• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.599-601
• /
• 2011

무선 센서 네트워크를 구성하는 센서노드들이 클러스터를 구성하고 선출된 클러스터 헤드가 클러스터 내의 센서노드들로부터 데이터를 받아서 병합한 다음, 기지국으로 데이터를 전달하는 클러스터 기반 라우팅 방법이 연구되어 왔다. 이 클러스터 기반 라우팅 방법에서 클러스터 헤드에 고장이 발생한다면, 해당 클러스터의 데이터는 기지국으로 전달할 수 없어 데이터 신뢰성에 문제가 생긴다. 이러한 문제를 해결하기 위해, 본 논문에서는 고장감내를 지원하는 클러스터 기반 라우팅 방법을 제안한다. 제안한 방법은 각 클러스터마다 백업 클러스터 헤드를 지정하여 원래의 클러스터 헤드에 고장이 발생한다면 백업 클러스터 헤드가 그 역할을 대신하도록 함으로써 데이터 전달의 신뢰성을 보장한다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.9
• /
• pp.47-53
• /
• 2011

The signal transmission properties of the connector such as insertion loss and return loss are investigated using analysis procedure of S-parameter simulation, equivalent model extraction, and characteristic impedance calculation. S-parameter simulation is performed by connector's modeling and solving based on 3-dimensional finite element method. The connector's equivalent model of ${\pi}$ type is are proposed and extracted with an optimization process of circuit analysis simulator. The characteristic impedance of the connector is calculated with results of circuit analysis simulation and S-parameter data. According to the connector's characteristic impedance, it's revised design is carried out. In this work, the connector's effective contact area is increased and its body is applied as a high dielectric material in order to increase its capacitance and then obtain impedance matching. Therefore, return loss of the connector is improved by approximately 10 dB due to its design revision.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.8
• /
• pp.714-722
• /
• 2009

This paper presents a new sound source externalization algorithm for increasing spaciousness and presence on earphone or headphone environments. To do this, we used modified head related transfer functions (M-HRTFs) and room impulse responses acquired by an acoustic simulation method. M-HRTFs developed by ETRI have less tone color distortion of original sound sources than traditional HRTFs. The acoustic simulation method is used to obtain more natural reflected sound. To verify the proposed externalization algorithm, we performed a listening test. From the test, the proposed algorithm is effective in externalizing the sound sources especially when they are on the left and right sides.

• Electronics and Telecommunications Trends
• /
• v.12 no.3 s.45
• /
• pp.11-17
• /
• 1997

ITS(Intelligent Transportation System)는 H/W 중심의 차량 및 교통 기반 기설에 통신.전자.제어.컴퓨터 등 S/W 중심의 기술을 적용하여, 각 차량 및 교통 시설(신호등, 도로, 교통 안내 표지판, 도로 상황판 등)들이 상호 보완적으로 작동할 수 있게 함으로써, 기존의 도로 교통 시설의 이용 효과를 극대화하고, 그 안정성을 향상시키며, 교통 수요 관리를 목적으로 사용자에게 교통 정보를 제공하는 지능형 종합 기술 체계이다. 이러한 최첨단 도로교통 관리의 ITS를 이용한 서비스는 각 나라마다 달리 정의되는데, 우리나라에서는 첨단교통관리시스템(ATMS), 첨단교통정보시스템(ATIS), 상용차량 운행관리 시스템(CVO), 차량 및 도로 시스템(AVCS) 그리고 첨단 대중교통 시스템(APTS)의 5개 분야로 나누어진다(1). 이 다섯가지 ITS 서비스 시스템은 공통적으로 정보 수집, 정보 처리, 정보 전달, 정보 통신 기능을 가지고 있다. 즉, 각종 검지기, 차량 단말, 노변 단말 등의 수집 장치에서 수집된 정보(정보 수집)는 관련 통신 방식(정보 통신)을 통하여 중앙 정보 처리 센터에 전달되어 그 서비스 요구 사항에 따라 처리(정보 처리)되고, 생성된 정보는 해당되는 통신 채널을 거쳐(정보 통신) 각종 사용자 단말기에게 제공(정보 전달)된다. 본 논문에서는 이와 같은 ITS체계의 정의, 목표 및 서비스 종류에 대하여 설명하였으며 교통 정보를 수집하고 처리하여 전달하는 과정과 이에 요구되는 통신 체계에 대하여 알아본다.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.3
• /
• pp.9-14
• /
• 2012

Robust power delivery and distribution are considered one of the major challenges in electronic devices today. As a technology develops (i.e. frequency and complexity, increase and size decreases), both power density and power supply noise increase, and voltage supply margin decreases. In addition, thermal problem is induced due to high power and poor power distribution. Until now most of studies to improve power delivery and distribution have been focused on device circuit or system architecture designs. Interconnect process technologies to resolve power delivery issues have not greatly been explored so far, but recently it becomes of great interest as power increases and voltage specification decreases in a smaller chip size.

