• 비파괴검사학회지
• /
• 제25권4호
• /
• pp.254-261
• /
• 2005

지금까지 한국인의 치아 통계는 매우 부족한 상태이고, 대부분 치아형태의 정보를 얻기 위해 방사선학적 방법을 이용하거나, 치아를 절단하는 등의 방법으로 연구를 해왔다. 이와 같은 방법은 오랜 시험 기간을 필요로 하고 정밀도가 낮고 파괴적인 방법을 주로 이용한 것이므로, 이제는 한국인의 표준 치아에 대한 정밀한 데이터를 얻기 위해 새로운 비파괴적인 시험이 필요하다. 이를 위하여 각각의 하악 제1소구치를 미세단층촬영기(Micro-CT, SkyScan, Belgium)를 이용하여 $21.31{\mu}m$의 해상도로 교합면에 대한 수평면으로 0.022mm 로 Scan을 하였다. 이를 통하여 내 외부 형태학적 중요부위를 측정하였으며, 영구 치아의 평균 치수표로 사용했었던 G. V. Black(1836-1915)에 의해 제시된 수치와 비교하였다.

• 한국정밀공학회지
• /
• 제21권1호
• /
• pp.140-148
• /
• 2004

A novel rapid prototyping (RP) process, a full-automated transfer type variable lamination manufacturing process (Full-automated VLM-ST) has been developed. In the full-automated VLM-ST process, a vacuum chuck and a rectilinear motion system transfer the EPS foam material in the form of the plate with two pilot holes to the rotary supporting stage. The supplied material is then cut into an automated unit shape layer (AUSL) with a desired width, a desired length, a desired slope on the side surface, and a pair of reference shapes, which is called the guide shape (GS)’, including two pilot holes in accordance with CAD data through cutting in two steps using a four-axis synchronized hotwire cutter. Then, each AUSL is stacked by setting each AUSL with two pilot holes in the building plate with two pilot pins, and subsequently, adhesive is applied onto the top surface of the stacked AUSL by a bonding roller and pressure is simultaneously given to the bottom surface of the stacked AUSL. Finally, three-dimensional shapes are rapidly and automatically fabricated. This paper describes the method to generate guide shapes in AUSL data for the full-automated VLM-ST process. In order to examine the applicability of the method to generate guide shapes, three-dimensional shapes, such as a piston shape and a human head shape, are fabricated from the full-automated VLM-ST apparatus.

• 한국정밀공학회지
• /
• 제21권4호
• /
• pp.109-119
• /
• 2004

Rapid prototyping (RP) technologies have been widely used to reduce the lead-time and development cost of new products. $VLM-_{ST}$ process has been developed to overcome the currently developed RP technologies such as a large building time, a high building cost, an additional post-processing and a large apparatus cost. $VLM-_{ST}$ process requires an additional human interaction due to the manual stacking and bonding. Hence, building time, building cost and the part quality are dependent on the skill of labor. A novel RP process, fully automated $VLM-_{ST}$ process ($VLM-_{ST}$), has been developed to improve building efficiency of the process and the human dependency of the part. The objective of this work is to propose a $VLM-_{ST}$ process and to develop an apparatus for implementation of the process. $VLM-_{ST}$ process and its apparatus have various technical novelties such as two step cutting using a rotating table, an automatic stacking method using two pilot holes and two reference shapes, a concept of automatic unit shape layer (AUSL), and an automatic bonding using the bonding roller and building magazine. In order to examine the efficiency and the applicability of the proposed process, various three-dimensional shapes, such as a piston, a human head shape and a human bust shape, were fabricated on the apparatus.

