• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1847-1853
• /
• 2014

The PAPR of the input signal is increased due to OFDMA signal in a mobile communication system. High efficiency of a power amplifier, which accounts for power consumption, is a very important key technology. Digital Pre-Distortion techniques were used to improve the linearity of the power amplifier. The Asymmetric Doherty scheme was used to improve the efficiency of the power amplifier. In this paper, we propose a new structure of Asymmetric Doherty. Drive power amplifier part is separated as main path and peak path, and phase shifter is employed to improve power combine characteristics of the Doherty Amplifier. Also, envelope tracking technology for drive gate bais in drive peak amplifier is used to improve efficiency.

• Journal of IKEEE
• /
• v.4 no.2 s.7
• /
• pp.241-248
• /
• 2000

A linear power amplifier is particular emphasized on the CDMA system using a linear modulation scheme, because intermodulation distortion which cause adjacent channel interference and co channel interference is mostly generated in a nonlinear power amplifier. In this paper, a new type of linearization technique proposed. It is presented that balanced MESFET predistortion linearizer added. Experimental result are present for Korea PCS(Personal Communication Service) frequency band. The implemented linearizer is applied to a 30dBm class A power amplifier for simulation Performance. The predistortion linearizer improves the 1dB compression point of the HPA about 2dBm, and intermoudulation distortion about 12.5dBc.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.328-336
• /
• 2006

A novel pre-equalization method for terrestrial DTV transmitters is presented. A pre-equalizer has been used in transmitters to correct group delay and amplitude distortions caused by a channel filter. In the proposed pre-equalizer, an equation-error adaptive IIR filtering scheme is adopted unlike the conventional pre-equalization using FIR filtering schemes. The pole-zero modelling property of IIR filters improves the signal-to-noise ratio and may deal with diverse linear distortions existing in DTV transmitters as well as the channel filter distortion. Simulation results show that the proposed IIR pre-equalizer performs better than the FIR pre-equalizer in terms of the residual mean-square error.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.959-966
• /
• 2006

This paper proposes a new concept about dual band predistortion linear power amplifier(PD LPA) using diplexer for digital cellular ($f_o$=880 MHz) and IMT-2000($f_o$=2,140 MHz) base stations. The diplexer is composed of low pass filter having defected ground structure(BGS) microstrip line and high pass filter having high-Q lumped capacitors and distributed elements. The proposed predistorter adopts a reflection type intermodulation signal generator with 3 dB hybrid coupler for good reflection characteristic. for a forward link one carrier CDMA IS-95A 1FA and WCDMA 1FA signal, the proposed dual band PD LPA shows the adjacent channel leakage ratio(ACLR) improvement about 10 dB and 9.36 dB for digital cellular and IMT-2000 band, respectively.

• Journal of Advanced Navigation Technology
• /
• v.23 no.2
• /
• pp.179-185
• /
• 2019

In this paper, we have studied narrow-band analog pre-distortion linearization technique using UHF 400 MHz band 20 W power amplifier. The analog pre-distorter used the SC1894 radio frequency power amplifier linearizer(RFPAL) provided by MAXIM Corp and through the look-up table technique confirmed the intermodulation distortion(IMD) performance and the adjusted channel leakage ratio(ACLR) improvement for bandwidth below 1 MHz which does not operate on existing chips. In the 400 MHz (400 ~ 500 MHz) band, IMD performance and the ACLR improvement of up to 17.46 dB based on 1-channel offset and up to 16.6 dB based on 2-channel offset were confirmed. In the system requiring the same linearity, we confirmed power efficiency improvement of 12.41% at output power of over 40 W.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.2
• /
• pp.197-205
• /
• 2000

The back-off input power level method is generally used for design of high linear mixer. In this paper, the predistortive mixer design method which attaches the predistortor in front of mixer is proposed to compensate the nonlinear characteristics of mixer and the predistortor has inverse nonlinear characteristics of mixer. The proposed method improves C/I ratio of mixer by 22 dB (@Po=-20 dBm/tone), 21.7 dB(@Po=-17 dBm/tone) with two tones of RF at 1852.5MHz, 1857.5MHz and LO at 2015MHz, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10C
• /
• pp.1027-1031
• /
• 2002

In this paper, the non linear characteristics of HPA (High Power Amplifier) is improved by using predistorter. Predistorter consists of 0 degree and 90 degree couplers, complementary amplifier, shottky diodes, and attenuators. Gain of the Linearized HPA is 54㏈ at 1960㎒ - 1980㎒. IMD (Inter Modulation Distortion) characteristic shows -58㏈c at 39㏈m/tone ⓐ1.23㎒. The IMD performance of this predistorter is improved by 14㏈.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.450-457
• /
• 2003

In this paper, we studied the effect of asymmetrical 3rd order IMD of power amplifier due to changes in modulation frequency on IMD cancellation performance. The phase extraction method for determining asymmetric rate for phase distortion of IMD is proposed and the phase difference between lower and upper 3rd order IMD is measured by this method. The phase compensation circuit to decrease the phase difference is also designed and fabricated. From the measurement results using the phase compensation circuit applied to 5 W RF power amplifier fur PCS applications, the 3rd order IMD cancellation performance can be achieved up to 2-tone spacing 1.5 MHz (phase difference within 10$^{\circ}$).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.7
• /
• pp.685-691
• /
• 2004

In this paper, we propose the hybrid methods of SLM(selected mapping) and predistortion, and PTS(partial transmit sequence) and predistortion to reduce PAPR(peak to average power ratio) and to decrease the nonlinear distortion of the nonlinear HPA(high power amplifier) in the multi-code CDMA(code division multiple access) system. The phase rotation factors are transmitted as side information in PTS and SLM methods play an important role in the BER performance. So, we present the theoretical BER equation when the errors of side information are considered in the multi-code CDMA communication system. Simulation results show that PAPR is reduced and nonlinear distortion is compensated by hybrid methods. Therefore BER performance is enhanced.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.686-693
• /
• 2001

In this paper, a new carrier complex power series which represents nonlinear transfer function of high power amplifier is derived. Using this transfer function, the nonlinear transfer function of predistortive circuit for linearizing the distortion effect of a HPA(High Power Amplifier) is derived and fabricated. A measured gain and $P_{1dB}$ of the fabricated HPA in IMT-2000 basestation transmitting band are 34.06 dB and 35.4 dBm. The predistortive circuit using inverse carrier complex power series is fabricated and operated with HPA. The predistortive HPA improves C/I(Carrier to Intermodulation) ratio of HPA by 17.01 dB(@Pout=25.43 dBm/tone) with 2-tone at 2.1375 GHz and 2.1425 GHz.