• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.1
• /
• pp.109-116
• /
• 2008

In this study, the breads with medicinal herbs (MH) composites showing immunostimulating activity were prepared and their characteristics were examined. Fourteen kinds of medicinal herbs were extracted with hot water and divided into 3 groups (MH-1, MH-2, MH-3) based on their contents. All groups showed immunostimulating activity in terms of macrophage phagocytosis, nitrite production, cytostatic activity and cytokine production. In the preparation of breads containing MH extracts of various contents (0, 30, 50, 70, and 100%), there was no significant difference among dough pHs of all groups after first fermentation, but loaf volume was significantly (p<0.05) increased in 70% added group while decreased in 30%, 50%, and 100% added groups compared to the control. The "a" and "b" values of bread crumb increased with the content of MH extracts while "L" value decreased, but these values of bread crust were similar to the control group. Most improvements in hardness, adhesiveness, gumminess and chewiness of bread were noticed by the addition of 70% MH extracts, but those of springiness, cohesiveness and resilience were mostly by the 50% addition ones. Through the sensory evaluation, it was revealed that mouth feeling, taste and overall preference decreased at breads containing 70% and 100% extracts, although appearance and crumb texture were not significantly (p<0.05) different among all groups.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.4
• /
• pp.17-25
• /
• 2012

In this study, it was carried out reliability analysis and slope stability analysis in a standard cross-sectional embankment on high speed railway. It was confirmed that changing tendency of safety factor with various parameter of each soil materials properties and trends of the probability of failure according to the reliability index. The results have shown that a safety factor were relatively large affected an cohesions and internal friction angle of soil compared to the unit weight of soil. Also, most of the standard cross-sectional embankment in high speed railway was generally evaluated the level of below average (below average) by the reliability analysis according to criterion in US. Army but the 12m height of dry embankment case was shown bad condition as Poor.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.306-310
• /
• 1998

The soluble polyimides(PMDA/diamine/dianhydride) were prepared and investigated. After coating the prepared PMDA/diamine/dianhydride solution into the commercial tubular alumina ceramic membranes, gas permeation characteristics was investigated. $T_g{\prime}s$ of the polyimides were in the range of $337{\sim}358^{\circ}C$ and thermal stability was good. The polymer was soluble in NMP, DMAc, DMSO, THF, and m-cresol. The adhesion between the alumina membrane and the soluble polyimide was excellent. The soluble polyimide/alumina membranes containing 6FDA showed the highest permeability among others. The permeability of nitrogen of PMDA/1,3PDA/6FDA-alumina membrane was about $7.6{\times}10^{-7}(mol/m^2{\cdot}Pa{\cdot}s)$ in the gas permeation experiments. The ideal separation factor of $O_2/N_2$ and $H_2/N_2$ in PMDA/1,3PDA/6FDA-alumina membrane were 6.19, and 70.0, respectively.

• Tunnel and Underground Space
• /
• v.24 no.3
• /
• pp.187-200
• /
• 2014

After excavation or blasting, rock properties within an excavation damaged zone can be perpetually weakened on account of stress redistribution or blasting impact. In the present study, the excavation damaged zone is applied to a rock slope. The objective of this research is to compare the mechanical stability of the rock slope depending on the presence of the damaged zone using 2-dimensional modeling and analyze factors affecting factor-of-safety. From the modeling, it was founded that the mechanical stability of the rock slope is significantly dependent on the presence of the damaged zone. In particular, factor-of-safety with a consideration of the damaged zone decreased by approximately 49.4% in comparison with no damaged zone. Factor analysis by fractional factorial design was carried out on factor-of-safety. It showed that the key parameters affecting factor-of-safety are angle of the slope, cohesion, internal friction angle and height.

• Journal of the Korean GEO-environmental Society
• /
• v.3 no.1
• /
• pp.5-12
• /
• 2002

The effects of ground water level, shear strength parameters of refuse, and geological condition of ground on the slope stability of uncontrolled waste landfill were studied. The Janbu method of slices based on the limit equilibrium method was used to calculate the minimum factor of safety with respect to slope stability of landfill. The analytical results showed that the factor of safety for a fully dried condition of landfill increased 2.4~2.8 times as great as that for a fully saturated condition of landfill. Under the condition of actual ground water level, the factor of safety linearly increased with increasing both cohesion and internal friction angle of refuse. Also, when the potential failure surface passed through the underlying layer, the factor of safety and shape of potential failure surface were found to depend on geological conditions of underlying layer.

