• 대한조선학회논문집
• /
• 제41권5호
• /
• pp.41-47
• /
• 2004

In this paper, floor impact noise reduction in cruise ship cabin is studied. A mock-up is built by using 6t steel plate, and two identical cabins are made where 25t panel is used to construct wall and ceiling inside the steel structure. Various floating floor systems are tested for which normalized impact noise is measured according to ISO 140-7. In addition, floor SBN (Structure-borne Noise) and floor damping are measured to study the effect of floating floor structure. It is shown that VL(Visco-elastic Layer) is more effective when hard plates are added above the VL.

• Journal of the Korean Wood Science and Technology
• /
• 제37권4호
• /
• pp.310-319
• /
• 2009

대표적인 친환경 소재인 바이오복합재(bio-composite)의 제조를 위해 기질 고분자로는 생분해성 고분자인 polybutylene succinate (PBS)를 그리고 충전제(filler)로는 대나무 분말(bamboo flour, BF)을 사용하였다. 본 연구에서는 BF의 함량 및 입자 크기가 바이오복합재의 기계적 점탄성적 특성 및 열적 특성에 미치는 영향을 평가하였는데 천연충전제인 BF의 첨가에 따라 인장강도는 감소하였지만 점탄성적 및 열적 특성은 고분자와의 상호작용을 통해 보다 안정적인 결과를 보였다. 또한, 소수성을 나타내는 PBS와 친수성인 BF 사이의 낮은 계면 결합이 바이오복합재의 물성 저하에 영향을 미친다는 사실이 확인되었다.

• 대한기계학회논문집
• /
• 제16권7호
• /
• pp.1244-1254
• /
• 1992

본 연구에서는 탄성, 점탄성 및 탄성박판으로 이루어진 복합적층구조물의 진 동특성을 해석함에 있어서 모재 및 구속재의 길이방향변위, 회전관성 그리고 전단변형 의 영향과 접착제의 법선 및 전단변형의 영향을 고려한 계의 운동방정식을 연립 1계 미분방정식의 형태로 유도하고 수치계산 결과를 실험과 비교하였다. 그리고 구속재 와 접착제의 두께변화에 따라서 접착제의 법선 및 전단변형이 계의 감쇠특성에 미치는 영향을 고찰하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.147-147
• /
• 2004

폴리메틸메타크릴레이트(polymethylmethacrylate, PMMA)는 아크릴레이트계 고분자이자 열가소성 플라스틱으로써 LCD용 도광판, 콘택트렌즈, 치과용 레진, DVD 디스크용 소재, 나노임프린트용 피가공재, 나노리소그래피 공정용 레지스트 등 많은 분야에서 활발히 사용되고 있다. PMMA 와 같은 점소성 점탄성 소재의 기계적 성질 측정 및 가공을 위해서는, 응력완화 (stress relaxation), 크립 (creep)등과 같은 시간의존적 변형거동에 대한 연구가 선행되어야 한다.(중략)

• 한국정밀공학회지
• /
• 제20권1호
• /
• pp.172-178
• /
• 2003

Two types of bolted lap joints, one with a viscoelastic layer and the other without the viscoelastic layer were chosen to analyze the dynamic characteristics of the joints with the mechanical properties of the bolts in the joints are considered as computational variables. The finite element method was used along with the modal testing to verify the PEM model. The results in the bolted lap joints reveal that the higher the Young's modulus for the bolts we use the higher the natural frequencies we obtain fur the joints. However, the natural frequency differences in the first and second mode are not substantial but become noticeable in the higher modes. Lower natural frequencies were obtained for the bolted lap joints with the viscoelastic layer when compared with those of the bolted lap joints without the viscoelastic layer. And the differences in the natural frequencies for the two types of joints are relatively small in the first and second mode whereas in the higher mode the differences become significant. The loss factors were observed to be significant especially in the second mode for the bolted lap joints with the viscoelastic layer.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.624-629
• /
• 2001

Two types of bolted lap joints, one with a viscoelastic layer and the other without the viscoelastic layer were chosen to analyze the dynamic characteristics of the joints with the mechanical properties of the bolts of the joints being taken as computational variables. The finite element method was used along with the impact hammer technique to verify the FEM model. The results in the bolted lap joints reveal that the higher the Young's Modulus for the bolts are the higher the natural frequencies results for the joints. However, the natural frequency differences in the first and second mode are not substantial but become noticeable in the higher modes. Lower natural frequencies were obtained for the bolted lap joints with the viscoelastic layer when compared with those of the bolted lap joints without the viscoelastic layer. And the differences in the natural frequencies for the two types of joints are relatively small in the first and second mode whereas in the higher mode the differences become significant. The loss factors were observed to be significant especially in the second mode for the bolted lap joints with the viscoelastic layer.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.1192-1196
• /
• 2001

Damping materials show variant characteristics depend on frequency or temperature condition. Therefore, we need to measure damping material characteristics called a loss factor or a young's modulus varying frequency or temperature condition. In this article, measuring procedure and method has been introduced for damping material using a sticking damping material with a thin steel beam. And it shows a temperature effect to damping materials.

• 한국소음진동공학회논문집
• /
• 제11권9호
• /
• pp.391-397
• /
• 2001

The characteristic values of damping materials are variant on frequency and temperature. We measure the characteristic values(loss factor, young\\\\`s modulus) of damping materials in vibration test. We can not measure characteristic values of damping materials by themselves. So, we proposed a method, sticking damping material to thin steel beam and measuring of characteristic values of damping material on frequency and temperature. We didn\\\\`t use constraining layer but we measured characteristic values on conditioning temperature.

• 한국자동차공학회논문집
• /
• 제10권5호
• /
• pp.138-146
• /
• 2002

The new type of vibration reduction material far an automotive interior, which is spray-type liquid material, is developed in this study The new material has better damping property and lower mass density than other damping materials, for example asphalt sheet. It can be sprayed by an automatic robot, so it is expected to improve productivity and cut down manpower. And it solves a poor adhesion problem and makes an automotive to be lightweight by optimizing spray process. So, It is a next generation automotive vibration reduction material. In this paper, the chemical process for making the new damping materials is described. And then, the damping properties of the vibration reduction materials are analyzed by modal testing of damping treatment specimens. The new vibration reduction materials have good damping properties than asphalt sheet in the experimental results.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.85-86
• /
• 2020

In securing durability of underground structure non-exposed waterproof materials, the company aims to improve durability of waterproof materials by studying more realistic weather conditions than KS standards and developers' durability standards. Analyzing the actual climate data in Korea and the temperature of the basement layer, it is a waterproofing sheet method, a self-adhesive sheet method in which a film and a compound, which are currently widely used as underground water-proofing, and a self-adhesive waterproofing sheet method, etc. We would like to present the guidelines necessary to prevent the temperature situation and waterproof defects that are ideal for setting the endurance conditions later.