• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.4
• /
• pp.1000-1007
• /
• 1990

본 연구에서는 이 같은 수차에 대한 이론적 점근을 통해, 수차의 성능을 예측 하고 수차의 특성 및 한계점을 밝히며 성능 향상을 위한 몇가지 제안을 하고자 한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.2
• /
• pp.165-173
• /
• 2010

In this paper, the dynamic stiffness of scaled boundary finite element method(SBFEM) was analytically derived to represent the non-homogeneous space. The non-homogeneous parameters were introduced as an expotential value of power function which denoted the non-homogeneous properties of analysis domain. The dynamic stiffness of analysis domain was asymptotically expanded in frequency domain, and the coefficients of polynomial series were determined to satify the radiational condition. To verify the derived dynamic stiffness of domain, the numerical analysis of the typical problems which have the analytical solution were performed as various non-homogeneous parameters. As results, the derived dynamic stiffness adequatlly represent the features of the non-homogeneous space.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.703-707
• /
• 1989

The ignition of solid particle under strong convective heating has been investigated by applying an asymptotic analysis to a semi-infinite body for varying values of gas recovery temperature and convective heat transfer coefficient. It was found that if the scale of the reaction zone is much smaller than the characteristic length of the body size, then infinite body theory can be used to estimate the ignition delay time. Furthermore, the convective heat transfer coefficient was found to have more influence on predicting the ignition delay times of particle exposed to an incident shock wave rather than the gas recovery temperature.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2006.11a
• /
• pp.279-282
• /
• 2006

본 논문은 시간지연을 갖는 이산 비선형 시스템에 대한 점근적 안정화 및 $H_{\infty}$ 성능을 갖는 퍼지 제어기 설계 방법을 제안한다. 시간지연을 갖는 이산 Takagi-Sugeno 퍼지 모델에 대한 점근적 안정화 및 $H_{\infty}$ 성능을 만족하는 제어기 존재조건을 선형행렬부등식으로 나타낸다. 리아프노프 함수에 조정파라미터를 도입함으로써 제어기 존재조건을 조정파라미터를 포함하는 선형행렬 부등식으로 나타낸다. 선형행렬부등식에 있는 조정 파라미터를 조정함으로써 시스템의 응답속도 및 오버슈트 등의 동적 성능을 개선시킬 수 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.8
• /
• pp.8-17
• /
• 2005

It is well known that preconditioning methods are efficient for convergence acceleration in the compressible low Mach number flows. In this study, the original Euler equations and three differently nondimensionalized preconditioning methods are implemented in two dimensional inviscid bump flows using the 3rd order MUSCL and DADI schemes as numerical flux discretization and time integration, respectively. The multigrid and local time stepping methods are also used to accelerate the convergence. The test case indicates that a properly modified local preconditioning technique involving concepts of a global preconditioning allows Mach number independent convergence. Besides, an asymptotic analysis for properties of preconditioning methods is added.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.4
• /
• pp.51-62
• /
• 2012

According to the Lighthill and Whitham's shock wave model, a shock wave exists even in a homogeneous speed condition. They referred this wave as unobservable- analogous to a radio wave that cannot be seen. Recent research has attempted to identify how such a counterintuitive conclusion results from the Lighthill and Whitham's shock wave model, and derive a new asymptotical shock wave model. The asymptotical model showed that the shock wave in a homogenous speed traffic stream is identical to the ambient vehicle speed. Thus, no radio wave-like shock wave exists. However, performance tests of the asymptotical model using numerical values have not yet been performed. We investigated the new asymptotical model by examining the implications of the new model, and tested it using numerical values based on a test scenario. Our investigation showed that the only difference between both models is in the third term of the equations, and that this difference has a crucial role in the model output. Incorporation of model parameter${\alpha}$ is another distinctive feature of the asymptotical model. This parameter makes the asymptotical model more flexible. In addition, due to various choices of ${\alpha}$ values, model calibration to accommodate various traffic flow situations is achievable. In Lighthill and Whitham's model, this is not possible. Our numerical test results showed that the new model yields significantly different outputs: the predicted shock wave speeds of the asymptotical model tend to lean toward the downstream direction in most cases compared to the shock wave speeds of Lighthill and Whitham's model for the same test environment. Statistical tests of significance also indicate that the outputs of the new model are significantly different than the corresponding outputs of Lighthill and Whitham's model.

