• Electrical & Electronic Materials
• /
• v.22 no.8
• /
• pp.18-24
• /
• 2009

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.203-211
• /
• 2013

UHF RFID tag designers usually ndde the chip impedance and read power sensitivity value obtained when a tag chip is mounted on a chip pad. The chip impedance, however, is not able to be supplied by chip manufacturer, since the chip impedance is varied according to tag designs and fabrication processes. Instead, the chip makers mostly supply the chip impedances measured on the bare dies. This study proposes a chip impedance and read power sensitivity evaluation method which requires a few simple auxiliary and some RF measuring equipment. As it is impractical to measure the chip impedance directly at mounted chip terminals, some form test fixture is employed and the effect of the fixture is modeled and de-embeded to determine the chip impedance and the read power sensitivity. Validity and accuracy of the proposed de-embed method are examined by using commercial RFID tag chips as well as a capacitor and a resistor the value of which are known.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.3
• /
• pp.1-7
• /
• 2007

RFID ( Radio Frequency IDentification ) is an automatic realization technology that recognizes things or a person with data stored tag, card, label, etc that have microchip by using radio frequency. Automation and efficient data base management(DBM) of system are possible by replaces using Bar-code that is used widely with using RFID. In this paper, we designed RFID tag data format that used to recognize information of books in Library and implemented library management system. Library management system is divided checking collection of books, self-loaning books system, self-returning books system, management books information system for a librarian. RFID leader realized information of tag and transfer it to host computer through RS-232 interface. Host computer processes and operates information with middleware. System that we made is depending on executive system for a librarian.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.9
• /
• pp.141-146
• /
• 2015

Recently, people are consuming more fermented food for its health benefits. When we think of fermented food, skate comes to mind. However, there are different preferences depending on the degree of fermentation. Thus, if there is a system that shows the degree of the fermentation on skate, people can eat according to their taste. This paper proposes a design of skate fermentation monitoring system for consumer taste using the smart RFID tag. The proposed system consists of the RFID tag, $NH_3$ sensor, reader, and server. In order to confirm the usefulness of the proposed system, we performed experiments on the skate fermentation. The proposed monitoring system can show the skate fermentation at 4 grades: None, Low, Medium, and Strong. With the smart RFID tag, we successfully estimated the skate fermentation.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.2
• /
• pp.57-62
• /
• 2009

In this paper, we proposed the metal tag antenna of PIFA structure with an isotropic radiation pattern when tag attached the metal material. The antenna consist of antenna body, horizontal patch and ground, and inserted a substrate with high dielectric constant between the antenna body and ground in order to miniaturize the antenna size. The antenna body with symmetric structure is designed to produce an oppositely directed currents. The simulation shows the impedance bandwidth has 20 MHz (900 ~ 920 MHz) and the maximum radiation gain satisfy the -10 dBi and -15 dBi when the tag is in air and attach the metal material. Also, the proposed antenna operates with an isotropic radiation pattern due to satisfy the gain deviation lower than 6 dB, respectively.

• Journal of Biosystems Engineering
• /
• v.27 no.5
• /
• pp.459-466
• /
• 2002

In Korea, a need of automatic dairy farm management system has been increased to lower production cost and to strengthen international competition. However, the present management system was mostly relied on foreign technologies and caused some problems in post management and after-sales services. Therefore, though there is a problem of price and quality at present, domestic technologies of the management system should be developed for the long run. This study was conducted to develop an electronic identification unit for an automatic dairy farm management system. The developed system was consisted of a tag, a reader, a switching circuit, and a personal computer. The tag attachable to each individual cow was developed to transmit individual radio frequency(RF) code into the air with modulation of ASK(amplitude shift keying). And the switching circuit was added to avoid confusion on reception and transmittance. The reader attached to a feeding device was developed to transmit activating signal periodically and to identify code of the individual tag when the tag was approached to the device. The reader was consisted of an active filter, a detecter, a comparator and a microcontroller. The test result was feasible enough to apply it for the automatic farm management system and the identified maximum distance was about 37cm.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.101-106
• /
• 2014

As ESL(Electronic Shelf Label) system is increased at the market in the world, the interference between ESL system and Wi-Fi(Wireless Fidelity) Cellular Phone at 2.4GHz becomes issue. The interference scenario and propagation of the Extended HATA Model were established to analyze the interference from Wi-Fi Cellular Phone into ESL system. Through simulation results based on SEAMCAT(Spectrum Engineering Advanced Monte Carlo Analysis Tool), separation distance was obtained to protect ESL system from Wi-Fi Cellular Phone interference.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.1343-1346
• /
• 2004

RFID(Radio Frequency Identification) 시스템은 최근 다양한 분야로의 적용이 기대되면서, 개발이 급증하고있다. RFID 시스템은 물류관리, 보안, 유비쿼터스 등 많은 분야에서 시스템의 중추적인 기술로 사용된다. RFID 시스템을 구성하는 인터로게이터(Interrogator)와 태그(Tag)의 개발이 빠르게 진행 중에 있다. 본 논고에서는 ISO/IEC 18000-6 Type B를 만족하는 UHF 대역의 RFID 태그를 VHDL를 사용하여 설계하고 구현하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.962-963
• /
• 2013

트위터 해시태그(#, HashTag)는 트윗(Tweets)에서 특정 키워드나 내용을 주제별로 분류하고 검색을 보다 효율적으로 사용하기 위한 사용자 정의 태그이다. 사용자가 정의하기에 따라 다양한 형태로 작성되기 때문에 오히려 검색의 효율성이 떨어질 수 있으며, 사용자는 자신이 작성한 트윗에 어떤 해시태그를 추가해야 하는지에 대한 궁금증이 생기는 경우가 발생한다. 본 논문에서는 이러한 문제를 해결하기 위해 사용자가 작성한 트윗에 적합한 해시태그를 추천하는 기법을 제안한다. 수집한 트윗과 해시태그의 키워드를 추출하고 트윗의 유사도를 계산하기 위해 TF-IDF와 Cosine Similarity를 적용하여 유사한 트윗을 갖는 해시태그를 추천한다. 본 논문에서 제안된 기법을 검증하기 위한 실험으로 추천의 정확성을 평가했다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.203-208
• /
• 2021

At the manufacturing site, workers have been operating by inputting materials into the manufacturing process and leaving input records according to the work instructions, but product LOT tracking has been not possible due to many omissions. Recently, it is being carried out as a system to automatically input materials using RFID-Tag. In particular, the initial automatic recognition rate was good at 97 percent by automatically generating input information through RACK (TAG) ID and RACK input time analysis, but the automatic recognition rate continues to decrease due to multi-material RACK, TAG loss, and new product input issues. It is expected that it will contribute to increasing speed and yield (normal product ratio) in the overall production process by improving automatic recognition rate and real-time monitoring through the establishment of artificial intelligent smart factory datasets.