rail line, showing a high correlation with population distribution. Gyeongsangbuk-do faces challenges such as population decline, aging rural areas, and insufficient balanced regional development. Analysis using GIS reveals these trends in gravel demand and supply. Currently in this study, Gyeongsangbuk-do meets its demand for aggregate through the supply of various aggregate sources, maintaining stable aggregate procurement. River and terrestrial aggregates may be sustained as short-term supply strategies due to the difficulty of longterm development. Considering the reliance on raw material supply for selective crushing, it suggests the need for raw material management to maintain stability. Gyeongsangbuk-do highlights quarries in the forest as an important resource for sustainable aggregate supply, advocating for the development of large-scale aggregate quarries as a long-term alternative. These research findings are expected to provide valuable insights for formulating strategies for sustainable management and stable utilization of aggregate resources.

• Health Policy and Management
• /
• v.34 no.2
• /
• pp.178-184
• /
• 2024

Background: This study aimed to determine the effectiveness of drug utilization review (DUR) evaluation indicators on safe drug use by comparing the changes in DUR inspection rates and drug duplication prescription prevention rates between the pre- and post-implementation of the DUR evaluation indicators of the Healthcare Quality Evaluation Grant Initiative. Methods: This study used DUR data from the Health Insurance Review and Assessment Service in 2018 (pre-implementation) and the evaluation results of the Healthcare Quality Evaluation Grant Initiative in 2023 (post-implementation). The dependent variables were the DUR evaluation indicators, including DUR inspection rate and drug duplicate prescription prevention rate. The independent variable was the implementation of the DUR evaluation indicators, and the control variables included medical institution characteristics such as type, establishment classification, location, DUR billing software company, and number of beds. Results: The results of the analysis of the difference in the prevention rate of drug duplicate prescriptions between the pre- and post-implementation of the DUR evaluation indicators of the Healthcare Quality Evaluation Grant Initiative showed that the prevention rate of drug duplicate prescriptions increased statistically significantly after the implementation of the DUR evaluation indicators. Conclusion: The policy implications of this study are as follows: First, ongoing evaluation of DUR systems is needed. Second, it is necessary to establish a collaborative partnership between healthcare organizations that utilize DUR system information and the organizations that manage it.