• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.5
• /
• pp.201-208
• /
• 2008

An active RFID system has the advantages of a long identification distance and a good identification rate as well as overcoming the passive RFID's drawback such as the lowering of identification rate on metal materials. So, the development of an active RFID system has been gradually increasing in harbor logistics and the national defense area. On the other hand, some identification failures between products developed under the same standards have been reported, and there are difficulties in evaluating the interoperability between developed Products and standard conformance test because an accurate evaluation method and equipment has not been established at the international level. Motivated by these, this study presents a realization of the hardware and software of emulator to evaluate the standard conformance of an active RFID system, Performance of the designed system are then analyzed by means of simulations of Matlab/Simulink, and the applicability of the emulator is verified by evaluating the standard conformance of a real active RFID tag.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.2
• /
• pp.1-9
• /
• 2010

Feistel and SPN are the two main structures in a block cipher. Feistel is a symmetric structure which has the same structure in encryption and decryption, but SPN is not a symmetric structure. In this paper, we propose a SPN which has a symmetric structure in encryption and decryption. The whole operations of proposed algorithm are composed of the even numbers of N rounds where the first half of them, 1 to N/2 round, applies a right function and the last half of them, (N+1)/2 to N round, employs an inverse function. And a symmetry layer is located in between the right function layer and the inverse function layer. In this paper, AES encryption and decryption function are selected for the right function and the inverse function, respectively. The symmetric layer is composed with simple matrix and round key addition. Due to the simplicity of the symmetric SPN structure in hardware implementation, the proposed modified AES is believed to construct a safe and efficient cipher in Smart Card and RFID environments where electronic chips are built in.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.9
• /
• pp.75-84
• /
• 2009

In this paper, the EPC Network as the most important technologies in the field of applied technology research and special attention to the use of RFID to better manage the disease in infected U-MAS (U-Medical Administrative Services) system was designed. U-MAS system, the Center for Disease Control in the illness, depending on the type of isolate and treat infected patients, recovery, discharge, isolation wards and intensive italian to manage and increase efficiency, manual and use a simple computer program improve the qualify of the current level, using RFID tags to improve the management of the patient everything that a little more and be out of the isolation ward, if competent disease management districts, such as the location to respond more quickly to facilitate the purpose is to contribute to. First, EPC Network and related technology for mobile RFID systems and related technology research. U-MAS system design offers. If you take advantage of the proposed U-MAS system for monitoring infectious disease patients and patients in the isolation ward, when the unauthorized departure location to shorten the time it takes to improve the effectiveness of disease management and present the elected effects was.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.961-964
• /
• 2013

Arduino is for design based on open source prototyping platform, artist, designer, hobby activists, etc, i has been designed for all those who are interested in the environment construct. Arduino adventage you can easily create applications hardware, without deep knowledge about the hardware. Configuration of arduino using AVR microcontroller ATmage 168, software to action arduino using arduino program, MATLAB, Processing. Arduino is open source base, you can hardware production directly and using shield additionally, the arduino can be combined. Android is open source. Continue to expand through a combination of hardware, Arduino. It name is shield. Be given to the Arduino Uno board to the main board, the shield extends to the various aspects and help can be equipped with more features. The shield on top of the shield can be combined as a kind of shield and Ethernet shield, motor shield, the shield RFID hardware beyond a simple extension can be configured. In this paper, sortware was used for arduino program, hardware was used for arduino Uno board, the additional shield using RFID shield. Configure the hardware to be compatible with this tag combined the 13.56MHz tag SM130.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.6
• /
• pp.1124-1131
• /
• 2006

The recent medical treatment guidelines and the development of information technology make hospitals reduce the expense in surrounding environment and it requires improving the quality of medical treatment of the hospital. Moreover, MIS, PACS(Picture Archiving and Communication System), OCS, EMR are also developing. Medical Information System is evolved toward integration of medical IT and situation is changing with increasing high speed in the ICT convergence. Mobile component refers to construct wireless system of hospital which has constructed in existing environment. Through RFID development in existing system, anyone can log on easily to internet whenever and wherever. It is the core technology to implement automatic medical processing system. This paper provides a basic review of RFID model, PACS application component services. In addition, designed and implemented database server's component program and client program of mobile application that recognized RFID tag and patient data in the ubiquitous environments. This system implemented mobile PACS that performed patient data based db environments, and so reduced delay time of requisition, medical treatment, lab.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.171-179
• /
• 2011

