• Korean Journal of Breeding Science
• /
• v.43 no.1
• /
• pp.81-91
• /
• 2011

Rice wild relatives have been recognized as reservoirs of genetic reinforcements to improve cultivating rice against biotic and abiotic stresses. A wild relative, Oryza. minuta(BBCC; Acc. 101141), was hybridized with a Korean Japonica cultivar, 'Hwaseong'(AA), followed by ovule culture and several times of back crossings to overcome high level of sterility. During evaluation of the introgression lines, breeding line exhibited resistance to bacterial blight with reasonable agronomic performances, and nominated as an elite breeding line, the 'Suweon497'. A mapping population, to dissect genetic basis of the resistance, was constructed by using $F_2$ progenies of the 'Suweon497' ${\times}$ 'Milyang23'. Association analysis between SSR marker genotypes and pathogenisity levels of each $F_2$ progeny revealed the end terminal region of rice chromosome 11 as the nesting place for the wild rice derived bacterial blight resistance gene, where at least four other genes, Xa3, Xa4, Xa26 and Xa31, have been reported.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.29-34
• /
• 2019

Silicon carbide is considered to be a potentially useful material for high-temperature electronic devices, as its large energy band gap and the p-type and/or n-type conduction can be controlled by impurity doping. Particularly, electric conductivity of porous n-type SiC semiconductors fabricated from ${\beta}-SiC$ powder at $2000^{\circ}C$ in $N_2$ atmosphere was comparable to or even larger than the reported values of SiC single crystals in the temperature region of $800^{\circ}C$ to $1000^{\circ}C$, while thermal conductivity was kept as low as 1/10 to 1/30 of that for a dense SiC ceramics. In this work, for the purpose of decreasing sintering temperature, it was attempted to fabricate porous reaction-sintered bodies at low temperatures ($1400-1600^{\circ}C$) by thermal decomposition of polycarbosilane (PCS) impregnated in n-type ${\beta}-SiC$ powder. The repetition of the impregnation and sintering process ($N_2$ atmosphere, $1600^{\circ}C$, 3h) resulted in only a slight increase in the relative density but in a great improvement in the Seebeck coefficient and electrical conductivity. However the power factor which reflects the thermoelectric conversion efficiency of the present work is 1 to 2 orders of magnitude lower than that of the porous SiC semiconductors fabricated by conventional sintering at high temperature, it can be stated that thermoelectric properties of SiC semiconductors fabricated by the present reaction-sintering process could be further improved by precise control of microstructure and carrier density.

• The Korean Journal of Archival Studies
• /
• no.37
• /
• pp.145-188
• /
• 2013

The purpose of production status report is figuring out the amount of records produced by departments and record centers and establishing plans for transfer and collect of archives. These are the main functions of production status report clarified by Public Records Management Act. Production status report is introduced as the means to control the record management in public institutions which lack the understanding of the record production and management. Up to now, public institutions carry out production status report. However, it only has been done as a formal procedure and records collected unsurely transfer to Archives. The implementation of production status report does not accord with the original purpose. In addition, there are different views about the appropriateness of production status report. Record managers in the field, the researchers who made efforts to state production status report in the law and the archives did not reached the agreement of opinions yet. The objective of this study is not to judge whether production status report is of importance or not. Although its significance is controversial, it's one of the most important record management tasks and it stands the position as the distinct method in Korea. Nonetheless, the issue that production status report lacks efficiency in the field due to the lack of support of forms and systems brings up continuously. Thus, I evaluated current functions of production status report and proposed future improvements so that it accomplishes its original intent and support users in the field.