• 한국정밀공학회지
• /
• 제28권6호
• /
• pp.651-656
• /
• 2011

Although prosthetic training was received, most of amputees mainly depend on visual feedback to use prostheses, not on cutaneous and proprioceptive sensibility. Our objective of this study was to determine if there are changes in the somatosensory sensibility of amputees compared to non-amputees using multi-channel vibration stimulation system. One transradial amputees and ten non-amputees were involved. To investigate changes of residual somatosensory sensibility at stump, we set up custom-made vibration stimulation system including eight actuators (4 medial and 4 lateral) and GUI-based acquisition system. The results showed that there was similar pattern of subjective response at most of channels among group as stimulation increases. However, amputees' subjective response at channel 8 for 238Hz vibration was more sensitive than that of healthy persons. With respect to channels, response at channel 4 (medial) corresponding region to flexor carpi ulnaris for transradial amputees was most sensitive than other channels. In addition, sensitivity of four medial channels was on average about 0.5 scale than that of four lateral channels. Somatosensory sensibility was amputee, women, and men in sensibility order.

• 한국정밀공학회지
• /
• 제30권7호
• /
• pp.769-776
• /
• 2013

The dynamic compliance characteristics of a prosthetic foot midgait are very important for natural performance in an amputee's gait and should be in a range that provides natural, stable walking. In this study, finite element analysis (FEA) and classical laminate theory were used to examine the mechanical characteristics of a carbon-epoxy composite laminate prosthetic foot as a function of variation in the lamination composition. From this analysis, an FEM model of a prosthetic keel, made from the composite material, was developed. The lamination composition of the keel was designed for improved stiffness. The prototype product was fabricated using an autoclave. Vertical loading response tests were performed to verify the simulation model. The results of the experiments were similar to those from simulations below the loading level of the gait, suggesting use of the proposed simulation model for prosthetic keel design.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.748-753
• /
• 2005

Among processes to manufacture parts from footwear materials like upper leathers, one of the most essential processes is the cutting one optimally arranging lots of parts on raw footwear materials and cutting. A new nesting strategy was proposed for the 2-dimensional part layout by using a two-stage approach, where which can be effectively used for water jet cutting. In the initial layout stage, a SOAL(Self-Organization Assisted Layout) based on the combination of FCM(Fuzzy C-Means) and SOM was adopted. In the layout improvement stage, SA(Simulated Annealing) based approach was adopted for a finer layout. The proposed approach saves much CPU time through a two-stage approach scheme, while other annealing-based algorithm so far reported fur a nesting problem are computationally expensive. The proposed nesting approach uses the stochastic process, and has a much higher possibility to obtain a global solution than the deterministic searching technique. We developed the automatic nesting software of NST(ver.1.1) software for footwear industry by implementing of these proposed algorithms. The NST software was applied by the optimized automatic arrangement algorithm to cut without the loss of leathers. if possible, after detecting damage areas. Also, NST software can consider about several features in not only natural loathers but artificial ones. Lastly, the NST software can reduce a required time to implement generation of NC code. cutting time, and waste of raw materials because the NST software automatically performs parts arrangement, cutting paths generation and finally NC code generation, which are needed much effect and time to generate them manually.

• Design & Manufacturing
• /
• 제10권3호
• /
• pp.1-7
• /
• 2016

In the semiconductor industry the memory and chip were developed to high density memory and high performance chip, so circuit design was also high integrated and the test bed was needed to be thin and fine pitch socket. LGA(Land Grid Array) IC socket with thin wall thickness was designed to satisfy this requirement. The LGA IC socket plastic part was manufacture by injection molding process, it was needed accuracy, stiffness and suit resin with high flowability. After injection molding process the side gates were needed to remove for further assembly process. ln this study, the cold press cutting process was applied to remove the gates. For design of punch and die, the cold press cutting analysis was implemented by$DEFORM-2D^{TM}$ ln consideration of the simulation results, an adequate punch and die was designed and made for the cutting unit. In order to verify the performance of cutting process, the roughness of cutting section of the part was measured and was satisfied in requirement.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.924-925
• /
• 2013

