• Korean Journal of Construction Engineering and Management
• /
• v.11 no.3
• /
• pp.23-32
• /
• 2010

Construction Projects have mutual collaborative structures among various participants for common objectives. Most of all the design project which is the initial phase in the project is crucial for determining project overall quality and requires intimate and continuous relations between project participants. Thus, this study suggests Design Collaboration Management System for successful performing projects through cooperation among participants in the initial stage of projects. First, expert interviews were performed to figure out present conditions of design collaboration management and problems. The factor analysis was applied to draw owner's collaboration factors and engineer's collaboration factors. Based on those factors, this study suggests design cooperation management process which gives a framework for systematic management method. Through the process the design collaboration management system was developed which helps owner/designers/engineer's co-work. The System suggested from this study realizes systematic information management tool and through that it is expected to improve design product;'s quality, and further contribute the advancement of project.

• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.5
• /
• pp.213-217
• /
• 2001

Excessive memory buffer requirement in continuous media playback is a serious impediment of wide spread usage of on-line multimedia service. Skewed access frequency of available video files provides an opportunity of re-using the date blocks which has been loaded by one session for later usage. We present novel algorithm which minimizes the buffer requirement in multiple sessions of multimedia playbacks. In continuous media playback originated from the disk, a certain amount of memory buffer is required to synchronize asynchronous disk. Read operation and synchronous playback operation. As aggregate playback bandwodth increases, larger amount of buffer needs to be allocated for this synchronization purpose. The focus of this work is to study the asymptotic behavior of the synchronization buffer requirement and to develop an algorithm coping with this excessive buffer requirement under bandwidth congestioon. We argue that in a large scale continuous media server, it may not be necessary to read the blocks for each session directly from the disk. The beauty of our work lies in the fact that it dynamically adapts to disk utilization of the server and finds the optimal way of servicinh the individual sessions while minimizing the overall buffer space requirement. Optimality of the proposed algorithm is shown by proof. The effectiveness and performance of the proposed scheme is examined via simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2C
• /
• pp.206-216
• /
• 2012

Today's war fields can be characterized by net-centric wars where a variety of independent weapon systems are operated in connection with each other via networks. As such, weapon systems become dramatically advanced in terms of complexity, functionality, precision and so on. It is then obvious that the defense R&D of those requires systematic and efficient development tools enabling the effective management of the complexity, budget/cost, development time, and risk all together. One viable approach is known to be the development methods based on systems engineering, which is already proved to successful in U.S. In this paper, a systems engineering approach is studied to be used in the conceptual design of advanced weapon systems. The approach is utilizing some graphical models in the design phase. As a target system, an unmanned aerial vehicle system is considered and the standard SysML is also used as a modeling language to create models. The generated models have several known merits such as ease of understanding and communication. The interrelationships between the models and the design artifacts are identified, which should be useful in the generation of some design documents that are required in the defense R&D. The result reported here could be utilized in the further study that can eventually lead to a full-scale model-based systems engineering method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.1023-1031
• /
• 2010

With recent advances in hardware and wireless communication techniques, wireless multimedia sensor network which collects multimedia data through wireless sensor network has started to receive a lot of attentions from many researchers. Wireless multimedia sensor network requires a research of efficient compression and transmission to process the multimedia data which has large size, in the wireless sensor network that has very low network bandwidth. In this paper, we propose PIT protocol for the transmission based on the priority that classified by the DPCM compression. The PIT protocol sets different priority to the each subbands which are divided by the wavelet transform. The PIT protocol transmits the data with higher priority to guarantee the high image quality. The PIT protocol uses the characteristic of wavelet transform that the transformed image is very insensible to the data loss. In PIT protocol, each subbands of wavelet transformed image has fair weight in the compressed image to utilize the prioriy based transmission. The experiment results show that the PIT protocol improves the quality of image in spite of data loss.

• Journal of Korea Water Resources Association
• /
• v.38 no.8 s.157
• /
• pp.655-664
• /
• 2005

A real-time monitoring and modeling system (RTMMS) for rainfall-induced turbidity flow, which is one of the major obstacles for sustainable use of reservoir water resources, is under development. As a prediction model for the RTMMS, a laterally integrated two-dimensional hydrodynamic and water quality model, CE-QUAL-W2 was tested by simulating the temperature stratification, density flow regimes, and temporal and spatial distributions of turbidity in a reservoir. The inflow water temperature and turbidity measured every hour during the flood season of 2004 were used as the boundary conditions. The monitoring data showed that inflow water temperature drop by 5 to $10^{\circ}C$ during rainfall events in summer, and consequently resulted in the development of density flow regimes such as plunge flow and interflow in the reservoir. The model showed relatively satisfactory performance in replicating the water temperature profiles and turbidity distributions, although considerable discrepancies were partially detected between observed and simulated results. The model was either very efficient in computation as the CPU run time to simulate the whole flood season took only 4 minutes with a Pentium 4(CPU 2.0GHz) desktop computer, which is essentially requited for real-time modeling of turbidity plume.

