• Journal of Korea Water Resources Association
• /
• v.53 no.2
• /
• pp.107-119
• /
• 2020

This study analyzed past drought characteristics based on the observed rainfall data and performed a long-term outlook for future extreme droughts using Representative Concentration Pathways 8.5 (RCP 8.5) climate change scenarios. Standardized Precipitation Index (SPI) used duration of 1, 3, 6, 9 and 12 months, a meteorological drought index, was applied for quantitative drought analysis. A single long-term time series was constructed by combining daily rainfall observation data and RCP scenario. The constructed data was used as SPI input factors for each different duration. For the analysis of meteorological drought observed relatively long-term since 1954 in Korea, 12 rainfall stations were selected and applied 10 general circulation models (GCM) at the same point. In order to analyze drought characteristics according to climate change, trend analysis and clustering were performed. For non-stationary frequency analysis using sampling technique, we adopted the technique DEMC that combines Bayesian-based differential evolution ("DE") and Markov chain Monte Carlo ("MCMC"). A non-stationary drought frequency analysis was used to derive Severity-Duration-Frequency (SDF) curves for the 12 locations. A quantitative outlook for future droughts was carried out by deriving SDF curves with long-term hydrologic data assuming non-stationarity, and by quantitatively identifying potential drought risks. As a result of performing cluster analysis to identify the spatial characteristics, it was analyzed that there is a high risk of drought in the future in Jeonju, Gwangju, Yeosun, Mokpo, and Chupyeongryeong except Jeju corresponding to Zone 1-2, 2, and 3-2. They could be efficiently utilized in future drought management policies.

• Journal of KIISE
• /
• v.42 no.4
• /
• pp.468-474
• /
• 2015

Corporations should make efforts to recognize the importance of projects, identify their failure factors, prevent risks in advance, and raise the success rates, because the corporations need to make quick responses to rapid external changes. There are some previous studies on success and failure factors of projects, however, most of them have limitations in terms of objectivity and quantitative analysis based on data gathering through surveys, statistical sampling and analysis. This study analyzes the failure factors of projects based on data mining to find problems with projects in an audit report, which is an objective project evaluation report. To do this, we identified the texts in the paragraph of suggestions about improvement. We made use of the superior classification algorithms in this study, which were NaiveBayes, SMO and J48. They were evaluated in terms of data of Recall and Precision after performing 10-fold-cross validation. In the identified texts, the failure factors of projects were analyzed so that they could be utilized in project implementation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.199-199
• /
• 2012

기후변화로 인한 기상재해의 피해가 전 세계적으로 계속 증가하고 있으며, 특히 기후변화로 인한 집중호우는 시민들의 안전, 재산, 인명피해를 일으키고 있다. 이러한 피해를 최소화하기 위해서는 한 신뢰성 높은 미래 기후시나리오가 필수적이며, 미래 기후시나리오를 바탕으로 하여 기후변화로 인한 향후 발생할 수 있는 위험성의 정도를 전망하여 적응대책을 수립할 필요가 있다. 본 연구에서는 기후시나리오를 이용하여 한국의 미래 강수량변화를 전망한다. 본 연구를 수행하기 위하여, A2시나리오의 ECHO-G/S에서 생산된 기후 시나리오를 이용하여 지역 기후모델인 RegCM3에 적용하여 기후 시나리오를 생산하였다. RegCM3에서 생산된 기후시나리오는 Sub-BATS라는 기법을 이용하여 한반도 5km 해상도의 기후시나리오가 생산되었다. 또한 생산된 기후시나리오와 비교분석을 위하여 전구 20km 해상도의 기후시나리오를 이용하여 미래 강수량 변화를 각 계급별로 분석 하였다. 역학적 상세화 방법에 의해 생산된 기후시나리오는 전체적으로 과소 추정되는 경향이 크게 나타나고 있었으며, 일강수량의 경우 관측자료 보다 상당히 작게 나타나는 특징이 있었다. 역학적 상세화에 의한 강수량은 기존의 연구에서도 비슷한 특징이 나타나고 있었다. 결과적으로 역학적 상세와에 의한 기후시나리오를 이용하여 미래 강수량 변화를 분석하는 것은 강수량의 경향성을 분석할 수는 있지만 정량적으로 분석하는 것에는 한계가 있다. 전구 20km 해상도의 기후시나리오는 전체적으로 관측자료와 상당히 유사하게 모의되고 있었으며, 일강수량 또한 상당히 유사하게 나타나고 있었다. 전구 20km 해상도의 기후시나리오를 이용하여 미래 강수량을 분석한 결과, 전반적으로 증가하는 경향이 있었으며, 21세기 후반에는 약 18%의 연강수량 증가가 나타났으며, 그 중에서도 겨울철의 강수량 증가가 38%로 가장 크게 나타났다. 강수일수 변화는 약 5mm이하는 감소하는 경향이 있었으며, 5mm 이상은 증가하는 경향이 나타났다. 그리고 각 계급별 강수량 변화는, 상대적으로 강수량이 적은 10, 30mm/day는 여름철에 비해 겨울철에 강수량 증가가 크게 나타나고 있었으며, 상대적으로 강수량이 큰 50, 80, 100, 130mm/day는 겨울철에 비해 여름철에 강수량 증가가 크게 나타났다. 본 연구에서 나타난 결과는 미래 수자원 영향평가 및 적응대책에 유용하게 쓰일 것이다.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.8
• /
• pp.51-62
• /
• 2015

It is not possible to provide resonable evidence for embankment (or dam) overtopping in geotechnical engineering, and conventional analysis by hydrologic design has not provided the evidence for the overflow. However, hydrologic design analysis using Copula function demonstrates the possibility that dam overflow occurs when estimating rainfall probability with rainfall data for 40 years based on fluctuating water level of a dam. Hydrologic dam risk analysis depends on complex hydrologic analyses in that probabilistic relationship needs to be established to quantify various uncertainties associated with modeling process and inputs. The systematic approaches to uncertainty analysis for hydrologic risk analysis have not been addressed yet. In this paper, the initial level of a dam for stability of a dam is generally determined by normal pool level or limiting the level of the flood, but overflow of probability and instability of a dam depend on the sensitivity analysis of the initial level of a dam. In order to estimate the initial level, Copula function and HEC-5 rainfall-runoff model are used to estimate posterior distributions of the model parameters. For geotechnical engineering, slope stability analysis was performed to investigate the difference between rapid drawdown and overtopping of a dam. As a result, the slope instability in overtopping of a dam was more dangerous than that of rapid drawdown condition.

