• Korean Journal of Agricultural Science
• /
• v.11 no.1
• /
• pp.160-175
• /
• 1984

This study was carried out to analyze the effects of the revolution and forwarding speed of the rotary blade and the edge curves which were $30^{\circ}$ and $40^{\circ}$, on the power requirement of rotary tillage. In this study, the revolutions of the rotary blade considered were 204, 243, 285, 360 rpm, and the forwarding speeds of the rotary system considered were 29.40cm/sec, 46.93em/sec. The power requirements of rotary blade were measured by a dynamic strain gage systems at the soil bin which was filled with artificial soil. The results of the study were summarized as follows: 1. The response surface analysis showed that the revolution and forwarding speed of the rotary shaft had an interacting influence on the torque requirement of the rotary blade. The mathematical model developed by the above was repersented as follow. $$T=a_0+a_1V+a_2R +a_3VR+a_4VR^2$$ where, $a_0=constant$ $a_1,\;a_2,\;a_3,\;a_4=coefficients$ V=forwarding speed of the rotary system. (em/sec) R=revolution of the rotary shaft. (rpm) T=tilling torque requirement. (kg-m) 2. When the maximum tilling torque requirement was analyzed, ${\partial}T/{\partial}R$ was decreased with the increasing revolution of rotary shaft, while ${\partial}T/{\partial}V$ was increased, which was minimum at 200~220 rpm. When the forwarding speeds were increased, ${\partial}T/{\partial}R$ was decreased with increasing rate. 3. When the mean tilling torque requirement was analyzed, ${\partial}T/{\partial}V$ was constant at 320~360 rpm and ${\partial}T/{\partial}R$ was decreased with increasing rate along with the increasing revolution of rotary shaft. 4. When the mean tilling torgue requirement per unit volume of soil was analyzed, ${\partial}T/{\partial}V$ was minimum at 270~300 rpm. ${\partial}T/{\partial}R$ for the forwarding speeds of 29.40cm/sec and 46.93cm/sec was same as that for 280~290 rpm. 5. Increasing the edge curves of the rotary blades, the tilling torque requirement was increased. But other studies showed that the smaller the edge curve, the more straw could be wrapped on blades which resulted in increasing torque requirements. Therefore, the edge curve of rotary blade should be considered for the future study.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.1
• /
• pp.40-53
• /
• 1996

In this paper, the wave drift damping is studied. An approximate method is adopted to calculate the wave drift damping for the sake of practical applications. By assuming the ship's forward speed to be low, the Green function and the velocity potential are expanded asymptotically with respect to the Brard number(${\tau}$) and terms up to the first order of ${\tau}$ are retained. Mean wave drift forces are computed straightforwardly. The wave drift damping is estimated as the change rate of the mean wave drift force with respect to the ship's speed. In order to validate the present method, Series 60(Cb=0.7) ship is exemplified for forward speed of Fn=0, 0.02 and 0.04. To predict the wave drift damping experimentally, three geosym models of the Esso-Osaka tanker are used. Also the effect of drift angle on the wave drift damping is also considered. Comparisons between numerical and experimental results show reasonable agreements.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.1
• /
• pp.57-62
• /
• 1990

This paper deals with the flow caused by a two-dimensional pulsating source, which moves with a constant horizontal speed beneath the free surface. The analysis is based on lincar potential theory including surface tension effects. In the case of subcritical reduced frequencies $\tau<1/4(\tau=U_{\omega}/g$, U=constant speed, $\omega$=circular frequency, g=gravitational acceleration), six wave components arc found. Two of them are largely affected by surface tension, which propagate ahead of the source in the direction of and opposite to the steady translation, respectively. The rest are almost identical with those found by Haskind(1954), i.e. for which the surface tension effect is negligible. For low oscillation frequencies, the resonant frequency still exists at $\tau$ only slightly greater than 1/4. For oscillation frequencies greater than $\nu(={\omega}^2/g)>20$, the surface tension effect is so significant that it disperses generated waves and consequently the singular phenomenon is removed. However, in addition to the gravity breaking, capillary breakings occur when the translation speed coincides with the minimum capillary celerity.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.2
• /
• pp.30-37
• /
• 2000

The roll damping characteristics of the three models of a 3ton class fishing vessel, that is the bare hull, hull with bilge keels, and hull with bilge keels and a central wing are investigated by the free roll tests in head waves in a towing tank with the variations of the forward speed, initial angle and OG. The wave length variations are also included. The experimental results are compared with the numerical results of mathematical modellings by the energy method for these three models and the energy dissipation patterns are also compared. The roll damping speed increases, the effect of the waves on the roll damping of the models with the additional devices is negligible due to the much increased damping caused by the lift increase.

