• Proceeding of EDISON Challenge
• /
• 제5회(2016년)
• /
• pp.80-85
• /
• 2016

본 연구에서는 Grand-Canonical Monte Carlo 시뮬레이션(GCMC)을 이용하여 서로 반대의 전하를 띤 고분자 전해질의 정전기적 특징을 이해하고, 고분자 전해질 다이오드의 메커니즘을 연구하였다. 고분자 전해질과 서로 반대의 전하를 띤 이온들의 모델은 전하를 띤 free-jointed hard chain과 hard sphere을 이용하였다. 본 연구진은 위와 같은 시뮬레이션을 통해, 평형 상태일 때의 고분자 전해질과 이온의 분포를 연구하였으며, 이 시스템에 전압을 걸어줌에 따라 이온의 이동 모습을 관찰하였다. 또한 전압의 효과와 더불어 고분자 전해질의 농도와 이온들의 크기 변화에 대해서도 연구를 진행하였다.

• KOREAN POULTRY JOURNAL
• /
• 제29권7호통권333호
• /
• pp.180-181
• /
• 1997

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 한국환경과학회 2008년도 추계학술발표회 발표논문집
• /
• pp.350-354
• /
• 2008

전기/UV 공정에 사용하기 위해 일반적인 살균 램프인 UV-C 램프와 오존도 같이 발생하는 오존 등의 RhB 분해능을 고찰한 결과 오존 램프의 RhB 제거율이 UV-C램프보다 높은 것으로 나타났다. 전해질을 첨가하지 않은 전기/UV 공정에서 최적 전류는 1 A로 나타났다. 전기/UV 공정에서 RhB 제거의 경우 전기분해 공정과 UV 공정의 단일 공정의 RhB 농도감소와 전기/UV 복합 공정의 RhB 제거는 같아 공정의 시너지 효과는 관찰되지 않았다. 그러나 COD의 경우 전기분해 공정과 오존 램프에 의한 단일 공정의 COD 제거보다는 전기/UV 공정의 COD 제거농도가 높아 시너지 효과가 나타나는 것으로 사료되었다.

• Journal of the Korean Electrochemical Society
• /
• 제19권2호
• /
• pp.45-49
• /
• 2016

In order to mitigate oxidative degradation of polymer membrane during fuel cell operation, an organic radical quencher was introduced. Rutin was selected as a radical quencher and mixed with sulfonated poly(arylene ether sulfone) to prepare composite membrane. Physicochemical properties of the composite membranes such as water uptake and proton conductivity were characterized. Hydrogen peroxide exposure experiment, which can mimic accelerated oxidative stability test during fuel cell operation, was adopted to evaluate the oxidative stability of the membranes. The composite membranes containing Rutin showed similar proton conductivity and enhanced oxidative stability compared to pristine ones.

• Journal of the Korean Chemical Society
• /
• 제34권1호
• /
• pp.44-50
• /
• 1990

The liquid chromatographic retention behavior of structural isomers of phenols was investigated by a change of the mobile phase properties. The retention behavior of structural isomer of phenols in reversed phase liquid chromatography was affected by eluent electrolyte added. It can be seen that this behavior is illustrated by a mechanism of Langmuir isotherm and ion exchange between phenolate and the reversed phase coated with ions. The retention behavior was represented as two different areas according to the concentration of the electrolytes. These areas can be explained as counter ion and co-ion effect, respectively. The maximum retention values were dependent not upon the kinds of organic modifier but upon the kinds of electrolyte.

• Journal of the Korean Institute of Gas
• /
• 제19권1호
• /
• pp.57-63
• /
• 2015

The hydrogen was charged TRIP steel by electrochemical method under 0.5M $H_2SO_4$ electrolyte and 0.5M NaOH electrolyte with hydrogen charging conditions respectively. The degree of hydrogen embrittlement of TRIP steel was evaluated by using micro Vickers hardness tests. These results showed that the degree of hydrogen embrittlement in acidic electrolyte with hydrogen penetration and hydrogen diffusion through the depth of specimen was more sensitive than its alkaine electrolyte between two type electrolytes. However, it was investigated that micro Vickers hardnesses of surface in acidic electrolyte under two electrolyte were higher than those of alkaine electrolyte. It was thought that in case of hydrogen embrittlement in acid-ice electrolyte, hydrogen charging time was more effective than current density, in case of alkaine electrolyte, hydrogen current density was more effective than charaging time.