• Journal of the KSME
• /
• v.25 no.4
• /
• pp.320-326
• /
• 1985

지난 10여년간의 연소분야에 대한 연구는 크게 세가지 방향에서 괄목할 만한 발전을 이루어 왔다. 그 첫째는 대용량 컴퓨터의 개발에 따른 수치해석능력의 신장을 들 수 있고, 둘째는 실 험에서 레이저를 이용한 비접촉 계측방법의 발달을 들 수 있다. 또한 이론적 관점에서는 1974 년이래 유체역학에서 프란틀의 경계층 이론에 비견될 수 있는 접합점근방법(matched asymptotic technique)를 이용하여 예혼합 화염의 전파속도, 확산화염의 구조 및 점화/소화현상, 열폭발문제, 화염의 안정성 등에 관한 엄격한 해석이 가능하게 되었다. 이로서, 종래의 현상적, 물리적 설 명으로 이해될 수 없었던 분야를 해석할 수 있었다. 이에 따라 본 강좌에서는 연소분야의 이 론적 연구에 초점을 맞추어 접합점근방법의 기초개념 및 해석방법을 소개하고자 한다. 이를 위해 2장에서 확산 화염과 예혼합 화염의 특성을 설명하고, 3장에서 화염면 극한의 해석, 4장에서 확산 화염의 구조해석을 통한 점화/소화현상 및 5장에서 예혼합 화염에의 응용 등을 소개한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.1
• /
• pp.41-47
• /
• 2024

This paper utilizes computational asymptotic analysis to compute the boundary layer solution for composite beams and validates the findings through a comparison with ANSYS results. The boundary layer solution, presented as a sum of the interior solution and pure boundary layer effects, necessitates a mathematically rigorous formalization for both interior and boundary layer aspects. Computational asymptotic analysis emerges as a robust technique for addressing such problems. However, the challenge lies in connecting the boundary layer and interior solutions. In this study, we systematically separate the principles of virtual work and the principles of Saint-Venant to tackle internal and boundary layer issues. The boundary layer solution is articulated by calculating the Papkovich-Fadle eigenfunctions, representing them as linear combinations of real and imaginary vectors. To address warping functions in the interior solutions, we employed a least squares method. The computed solutions exhibit excellent agreement with 2D finite element analysis results, both quantitatively and qualitatively. This validates the effectiveness and accuracy of the proposed approach in capturing the behavior of composite beams.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.1
• /
• pp.17-27
• /
• 2009

Two-phase RoeM and AUSMPW+ schemes are preconditioned for the simulation of all Mach number flows, which are generally of interest for many gas-liquid two-phase application problems, because of large speed of sound in liquid region and low speed of sound in mixture or gas region. Conventional characteristic based schemes lose their accuracy or robustness in low Mach number flows, because their numerical dissipation terms are scaled by speed of sound, which is too large compared with local velocity magnitude in a low Mach region. All speed versions of RoeM and AUSMPW+ reflect the eigenvalues of the preconditioned governing system, which have the same order of magnitude even in low Mach number region. From the asymptotic analysis, it is observed that the discretized system by the developed schemes is consistent with the continuum system in the incompressible limit. The numerical results show the accurate and robust behavior of the proposed shcemes for all speed two-phase flows.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.2
• /
• pp.89-99
• /
• 2001

In the present paper, Helmholtz resonator, which is widely used as a sound-amplification device, is applied to the development of seawater-exchanging breakwater. The incident waves can induce a large response in the resonator when incident wave frequency is close to one of natural modes of the resonator. Largely amplified potential energy due to the resonance supplies clean seawater into the harbor side throughout the channel. Flow supplied by the resonator circulates the seawater of harbor and helps to improve water quality. Within the framework of linear potential theory, matched asymptotic expansion method is employed to analyze the wave responses in a resonator. The semi-circular shape of the resonator has been chosen as an analytic model for mathematical simplicity. The wave responses of both single and arrays of Helmholtz resonator are investi¬gated. To validate an analytic solution, model test is conducted at 2-dimensional wave tanle Wave hcights in the resonator and velocity at the channel are measured for the state of valve-on and valve-off.