• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.26-29
• /
• 2012

In this paper, we propose a Single Carrier Frequency Division Multiple Access(SC-FDMA) scheme with greatly enhanced tolerance of timing offset among the users. The type of the proposed scheme is similar to code spread Multiple Carrier Direct Spread Code Division Multiple Access(MC DS CDMA). The proposed scheme performs partial Discrete Fourier Transform(DFT) in order to solve high Peak to Average Power Ratio(PAPR) of the MC DS CDMA before Inverse Fast Fourier Transform(IFFT). Exploiting the property Properly Scrambled Walsh-Hadamard(PSW) code has zero correlation despite ${\pm}1$ chip timing offset, the proposed scheme achieves Multiple Access Interference free performance with the timing offset up to ${\pm}1$ OFDM symbol duration with low PAPR. In contrast, the other existing schemes in comparison undergo severe performance degradation even with small timing offset in multipath fading channel.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.4
• /
• pp.471-480
• /
• 2008

COMS Image Data Acquisition and Control System (IDACS) plays a key role in real time ground processing of Meteorological and Ocean observation data. Beyond processing, it serves processed image data and additional data to end users through the spacecraft in the internationally recommended format. The IDACS will be installed at three location (MSC, KOSC, and SOC) and automatically operated 24h/365days. After the IDACS subsystem tests and inter -subsystem interface tests had been completed in the first half of 2008, the acceptance test which was a comprehensive test performed as an integrated form to verify function performance and operational requirements. This paper introduces test objective, preparation, and major result of the COMS IDACS acceptance test.

• The KIPS Transactions:PartD
• /
• v.11D no.7 s.96
• /
• pp.1499-1506
• /
• 2004

In this paper an analysis of current video chatting situation and connection status is performed and a technical method to block the obscene contents is proposed. Methods to shut down socially degenerate Internet sites are well known, which are essentially directory or vocabulary based. For the video chatting sites. however, dynamic selectivity is required as the chatting groups in a sites are all different and even in a single group the contents of chatting may turn socially objectionable as time passes. The proposed method is based on the analysis of chatting contents and selectively blocks the sound and/or video data streams. To prove the effectiveness of the method the experiments are performed and the results are shown very satisfactioy.

• 한국HCI학회:학술대회논문집
• /
• 2007.02b
• /
• pp.489-496
• /
• 2007

u-러닝(u-learning) 체제의 도입은, 다양한 형태의 원격교육을 지원하기 위한 교수-학습 시스템 및 모형을 요구하며, 이에 따라 유무선 인터넷을 이용한 u-러닝 시스템이 지속적으로 개발 적용되어 왔다. 하지만, 현재 운영되고 있는 대부분의 원격교육시스템은 교수자와 학습자간의 지속적인 쌍방향 상호작용 유지의 어려움, 시스템 구축을 위한 경제적 부담, 시스템 운영에 투입되는 교수자의 기술적 소양 부족 등의 문제점을 안고 있다. 이러한 문제점을 해결하기 위해서는 다음 항목에 대한 제고가 필요하다. 첫째, 효율적인 쌍방향 상호작용은 학습자 행동에 대한 지속적인 모니터링 및 피드백, 그리고 교수자의 상시 접속 상태 유지를 전제로 한다. 이는 사이버 교사(cyber tutor)를 이용하는 지능형 학습에 대한 논의로 이어진다. 둘째, 구현될 시스템은 경제성과 재사용성 측면이 고려되어야 하며, 이는 기존의 학교 현장의 인프라를 활용하는 u-러닝 개념의 학습 환경, 즉 이동성 네트워크 구조에 대한 설계가 요구된다. 셋째, 시스템의 직접적인 운영 주체인 일선 교사들의 기술적 소양을 고려할 때, 시스템 구축 및 사용상의 편리성, 학습 진행을 위한 보조적 지원 장치 등이 충분히 전제되어야 한다. 이에 본 연구에서는, 이동성과 내재성의 u-러닝 개념을 포함하고, 지능형 가상 교수자(cyber tutor)에 의한 블랜디드 학습(blended learning)을 도입하며, 사용자의 기술적, 경제적 부담의 제거가 가능한 지능형 u-러닝시스템을 개발하였다. 본 연구에 의해 개발된 시스템은 기존의 네트워크 인프라와 u-러닝의 개념을 통합하는 네트워크 구조, 원격학습을 지원하는 네트워크 화이트보드, 학습 과정의 저장과 해석을 지원하는 스크립트 인터프리터, 학습자 반응에 대한 피드백을 자동 제공할 수 있는 지능형 인터프리터로 구성되었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.9
• /
• pp.862-876
• /
• 1991

In this theses, the procedure for finding the equivalent immittance of an n-line coupled structures is presented in terms of the normal mode parameters of the n-line coupled system. The above generalized equations can be applied to the various Coupled structures including directional couplers, DC blocks, bandpass/band elimination filters, and various other uniformly coupled filters. The design equations are based on a simplified TEM(Quasi TEM) mode. The obtained results and the definition of the scattering parameters for a general coupled line four port with arbitrary terminations are used to present the procedure to determine the optimum physical dimensions matching the given load impedances connected to input, output port. Multiple coupled rnicrostrip two-port with three lines circuit designed shows little discrepancy between the conventional method and this one. Four port with five lines were fabricated on teflon substrate($e$r=2.55) with its thickness h=l.588mm designed at the center frequency, 4 GHz. Their measured results are fairly close to the ones by computation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8A
• /
• pp.592-599
• /
• 2009