최근 미세가공 및 자동측정 분야가 고성능화 되어 자동화가 많이 실현되고 있다. 이러한 자동화는 고정밀도와 동시에 제품 생산에 대한 저비용, 단기납기, 고품질의 제품 창출로 이어진다. 현재 핸드폰 시장이 급성장함에 따라 핸드폰의 생산 주기가 현저하게 짧아지고 핸드폰 조립공정에 있어서 다양한 크기에 대한 핸드폰 평판표시장치인 LCD(Liquid Crystal Display)가 존재하고 있다. 핸드폰 조립공정에 있어서 이러한 다양한 LCD 표시장치(LCD, PDP, FED등)를 보호하기 위하여 보호매체인 PE/PET 필름을 부착하여 납품하도록 하고 있으며, 핸드폰 조립공정에서 발생할 수 있는 흠집 등 기타 불량을 줄이도록 노력하고 있다. 그러나 이러한 보호필름은 현재 핸드폰 조립공정 후판부에서 평판표시장치의 유리기판의 크기에 맞게 보호필름을 절단하도록 공정이 구성되어 있다. 본 논문에서는 이러한 핸드폰 조립공정을 개선하고 자동화하기 위하여 경박단소용 평판표시장치의 얇은 유리기판에 접착된 PE/PET 필름을 핸드폰의 다양한 패턴에 맞추어 하단의 유리기판에는 결함이 없도록 하여 보호필름만을 커팅 할 수 있는 커팅시스템을 제안하고 정밀계측에 대한 실험 데이터를 제시하고자 한다.

• 실천공학교육논문지
• /
• 제14권2호
• /
• pp.327-332
• /
• 2022

본 실험은 효용성이 넓어지고 있는 바이오의약품 시장에서 질량분석기를 이용한 정밀 분석법을 제시한다. 단백질 의약품인 인성장호르몬(Somatotopin)을 분석하는 다양한 기술 중, 생화학적 시료 전처리를 통해 펩티드화 시킨 단백질을 LC-MS/MS 분석법으로 분석하였다. 분석과정은 액체크로마토그래피를 이용한 분리분석과 질량분석을 이용한 MS 및 MS/MS 분석으로 수행하였다. 인성장호르몬의 경우 21개의 트립틱 펩티드로 절단할 수 있는데, 본 실험을 통해 이들 중 13개의 펩티드가 평균 1 ppm 에러 이내로 이론적 예측치와 일치하였다.

• 한국가스학회지
• /
• 제20권4호
• /
• pp.33-43
• /
• 2016

미국과 유럽의 가스회사에서는 배관의 보수방법으로 그라인딩, 육성용접, 슬리브덮개용접, 복합재료보수, 핫태핑, 클램프 등 다양한 방법을 사용하고 있으며, 배관에 손상이 발생한 경우 사용적합성 평가를 거쳐 배관보수를 실시하고 있다. 또한, 미국과 영국 등에서는 매설된 도시가스배관이 타공사 또는 부식으로 인해 손상을 입은 경우 손상형태별로 적용 가능한 배관보수방법을 규정하고 있다. 국내의 경우에는 노후된 중압배관에 대하여 정밀안전진단을 하도록 하고 있으며, 정밀안전진단결과 발생된 결함의 종류 및 정도에 따라 배관을 보수, 교체 또는 신설하도록 규정하고 있다. 그러나 보수 및 보강 방법에 대하여는 기준이 마련되어 있지 않아 배관에 손상이 발생한 경우 주로 손상된 배관을 절단한 후 단관(短管)으로 교체하는 방법만을 사용하고 있다. 본 논문에서는 미국, 영국 등 국외의 보수방법 및 기준을 조사하고, 국내의 매설배관 검사 방법 등에 대해 조사하고, 보수방법 시험 결과를 분석한 후 국내 실정에 맞는 배관보수기준(안)을 제시하였다. 개발되는 기준에 따라 도시가스사업자가 정밀안전진단 결과의 후속조치로 배관보수를 하는 경우 가스공급을 중단하지 않아도 되므로 가스의 안정적 공급에 기여할 수 있을 것으로 판단된다.