• Journal of the Korean Society for Railway
• /
• v.15 no.6
• /
• pp.550-557
• /
• 2012

In general, FMECA is a technique for identifying failure modes and devices which could result in fatal outcomes. Also it can be used in design or in maintenance through establishing priorities. The purpose of this paper is aimed at improving the driving conditions in advance through analyzing the operation failure phenomena quantitatively with FMECA analysis on the onboard signal system equipped with ATC/ATO, and through deriving the risk factors. This paper suggests an alternative solution for improving the performance of ADU by analyzing a case with FMECA.

• Journal of Navigation and Port Research
• /
• v.40 no.6
• /
• pp.391-400
• /
• 2016

A number of maritime accidents, and accident response activities, including the command and control procedures that were implemented at accident scenes, are analyzed to derive useful information about responding to maritime accidents, and to understand how the chain of events developed after the initial accident. In this research, a new concept of a 'risk based accident response support system' is proposed. In order to identify the event chains and associated hazards related to the accident response activities, this study proposes a 'Brainstorming technique for scenario identification', based on the concept of the HAZID technique. A modified version of Event Tree Analysis was used for quantitative risk analysis of maritime accident response activities. PERT/CPM was used to analyze accident response activities and for calculating overall (expected) response activity completion time. Also, the risk based accident response support system proposed in this paper is explained using a simple case study of risk analysis for oil tanker grounding accident response.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.2
• /
• pp.25-34
• /
• 2010

The building construction projects include a variety of risk factors due to uncertainties. To succeed in the projects, it is important how risks are managed. Risk management is composed of identification, analysis and response. Especially, the risk analysis is important to objectively calculate significance of risk factors. This paper evaluates a method to find priorities of risks using the AHP(Analytic Hierarchy Process). The method has some defects; (1) the consistency becomes weak as the number of pair-wise compared risks is large, and (2) the input and output procedures are complex when risks are added to or removed from a risk database. Thus the paper adopts the PROMETHEE(Preference Ranking Organization METHod Enrichment Evaluations) analysis process which is able to overcome the limitation of the AHP restricted to 9 risk factors. The PROMETHEE makes the procedure of risk analysis simple, when the risk factors pull out and put in the risk database. The purpose of this study is to provide process of risk analysis to use the PROMETHEE.

• Journal of Korea Water Resources Association
• /
• v.47 no.10
• /
• pp.879-889
• /
• 2014

In this study, to estimate loss of life considered flood characteristics using the relationship derived from analysis of historical dam break cases and the factors determining loss of life, the loss of life module applying in LIFESim and loss of life estimation by means of a mortality function were suggested and applicability for domestic dam watershed was examined. The flood characteristics, such as water depth, flow velocity and arrival time were simulated by FLDWAV model and flood risk area were predicted by using inundation depth. Based on this, the effects of warning, evacuation and shelter were considered to estimate the number of people exposed to the flood. In order to estimate fatality rates based on the exposed population, flood hazard zone is assigned to three different zones. Then, total fatality numbers were predicted after determining lethality or mortality function for each zone. In the future, the prediction of loss of life due to dam break floods will quantitatively evaluate flood risk and employ to establish flood mitigation measures at downstream applying probabilistic flood scenarios.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.1 s.35
• /
• pp.29-36
• /
• 2006

In the process of location selection, it is assumed that transformer substation socially recognized as a dangerous facility require especially more rigorous and resonable process. This paper implements suitability analysis for optimum location selection of transformer substation in southern Gyeonggi province using AHP(Analytic Hierarchy Process) and spatial analysis of GIS in terms of safety, national land use, economical efficiency and environment preservation. To do this, necessary data from 1/5,000 digital map are extracted a s raster format for suitability analysis and a field investigation also was done. In the procedure of site selection, three candidate zones with 1.5km radius were selected for the whole research area and then through field survey low transformer sites were selected from candidate zones. In the last the appropriateness of selected sites was evaluated. The results of the suitability analysis showed that the first candidate site satisfied the location condition best and other candidate sites generally showed good location condition.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.2
• /
• pp.79-87
• /
• 2010

This is the first of the two papers dealing with reliability analyses for external and internal stability of a quay wall constructed on a special foundation. A new practical reliability analysis method is proposed in this paper to evaluate the quantitative risk associated with external stability of a quay wall constructed on the deep cement mixed ground. The method can consider uncertainties in various design variables. For the risk estimation to external stability of the improved soil-quay wall, three corresponding limit state functions of sliding, overturning and bearing capacity are fully defined by introducing concept of the secondary random variable. Three representative reliability methods, MVFOSM, FORM and MCS are then applied to evaluate the failure probabilities of the three limit state functions explicitly expressed in terms of the basic and secondary random variables. From the reliability analysis results, the failure probabilities obtained from the three approaches are very close to each other, and the sliding failure mode appears to be the most critical when the earthquake loading is under consideration.