In this paper, we consider multiuser multi-input/multi-output antenna systems with zero-forcing receivers in downlink. In this case, to exploit multiuser diversity, spatial-division multiple access (SDMA) system allows to assign different users to a part of transmit antennas at the base station whereas spatial-division multiplexing (SDM) system assigns all antennas to single user's data stream. In this paper, we present analytical frameworks to evaluate performance of these systems. We first analyze the performance of these two systems by deriving closed-form expressions of achievable throughput. Numerical results show that the derived expressions are very tight. In addition, we approximate the capacity expression of SDM and SDMA systems and compare the SDM with the optimal case.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.2
• /
• pp.332-338
• /
• 2010

Annually, electrical fires caused by arcing phenomena in power system rapidly increase as the use of more electric appliances, but there is no established method for the prevention of the accidents. With this background, this paper dealt with the experimental results on a series arc detection technique and a device for air conditioners. Series arcing phenomena that is generated in incomplete connection of air conditioners was simulated, and the frequency spectrum was analyzed. The Fast Fourier Transform (FFT) of the arc pulse showed that the dominant frequency components exist in ranges of 190 kHz~250 kHz and 900 kHz~1.6 MHz. An arc detection circuit with low cut off frequency of 170 kHz to attenuate 60 Hz by 170 dB and a signal discriminator were designed. Also, an algorithm which separate series arc signal from unwanted noises produced by switching operation, inverter, and surge was proposed. Application experiment was carried out on several types of air-conditioners by using the arc generator specified in UL1699, and the results showed the over 99 % accuracy.

• Annual Conference on Human and Language Technology
• /
• 1996.10a
• /
• pp.158-162
• /
• 1996

본 논문에서는 문자출력이 가능한 무선호출기에 음성인식 기술을 접목한, 특성화된 한 음성인식 시스템에 대하여 설명하고자 한다. 시스템 동작 과정은, 일단 호출자가 음성인식 서버와 접속하게 되면 서버는 호출자의 자연스런 입력음성을 인식, 그 결과를 문장 형태로 피호출자의 호출기 단말기에 출력시키는 방식으로 되어 있다. 본 시스템에서는 통계적 음성인식 기법을 도입하여, 각 단어를 연속 HMM으로 모델링하였다. 가우시안 혼합 확률밀도함수를 사용하는 각 모델은 전통적인 HMM 학습법들 중의 하나인 Baum-Welch 알고리듬에 의해 학습되고 인식시에는 이들에 비터비 빔 탐색을 적용하여 최선의 결과를 얻도록 한다. MFCC와 파워를 혼용한 26 차원 특징벡터를 각 프레임으로부터 추출하여, 최종적으로, 83 개의 도메인 어휘들 및 무음과 같은 특수어휘들에 대한 모델링을 완성하게 된다. 여기에 구문론적 기능과 의미론적 기능을 함께 수행하는 FSN을 결합시켜 자연발화음성에 대한 연속음성인식 시스템을 구성한다. 본문에서는 이상의 사항들 외에도 음성 데이터베이스, 레이블링 등과 갈이 시스템 성능과 직결되는 시스템의 외적 요소들에 대해 고찰하고, 시스템에 구현되어 있는 다양한 특성들에 대해 밝히며, 실험 결과 및 앞으로의 개선 방향 등에 대해 논의하기로 한다.

• Convergence Security Journal
• /
• v.14 no.4
• /
• pp.95-100
• /
• 2014

The trend of business work that is related to supply chain changed into e-business using the electronic document However, the small and medium enterprise organizations still use huge volume of paper document, especially in private sector. Recently, the need for eco-friendly and low cost logistics becomes increasing. For this, it has expanded to exchange or to use e-document rather than the paper or manual processing in supply chain business. Therefore, this paper proposed the electronic access system for supply chain by business process modeling. If it is using the proposed system, it can be saving the exchanged or the scanned document to system, and user can utilize that document on just accessing system whenever they need the document. We believe it might reduce the burden of each organization because they don't need to save large volume data to their system or place. Furthermore, the benefits will effect across the national as well as global.

• Journal of Information Technology and Architecture
• /
• v.10 no.2
• /
• pp.273-281
• /
• 2013

Smart work can classify three types. First, mobile office equipped with a portable computer and connect to the company servers and Intranet via mobile phones. Second, home working using video conference system. Third, smart work center. Smart work has enabled us to work efficiently, to work anytime and to work anywhere, beyond conventional office working. This paper presents development processes of a smart work for After Service Business, especially, for the elevator industry. we called implemented mobile office system "A/S work". A/S work using mobile devices has some advantages as compared with previous system. 1) Before/After photo management function 2) Assessment process of customer satisfaction 3) The work history management app. 4) The inquiry and confirmation function to current status of all workers 5) The group SMS function sending selected workers. 'M' elevator company has used A/S work as efficient smart work system.