• Journal of the Korean Institute of Telematics and Electronics
• /
• 제19권6호
• /
• pp.52-54
• /
• 1982

p·Si-전해질 접합을 전해질로 6N H2SO4, 6N H2SO4(Ti3+), 6N H2SO4(Ti4+), 6N H2SO4(Ti4+/Ti3+)을 사용하여 만들었다. 이들 전해질중 6N H2SO4(Ti4-/Ti3+)을 사용할 때 p·Si 광음극이 안정하게 동학하며 높은 광전 감도를 가지고 있었다. p·Si-electrolyte junction are prepared by using p·Si photocatode in four different electrolytes such as 6N H2SO4, 6N H2SO4(Ti3+), 6N H2SO4(Ti4+), 6N H2SO4(Ti4+/Ti3+) respectively. Among those electrolytes 6N H2SO4(Ti4-/Ti3+) shows very good results, in which p·Si photocathode is stable.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.300-300
• /
• 2010

Thiourea가 염료감응 태양전지의 I-/I3- redox 전해질 내에서 additive로 사용될 때의 효과를 알아보았다. I-/I3- 가 존재하는 전해질에 thiourea를 첨가하게 되면, 전류는 40% 증가하고 전압은 9% 내려간다. 전류 증가로 인해 전체 효율은 23%의 증가분을 보인다. thiourea가 녹아있는 acetonitrile 용액은 pH가 10로 Bronsted base인데, I-/I3- 가 존재하는 전해질 용액에 thiourea를 넣으면, pH=3의 변화를 보인다. 이것은 thiourea와 iodine 사이의 반응에 의해 수소이온 농도가 증가했기 때문이다. 또한 UV-Vis 분광분석 결과 I3- 농도가 감소한 것을 확인하였으며, 이는 iodine이 thiourea 와 반응에 참여하여 소모되었기 때문에 상대적으로 I3- 농도가 감소한 것으로 해석할 수 있다. I3- 농도 감소로 인해 recombination 이 감소하여 voltage가 증가할 것으로 기대되었으나, I2와 thiourea의 반응으로 인해 생성된 proton 농도로 인해 TiO2 의 전도띠 에너지가 변화가 더 우세하게 일어나 결과적으로는 voltage가 감소한 것이다. 증가된 photocurrent 의 경우 역시, proton 농도 증가 및, iodide 농도 증가로 설명할 수 있었다.

• Applied Chemistry for Engineering
• /
• 제20권6호
• /
• pp.700-704
• /
• 2009

The electrochemical properties of porous carbon electrodes as a function of their internal electrolyte concentration were investigated. Cyclic voltammetry, chronoamperometry, and impedance spectroscopic analysis were conducted for carbon electrodes equilibrated with 0.01, 0.05, 0.1, and 0.5 M KCl solution and covered with a cation-exchange membrane. The specific capacitance of the electrodes increased as the internal electrolyte concentration increased, due to a decrease in charging resistance. Experimental results indicated that the salt removal efficiency of the membrane capacitive deionization process could be enhanced by increasing the internal electrolyte concentration, even for an influent with a low salt concentration.

• Composites Research
• /
• 제28권5호
• /
• pp.285-290
• /
• 2015

Multiscale multiphysics in structural batteries make mechanical property testing difficult. In this research, the effect of electrolyte-coating on the mechanical performance of carbon fabric was studied using a suitable mechanical test method for structural batteries. For this experiment, two types of specimens were determined their dimension according to ASTM. One type of specimen was smaller than the standard dimension. The specimens were coated by spreading the electrolyte material on carbon fabric, hardened using epoxy, and tested for tensile properties using universal testing machine. As a result, it was found that the mechanical properties of carbon fabric were not influenced by electrolyte coating. In addition, the small-scale specimen used in this experiment was determined to be sufficiently reliable.