• Korean Journal of Plant Resources
• /
• v.34 no.1
• /
• pp.52-58
• /
• 2021

Homogenization of quality was important in order to use herbal medicines as pharmaceuticals. To solve this problem, it was important to establish quality standards. Atractylodis Rhizoma Alba has no quantitative method in the Korean Pharmacopoeia. Thus, we have researched to improve the quality evaluation method of Atractylodis Rhizoma Alba with an HPLC. Atractylenolide III and atracylodin were selected as potential marker compounds. This analytical procedure was subject to validation. According to validation guideline of South Korea's Ministry of Food and Drugs Safety, the specificity, linearity, precision, range, quantitative limits, detection limits and accuracy were measured. Because the specificity, linearity, precision, range, quantitative limits, detection limits and accuracy meet criteria of the guideline, the analytic method was validated. With this analysis, Atractylodis Rhizoma Alba and Atractylodis Rhizoma analyzed. As a result, both atractylenolide III and atracylodin appear to be suitable standard compounds. it confirmed that tractylodes Rhizome, similar to Atractylodes Rhizome Alba, could be distinguished.

• Journal of Food Hygiene and Safety
• /
• v.36 no.4
• /
• pp.347-352
• /
• 2021

Yam (Dioscorea japonica) is widely utilized as food and a pharmaceutical ingredient as it contains a variety of valuable constituents. Allantoin is one of the bioactive components in yam that is used in pharmaceutical and cosmetic industry. This study was conducted to analyze and compare the allantoin content of yam flesh and peel by HPLC analytical method using an amino bonded-phase column to make up for the limitations of the previous HPLC analytical methods. The allantoin contents of yam flesh and peel were 3.09±0.025 and 3.91±0.11 mg/g (dry weight), respectively. The results of this study indicated that yam peel has higher allantoin content than yam flesh, and that the discarded yam peel could be used as a source for high value-added functional materials.

• Korean journal of applied entomology
• /
• v.61 no.4
• /
• pp.659-664
• /
• 2022

Putrescine generated by the action of microorganisms in the decay generally used as a measure of freshment in food. However, the analytical method of putrescine in freeze-dried royal jelly has not yet been established. In the present study, the UPLC method for putrescine in lyophilized royal jelly was established using C18 column. The newly established method was able to analyze putrescine accurately within 7 minutes and was validated by analytical parameters such as specificity, linearity, precision, accuracy, limit of detection, and limit of quantification. These results provide for the analytical method to evaluate the level of freshment in freeze-dried royal jelly, which will useful in further studies of safety verification.

• Analytical Science and Technology
• /
• v.21 no.2
• /
• pp.84-92
• /
• 2008

A method for the determination of trace amount of caffeine in urine and various drink samples using hollow fiber-liquid phase microextraction (HF-LPME) and capillary gas chromatograph/nitrogen phosphorus detector (GC/NPD) has been established. HF-LPME method has been optimized with respect to several experimental parameters including the effects of the hollow fiber length, extraction solvent, stirring mode, pH and salt concentration for the determination of caffeine from aqueous samples. The correlation coefficient of calibration curve for caffeine was 0.9994. The average recovery was 102%(n=3). The established method is feasible for the determination of trace amounts of caffeine in several aqueous sample. The limit of detection (LOD) and the limit of quantitation (LOQ) have been found to be 2.5 and 10 ng/mL, respectively. The established HF-LPME method for the analysis of caffeine from aqueous sample can be used for the determination of biological, food and environmental samples.

• Analytical Science and Technology
• /
• v.21 no.1
• /
• pp.53-57
• /
• 2008

In order to survey the contents of ethyl carbamate in alcoholic beverages, GC/MS-SIM method was used after extraction with dichloromethane in solid phase extract cartridge contained alcoholic beverages. In the applied GC/MS-SIM method, the values of recoveries and relative standard deviation were ranged from 85.2 % to 87.9 % and from 0.7 % to 1.9 %, the limit of detection and quantification were $2{\mu}g/kg$ and $10{\mu}g/kg$. Depending on alcoholic beverage kinds, the levels were variable and the average level was $194{\mu}g/kg$ for liquor, $105{\mu}g/kg$ for fruit wine, $62{\mu}g/kg$ distilled spirit, $28{\mu}g/kg$ for sake, $15{\mu}g/kg$ for yakju, $12{\mu}g/kg$ for other alcohol beverages, ND for soju, respectively.