• Polymer(Korea)
• /
• v.26 no.4
• /
• pp.543-550
• /
• 2002

We have synthesized a novel carrier transporting copolymer having triphenylamine moiety as a hole transporting unit and triazine moiety as an electron transporting unit in the polymer side chain. Single-layered organic electroluminescent (EL) devices consisted of ITO/copolymer and emitting materials (DCM, coumarin 6, DPvBi)/Al exhibited maximum external quantum efficiency when the ratio of hole transporting unit and electron transporting unit is 6:4 and the content of emitting material is 30 wt%. Especially, the devices emitted the light of red (620 nm), green (520 nm) and blue (450 nm) corresponding to the emitting materials, respectively. A maximum luminance of ITO/copolymer (6:4) and DCM (30 wt%)/Al EL device was about 500 cd/$m^2$ at a DC drive voltage of 12V.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.921-924
• /
• 2007

본 논문에서는 멀티 홉 무선 네트워크에서 적용 가능한 통합적인 MAC 및 라우팅 프로토콜인 ExOR 의 성능개선을 위한 방안을 제시하였다. ExOR 은 무선 네트워크의 전송이 브로드 캐스트 방식으로 이루어지는 것을 이용하여 기회주의적인 라우팅을 시도함으로써 멀티 홉 무선 네트워크에서 링크의 사용량을 낮추고 쓰루풋을 높일 수 있는 전송 기법이다. 하지만 ExOR 은 멀티 홉 무선 네트워크의 크기가 확장되거나 링크의 전송률이 낮다면 라우팅에 참여하는 노드들의 패킷 전달이 원활하지 않기 때문에 지연시간이 크게 증가하여 성능이 급격히 저하되는 단점이 있다. 본 논문에서는 ExOR 라우팅 프로토콜을 적용 시, 패킷을 전달하는 노드 이외의 다른 노드들이 자기 차례가 되기 전까지 아무 일도 하지 않는다는 점에 착안하여 동시에 2 개 이상의 노드가 패킷을 전달하는 방식을 제안하였다. 본 논문에서는 ExOR 라우팅에 참여하는 노드가 패킷을 전달 할 때, 패킷 간 충돌 및 간섭을 최소로 할 수 있는 2 개 이상의 다른 노드를 선택하여 동시에 패킷 전송을 시도하는 방식으로 지연시간을 줄이고, 쓰루풋을 향상시키는 것을 시뮬레이션을 통하여 확인하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.4
• /
• pp.465-471
• /
• 2011

This study was to examined the acceptance of communication for people through smart phone focused users of smart phone. The results were as follows. First, smart phone's mobility influenced positively on attitude toward the transmission of government policy. smart phone's personal appropriateness influenced positively on awareness toward the transmission of government policy and usefulness toward the transmission of government policy. And smart phone's usefulness influenced positively on usefulness toward the transmission of government policy. Second, smart phone's ease of use influenced positively on awareness toward the transmission of government policy. smart phone's security influenced negatively on awareness, usefulness, attitude toward the transmission of government policy. smart phone's connectivity influenced positively on awareness toward the transmission of government policy. Third, usefulness and attitude toward the transmission of government policy through smart phone influenced positively on acceptance intention.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.47-53
• /
• 2013

In this work, signal transmission properties of SATA connector have been improved using its differential impedance calculation and its design revision to closer impedance matching. Using 3 dimensional electromagnetic field simulator, the differential mode S-parameter was calculated to investigate its signal fidelity. The differential impedance is calculated from the equation of the odd mode impedance with inductance, capacitance, mutual inductance, and mutual capacitance. The differential impedance of SATA connector was calculated to be $107.3{\Omega}$ and did not meet the design specification with $100{\Omega}{\pm}5%$. In order to achieve its impedance range and improve its signal transmission properties, SATA connector's design has been revised with two different directions and analyzed through the calculation of differential impedance, differential reflection loss, and differential insertion loss.

• Fire Science and Engineering
• /
• v.23 no.5
• /
• pp.153-160
• /
• 2009

This study aims to review the propagation characteristics of fire alarm sound in building through computer simulation. In order to achieve this goal, the sound power level of existing three different emergency alarms were measured in an anechoic chamber. Sound power level of alarm bell was 98.6dB and electronic-siren speaker was 95.7dB, and electronic-siren phon was 101.8dB at the voltage of DC 24V in the condition of anechoic chamber. As the results of acoustic simulation, it was shown that sound levels at the corridor of the building were relatively high and even. But, there were large difference in sound level at all the frequency bands between corridor and lecture rooms. This mean that alarm sound couldn't be recognized sometimes in lecture rooms. Through the computer simulation, the propagation characteristics of fire alarm sound could be forecasted and compared due to plans of buildings.