• The Korean Journal of Mycology
• /
• v.48 no.4
• /
• pp.407-414
• /
• 2020

To replace the sawdust in the growth medium of oyster mushroom to utilize its by-product spent mushroom substrates (SMS) as feed for ruminant, we performed cultivation test using cotton seed hull pellet (CSHP), corn stalk pellet (CSP), corncob (CC), and analyzed the feed chemical properties of those SMS. As a result of cultivation test, CC and CSHP treatment took 27 days for spawn run, 4 days for primordium formation, and 3 days for development fruiting bodies, resulting in a total cultivation period of 34 days. The yield per bottle was 134 g for CC treatment, similar to 130 g for control, while CSHP treatment (112 g) and CSP treatment (68 g) were lower than that of control. The highest biological efficiency (BE) was shown in CC treatment as 80.1%, which was 11.4% higher than 68.7% of control. The SMS of CC treatment had a relatively low content of neutral detergent fiber and acid detergent fiber, and in particular, lignin content was the lowest and crude protein content was the highest among other treatments. Therefore, CC as a substitute material for sawdust was capable of stable mushroom production and excellent nutritional value as a feed for its by-products.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.23 no.1
• /
• pp.117-128
• /
• 2021

The skeletal muscle development of Hanwoo steer has been processed in the prenatal and postnatal periods. Bovine satellite cell located in perimysium of muscle tissues has differentially distributed in peripheral tissues. The study of postnatal development of satellite cells can help understand the genetic and functional regulation of meat characteristics. Factors affecting muscle size increase are related to the accumulation of DNA or synthesis of RNA proteins. In this study, we observed muscle development and differentiation after culturing bovine satellite cells derived from longissimus dorsi and semimembranosus regions of Hanwoo muscle tissue. In addition, RNA sequencing data were analyzed for differentially expressed genes (DEG) involved in intracellular muscle development and growth. The DEG of the two muscle tissues were compared according to 1day, 2day, 4day, and 7day. The overall gene expression level was confirmed by the heat map. Gene Ontology (GO) classification method was used to compare the expression level of gene groups affecting LD and SM development. The histology of GO was consistent with the time-cause change of LD and SM cell morphology. SM showed more active skeletal muscle development than LD. Even within the same time, SM expressed more genes than LD, thus synthesizing more muscle fibers

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.6
• /
• pp.251-261
• /
• 2022

This paper describes the finite element analysis and die design change of spring retainer forging process to reduce the cold forging load and plastic forming stress concentration. Plastic deformation analysis was carried out in order to understand the forming process of workpieces and elastic stress analysis of the die set was performed in order to get basic data for the die fatigue life estimation. Cold forging die design was set up to each process with different four types analysis progressing, the upper and lower dies shapes with combination of fillets and chamfers shapes of cold forging dies. This study suggested optimal cold forging die geometry to reduce cold forging load. The design parameters of fillets and chamfers are selected geometry were selected to apply optimization with the DoE (design of experiment) and Taguchi method. DoE and Taguchi method was performed to optimize the workpiece preform shape for spring retainer forging process, it was possible to expect an increase in cold forging die life due to the 20 percentage forging load reduction.

• The Journal of Bigdata
• /
• v.7 no.2
• /
• pp.153-172
• /
• 2022

Online shopping has transformed and rapidly grown the entire market at the forefront of wholesale and retail services as an effective solution to issues such as digital transformation and social distancing policy (COVID-19 pandemic). Small business owners, who form the majority at the center of the online shopping industry, are constantly collecting policy changes and market trend information to overcome these problems and use them for marketing and other sales activities in order to overcome these problems and continue to grow. Objective and refined information that is more closely related to the business is also needed. Therefore, in this paper, through the collection and analysis of big data information, which is the core technology of digital transformation, key variables are set in product classification, sales trends, consumer preferences, and review information of online shopping malls, and a method of using them for competitor comparison analysis and business sustainability evaluation has been prepared and we would like to propose it as a service. If small and medium-sized businesses can benchmark competitors or excellent businesses based on big data and identify market trends and consumer tendencies, they will clearly recognize their level and position in business and voluntarily strive to secure higher competitiveness. In addition, if the sustainable growth of the online shopping mall operator can be confirmed as an indicator, more efficient policy establishment and risk management can be expected because it has an improved measurement method.

• Journal of Korea Port Economic Association
• /
• v.30 no.4
• /
• pp.69-89
• /
• 2014

The business performance of port industry is steadily getting worse due to international environmental regulation. The port industry should be prepared according to ambient condition change. IMO(International Maritime Organization) is tightening up environmental regulation of vessel and maritime industry field. ECA(Emission Control Area), starting with the Baltic, has initialized and has been expanded. Korea must strengthen the control of vessel in accordance with IMO's restriction, if Korea is designated as emission control area. These situations cause the expansion of LNG-fuelled ships. Add to the larger trend of ships, Korean government should be done a preemptive action against LNG bunkering industry. This study proposes the concept of floating offshore LNG bunkering system and is conducted its economic feasibility evaluation based on empirical analysis. We examine the theoretical foundation and basic information via "A Planning Study on the Engineering Development of Floating Offshore LNG Bunkering Terminal" in 2013 and we evaluate the business potential by using the report above mentioned. The results of this study are as follows. The values of B/C analysis are between 0.679 and 2.516 depending on market share and R&D contributiveness. In case of 10.9%(market share), if market share are 50% and 60%, the value of B/C analysis are 0.697 and 0.837 respectively. Except in two cases, all remaining values are over 1.0. Moreover, the research is conducted sensitivity analysis to remove the project uncertainty. In order to maintain economical validity, a project manager have to establish business strategies which are not to cause increase of expense and sustain market share and R&D contributiveness in the scenario with normal levels.