• Journal of the Korean Chemical Society
• /
• v.42 no.1
• /
• pp.28-35
• /
• 1998

Microorganisms such as alga are able to uptake toxic and heavy metal ions. After Cd(Ⅱ) was preconcentrated on the carbon paste electrode constructed by incorporating alga (Anabaena), it was determined with differential pulse anodic stripping voltammetry. A well-defined oxidation peak of Cd(Ⅱ) was obtained at - 0.75 V vs. SCE. We investigated the optimum conditions using the peak, which are the effect of the amount of alga, pH, ionic strength, temperature, and preconcentration time on the preconcentration of Cd(Ⅱ) and that of the reduction time and potential on the reduction of Cd(Ⅱ) preconcentrated. Calibration curve for the determination of Cd(Ⅱ) was linear over the range of $1.0{\times}10^6\;M\;to\;8.0{\times}10^6$\;M (R=0.9978) and the detection limit was $5.0{\times}10^{-7}$\;M. The relative standard deviation was 3.1% (n=6) for $7.0{\times}10^{-6}\;M Cd(Ⅱ). In regeneration of the electrode surface with 0.1 M HCl, the response was reproducible continuously by 10 times.

• Analytical Science and Technology
• /
• v.28 no.2
• /
• pp.125-131
• /
• 2015

A method was developed and fully validated for the determination of terbutaline, a β₂-receptor agonist, in human plasma. Plasma samples were prepared by solid-phase extraction with Sep-Pak silica, followed by high-performance liquid chromatography (HPLC). The terbutaline was pre-separated from the interfering components in plasma on a Luna C18 (2) column, and terbutaline and salbutamol as an internal standard were resolved and determined on a Luna Silica column. The two columns were connected by a switching valve equipped with silica pre-column. The pre-column was used to concentrate the terbutaline in the eluent from the C18 column before back-flushing onto the silica column with fluorescence detection at an excitation/emission wavelength of 276/306 nm. The method was shown to be specific by testing six different human plasma sources. Linearity was established for a concentration range of 0.4-20.0 ng/mL with a correlation coefficient of 0.9999. The lower limit of quantitation was 0.4 ng/mL with a precision of 10.1% as C.V.%.

• Analytical Science and Technology
• /
• v.13 no.3
• /
• pp.304-308
• /
• 2000

The iodide was recovered from a simulated spent fuel to the sodium bisulfite aqueous solution. It was discussed that the trace iodide (below 1 ppm) was determined without the matrix effect of 0.1 M sodium bisulfite and 1 mM $HNO_3$ in aqueous solution by ion chromatography with UV detection. AS4A-SC (DIONEX) column and UV-absorption spectrophotometer were used. The UV-absorption spectra of sodium bisulfite, nitric acid and iodide were obtained, and then 230 nm was selected as an absorption wavelength for iodide determination. 0.1 M NaCl eluent was optimum condition. In this condition the calibration curve of iodide was obtained on the range of about 0-1,000 ppb. The linear coefficient was 0.99993 and the detection limit was 5 ppb. The relative standard deviation was 1.26%.

• Analytical Science and Technology
• /
• v.7 no.3
• /
• pp.261-269
• /
• 1994

The iodide formed stoichiometrically for sulfide by its oxidation with iodate was extracted as an ion-pair with methylene green into 1,2-dichloroethane and the extract was measured spectrophotometrically at 656nm for the determination of sulfide. Hydrogen sulfide separated from the sample matrix was introduced into a solution containing pH 3.5 acetate buffer and iodate, in which the hydrogen sulfide was completely converted into iodide. A linear calibration graph was obtained over the range $3{\times}10^{-7}{\sim}1.2{\times}10^{-5}M$ sulfide($0.0096{\sim}0.384{\mu}g$ of $S^{2-}/ml$) and the detection limit was $0.0032{\mu}g/ml$. The apparent molar absorptivity and a correlation coefficient(r) were $6.7{\times}10^4L\;mole^{-1}\;cm^{-1}$ and 0.999, respectively. When applied to the stream water samples, the proposed method gave a relative standard deviation of 1.59% at $5{\times}10^{-6}M$ sulfide level.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.5
• /
• pp.881-889
• /
• 2016

The VE evaluation process, in which the value is composed of the cost and the function, should have a characteristic of quantitative analysis based on specific figures rather than qualitative approach. However, most of the VE evaluation performed domestically have a problem of having no systematic process of quantification of the function, even though the cost is estimated and analyzed quantitatively. Moreover, in addition to the tendency of strong practical experience, the VE evaluation has the problem of limited application of practical scientific analysis caused by declining the suggestion of creative opinions by over quantification or over objectification. This paper presents the suggestions for improvement of VE evaluation processes, which satisfies the aspects of simplification and objectification, without hindering the essence of the evaluation in the practical business point of view.