• Journal of the Korea Society for Simulation
• /
• v.19 no.3
• /
• pp.17-25
• /
• 2010

It is necessary for the ship dynamic models to realize ship dynamics and to achieve the real-time analysis in the manoeuvring simulation. Generally, simple dynamic models, such as 1st-order differential equation models of turning angle, turning rate, and forward speed, are used in the manoeuvring simulation for multiple ships. Ship dynamic modeling and parameter estimation methods based on its turning test results are proposed in this paper. Parameter estimation methods for the constant speed model and the speed-changing model are mathematically developed and verified by comparing with turning test results of a real ship.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.3
• /
• pp.291-305
• /
• 2010

A three-dimensional time-domain calculation method is of crucial importance in prediction of the motions and wave loads of a ship advancing in a severe irregular sea. The exact solution of the free surface wave-ship interaction problem is very complicated because of the essentially nonlinear boundary conditions. In this paper, an approximate body nonlinear approach based on the three-dimensional time-domain forward-speed free-surface Green function has been presented. The Froude-Krylov force and the hydrostatic restoring force are calculated over the instantaneous wetted surface of the ship while the forces due to the radiation and scattering potentials over the mean wetted surface. The time-domain radiation and scattering potentials have been obtained from a time invariant kernel of integral equations for the potentials which are discretized according to the second-order boundary element method (Hong and Hong 2008). The diffraction impulse-response functions of the Wigley seakeeping model advancing in transient head waves at various Froude numbers have been presented. A simulation of coupled heave-pitch motion of a long rectangular barge advancing in regular head waves of large amplitude has been carried out. Comparisons between the linear and the approximate body nonlinear numerical results of motions and wave loads of the barge at a nonzero Froude number have been made.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.240-243
• /
• 2001

괘도차량에 부착된 물분사추진기의 유동해석을 실험과 포텐셜해석 그리고 점성해석을 사용하여 그 결과를 비교하였다. 예인수조에서 여러 차량 전진속도에 대해서 임펠러 회전수를 조정하여 제트속도를 변화시키면서 덕트표면에서의 정압을 계측하였다. 이는 제트시스템의 효율을 추정하기 위함이고 관로를 통한 에너지분포를 알 수 있다. 점성유동해석을 위해 지배방정식은 비압축성 Navier-Stokes 방정식을 유한체적법을 사용하여 이산화하고 해석하였으며 난류영향은 표준 ĸ-$\varepsilon$난류모형을 사용하여 유동을 해석하고 실험결과 및 포텐셜 해석결과와 비교하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.9-11
• /
• 2018

선박의 파랑 중 조종성능 변화를 추정하기 위하여 선박해양플랜트연구소 공학수조에서 KCS 선형의 모형선으로 파랑 중 자유항주모형시험을 수행하였다. 파향, 파고, 파장 등이 변화는 규칙파 상태에서 KCS 선형의 35도 선회시험을 수행하여 파 중 선회궤적변화를 관찰하였고, 정상선회 상태에서 속도기반 궤적밀림 지수를 계산하였다. 계산된 속도기반 궤적지수를 정수 중 초기선회 상태에 외력으로 작용하여 그 시뮬레이션 결과를 보정하고 이를 파랑 중 초기선회 성능과 비교분석하였다. 그 결과 초기 선회 중 도출되는 선회성능인 전진거리, 전술선회직경은 선수파일 경우, 모형선의 전진방향 속도 변화를 추가적으로 고려해야함을 확인하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.3
• /
• pp.258-268
• /
• 2008

The radiation potential of a ship advancing in waves is studied using the 3D time-domain forward-speed free-surface Green function and the Green integral equation. Numerical solutions are obtained by making use of the 2nd order BEM(Boundary Element Method) which make it possible to take account of the line integral along the waterline in a rigorous manner. The 6 degree of freedom motion memory functions of a hemisphere and the Wigley seakeeping model obtained by direct integration of the time-domain 3D potentials over the wetted surface are presented for various Froude numbers.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.6
• /
• pp.498-504
• /
• 2011

The flapping characteristics and advance ratios at torque equilibrium state of autorotation were investigated when the airspeed, shaft angle, and pitch angle were varied. To simulate the airspeed increase, the aerodynamic data analyzed by using the compressible Navier-Stokes solver and Pitt/Peters inflow theory were used. Transient Simulation Method(TSM) was used to catch the torque equilibrium states. The maximum flapping angles at torque equilibrium state were correlated to the airspeed, shaft angle, and pitch angle. By comparing flapping behavior to the variation of advance ratio, the phenomenon that the extension of reverse flow area of retreating blade affects the characteristics of autorotation was qualitatively considered.