Feistel and SPN are the two main structures in a block cipher. Feistel is a symmetric structure which has the same structure in encryption and decryption, but SPN is not a symmetric structure. Encrypt round function and decrypt round function in SPN structure have three parts, round key addition and substitution layer with S-box for confusion and permutation layer for defusion. Most SPN structure for example ARIA and AES uses 8 bit S-Box at substitution layer, which is vulnerable to Square attack, Boomerang attack, Impossible differentials cryptanalysis etc. In this paper, we propose a SPN which has a symmetric structure in encryption and decryption. The whole operations of proposed algorithm are composed of the even numbers of N rounds where the first half of them, 1 to N/2 round, applies a right function and the last half of them, (N+1)/2 to N round, employs an inverse function. And a symmetry layer is located in between the right function layer and the inverse function layer. The symmetric layer is composed with a multiple simple bit slice involution S-Boxes. The bit slice involution S-Box symmetric layer increases difficult to attack cipher by Square attack, Boomerang attack, Impossible differentials cryptanalysis etc. The proposed symmetric SPN block cipher with bit slice involution S-Box is believed to construct a safe and efficient cipher in Smart Card and RFID environments where electronic chips are built in.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.4
• /
• pp.42-50
• /
• 2009

Ubiquitous computing technology is widely used in not only our everyday lives but also in education, medical care, military, environment and administration. RFID system, the basis of ubiquitous, is in the spotlight which can be an alternative solution of a bar code recognition system and magnetic system as they basically have practicality and security issues. An electronic authentication named smart-key system is recently concerned by an alternative solution of the security unit for an automobile. RFID system which has a general purpose is also in the limelight by an application technology. In this paper we designed vehicle smart key system with general-propose RFID system that is already in use. First, we designed control unit and RFID card reader for vehicle smart key system. Then we propose an algorithm and prove that the vehicle key system is controllable by showing the result of implementing and testing, after installing. Also security level is enlarged by proposing a authentication protocol between RFID reader and control unit.

• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.219-226
• /
• 2013

Organic semiconductor-based soft electronics has potential advantages for next-generation electronics and displays, which request mobile convenience, flexibility, light-weight, large area, etc. Organic field-effect transistors (OFET) are core elements for soft electronic applications, such as e-paper, e-book, smart card, RFID tag, photovoltaics, portable computer, sensor, memory, etc. An optimal multi-layered structure of organic semiconductor, insulator, and electrodes is required to achieve high-performance OFET. Since most organic semiconductors are self-assembled structures with weak van der Waals forces during film formation, their crystalline structures and orientation are significantly affected by environmental conditions, specifically, substrate properties of surface energy and roughness, changing the corresponding OFET. Organo-compatible insulators and surface treatments can induce the crystal structure and orientation of solution- or vacuum-processable organic semiconductors preferential to the charge-carrier transport in OFET.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.3
• /
• pp.29-37
• /
• 2008

In this parer, we purpose for applying the RFID(Radio Frequency IDentification) system in National Road Traffic Volume Survey. Because there is limitation for shipping RFID Tag on every car, we firstly defined Expansion (process of making the number of all cars which passed survey point from sampling data) and determined the best methodology among 3 methodologies (Time factor Model, Fuzzy Model, Artificial Neural Network). As a result of analysis, Time Factor Model was chosen as the best methodology for Expansion. Also, we analyzed to find an application of the RFID system in National Road Traffic Volume Survey and obtained a possibility applying it. It is expected that if the RFID system is used in Traffic Volume Survey, the survey cost is saved than before.

• Journal of Animal Environmental Science
• /
• v.12 no.2
• /
• pp.61-66
• /
• 2006

This study was carried out to investigate the relationship between the physical dimensions of ear and age for swine. The physical dimensions of ear and weight for twenty pigs were investigated on 1, 20, 40, 90, 120, and 150 days of age, respectively. The thickness of ear was measured at the upper, middle, and lower part of fore perimeter, and the middle and lower part of hind perimeter. The length of ear was measured for width and height. The thickness of ear increased rapidly from 1 day to 20 days of age, then it developed gradually after that period of time. The thickness at the lower part of fore perimeter increased most rapidly from 1 day to 20 days of age. In the length of ear, width increased gradually whereas height increased rapidly from 1 day to 90 days of age and then they almost did not. All the regression equations between the physical dimensions of ear and age were best represented by $Y=a+b\;X^{0.5}$. These results suggest that RFID has to be installed on the middle part of hind perimeter and an ID chip has to be installed on the lower part of fore perimeter.