• Geotechnical Engineering
• /
• v.11 no.1
• /
• pp.41-50
• /
• 1995

In situ clay soils with Ko condition have anisotropic characteristics, varying the response according to the principal stress direction upon loading. But because of their practicality and simplicity, consolidated isotropic undrained compression tests are commonly used in practice to determine the behavior of cohesive soils. In this study to investigate the anisotropic characteristics and the effects of consolidation stress states on the response of normally consolidated clay soils during shearing, triaxial compression and extension tests after consolidating the undisturbed clay soil samples, which are obtained as a block sample to normalized consolidation states under isotropic or Ko state, were carried out. As a result of tests, the anisotropy of the undrained strength was confirmed. Comparing the soil responses between isotropic and Ko consolidation, the undrained strength by isotropic consolidation is overestimated because of its higher mean consolidation pressure. And isotropic consolidation reduces the anisotropy of soil response and influences on the stress-strain behavior and pore pressure response because the animotropic soil structure is partially collapsed during isotropic consolidation process. Also, OCR in overconsolidated soils is decreased by isotropic consolidatiorL Friction angle in eztension is higher than that in compression, but regression analysis shows that friction angle with cohesion in extension is almost the same as that without cohesion in compresslon.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.539-546
• /
• 2017

In this study, an outstanding anion exchange chemical filter was prepared for acidic gas removal. Commercial anion exchange resin was attached to polyurethane (PU) foam by using different types of pressure sensitive adhesive (PSA). The water and chemical resistance and also adhesive elongation were investigated. Also, the behavior of HCl and HF adsorption was evaluated as functions of the initial concentration and flow rate. ATE-701, AT-4000C and HCA-1000 showed 900, 1,500% and 2,400% of the elongation, respectively. It was confirmed that the desorption ratio of HCA-1000 was less than 6% and had excellent durability in water and chemical resistance tests. The adsorption occurred faster as the concentration and flow rate of HCl and HF increased. But 100% adsorption equilibrium occurred after 110 minutes, regardless of the concentration and flow rate. In addition, SEM morphology showed that the adhesive was uniformly dispersed, while the porous structure of the ion exchange resin was maintained, and the chemical filter exhibited excellent durability for the adsorption/desorption process.

• Journal of the Korean Chemical Society
• /
• v.36 no.6
• /
• pp.947-954
• /
• 1992

Polyethylene glycol (PEG) grafted poly (γ-benzyl L-glutamate) (PBLG) was synthesized by the substitution reaction of PBLG and PEG having primary amino groups at both ends. PEG-g-PBLG films containing hydroxyl group were also prepared by the substitution reaction of PEG-g-PBLG film and ethanolamine (EA). Adhesion of platelets and activation of plasma proteins on the copolypeptide films were studied. The results showed that platelets are less adhered and activated on the PEG-g-PBLG than on other polypeptides and plasma recalcification time (PRT) on the PEG-g-PBLG was longer than that on other polypeptides. These results were consistent with those of blood clotting time and thrombus formation on the polypeptides. As a results, PEG-g-PBLG surfaces showed better blood compatibility than PBLG or PEG-g-PBLG-EA surfaces.

• Korean journal of food and cookery science
• /
• v.22 no.5 s.95
• /
• pp.636-641
• /
• 2006

Jeolpyun with different amounts of added ramie (Ramie Jeolpyun) was prepared and the quality characteristics were examined. Texture profile analysis, Hunters color and total microbial counts were carried out during storage for 4 days. Sensory evaluation was carried out during storage for 2 days. The L value of Jeolpyun with 0% added ramie was one of the highest in the sample and increased with increasing storage time. In texture profile analysis, hardness, chewiness, gumminess were increased with increasing storage time. The hardness of Ramie Jeolpyun with 80% added ramie was one of the lowest in the samples. The total microbial counts of Ramie Jeolpyun were increased during storage. The results of sensory evaluation showed that Ramie Jeolpyun with 60% and 80% added ramie had a high score in color, flavor and softness.

• Korean Journal of Ichthyology
• /
• v.19 no.4
• /
• pp.343-349
• /
• 2007

Embryonic and larval developments on Pacific cod, Gadus macrocephalus are described from laboratory-reared specimens. The eggs (1.075~1.168 mm in diameter) were weakly adhesive, almost spherical in shape, transparent and unpigmented, showing a pale yellow yolk without oil globules. Hatching was occurred 220 hrs after fertilization at $9.8^{\circ}C$. The newly hatched larvae (3.72~4.40 mm in total length, TL) had 43~47 (11~13+32~34) myomeres, mouth and anus which was not yet opened. The yolk was completely absorbed at 4.58 mm TL, and transformed to postlarval stage. Locations of the anus and second dorsal fin origin, and distinctive growth of the larvae head were observed at 5.48 mm TL with melanophores in the gill cover and upper region of the occipital. In addition, melanophores were distinctive in the ventral region and caudal fin base at 6.88 mm TL. All fins were formed with a complete set of fin rays having the following counts (D. 3~7-12~14-13~14; A. 13-15) at 11.54 mm TL. Both lateral line and barbel of lower jaw were observed at 15.07 mm TL.