• The Korean Journal of Archival Studies
• /
• no.52
• /
• pp.241-275
• /
• 2017

This study reinterprets the meaning of the record contents from the viewpoint of the record continuum to find ways to enhance the usability of records that are emphasized by the electronic record environments. In general, in academic discussions and practical examples, record contents are recognized as digital media produced by putting a high level of computer technologies and a big budget based on some records related to specific subjects. To enhance the usability of, and spread the meaning through, records, it is necessary to shift the awareness in record contents. For this purpose in Chapter 2, to grasp the meanings of the church records as well as the utilization direction, it is necessary to analyze the organization and function. Therefore, the analysis of the organization and function of the church was examined. In Chapter 3, this study attempted to find the meaning of the contents of church records in each dimension of the record continuum in relation to the mission of the church, which was identified through the organization and function analysis of the church. In Section 3, which corresponds to Dimension 4, the meaning of church record contents is diversified in society. In the end, this study suggests that the meaning and use value of records can be found in everyday life and can then be spread to society as well.

• The Korean Journal of Archival Studies
• /
• no.42
• /
• pp.3-35
• /
• 2014

Archival science is prior to explore meaning and role of record management in given environments rather than developing record management methodology. Electronic record environments don't merely mean to exchange record management medium from paper to digital. The most important point exploring in electronic record environments is not management skills or methods, but meaning of records and role of record management in contemporary society. All these days, however, the theories and methodologies has been developed focusing on written records and public records mainly in the deep-rooted influence of positivism. In such situations, the discussions of social memories can explore meanings and roles of record management in pluralistic society. Meanwhile, many articles in archival science has been widespread recognition that records will soon be just memories in terms of objective and neutral evidence. In recently, however, conviction on objectivity and neutrality of records has broken down by the influence of postmodernism on archival science. Therefore this article intends to explore the relationship between record and memory and to argue the roles of archival science for building social memories.

• Journal of Life Science
• /
• v.31 no.2
• /
• pp.164-174
• /
• 2021

This study confirmed the potential of Punica granatum L. extract for functional activity verification and cosmetic development. The electron-donating ability of Punica granatum L. extract was shown 60.6% at a 1,000 ㎍/ml concentration. Its ABTS+ radical scavenging ability was shown 93.9% at a 1,000 ㎍/ml concentration. Additionally, the inhibitive effects of elastase and collagenase inhibition effects were measured as 30% and 47.2%, respectively, at a 1,000 ㎍/ml concentration. To determine the effect of Punica granatum L. extract on the proliferation of fibroblasts (CCD-986sk), cell viability was measured using a 3-[4,5-dimethyl-thiazol-2-yl]-2,5-diphenyl-tetrazoliumbromide (MTT) assay. As a result, survival rates of 130% or higher at a 500 ㎍/ml concentration or less were confirmed. According to the results of Western blot with Punica granatum L. extract, the expression inhibition rates of matrix metalloproteinase-1 (MMP-1), matrix metalloproteinase-2 (MMP-2), and matrix metalloproteinase-3 (MMP-3) were decreased by 23.2%, 81.9%, and 69.2%, respectively, at a 100 ㎍/ml concentration. Based on the results above, O/W liquid crystal cream with 0.1% Punica granatum L. extract was prepared. The stabilities were tested at 4, 25, 45, and 50℃. By checking the pH, change over time, and stability by temperature, it was confirmed that all were stable for one month. Thus, Punica granatum L. extract shows potential as a natural material for cosmetics.

• New Physics: Sae Mulli
• /
• v.68 no.12
• /
• pp.1302-1307
• /
• 2018

The crystallographic, electrical and magnetic behaviors of magnetite powder in the vicinity of its Verwey transition were investigated in this study. Magnetite was prepared by synthesizing a nanoparticle precursor and then annealing it at $800^{\circ}C$ for 1 h under a dynamic vacuum. Crystallographic and morphology analyses were done by using scanning electron microscope (SEM) and X-ray diffraction (XRD). The electrical and the magnetic properties were examined by using $M{\ddot{o}}ssbauer$ spectroscopy, vibrating sample magnetometer (VSM) and resistivity measurement. Both the magnetic moment and the resistivity showed discontinuous changes at the Verwey transition temperature ($T_V$). The temperature dependence of magnetic anisotropy constant showed a monotonic decrease with increasing temperature, with slight dip near $T_V$. $M{\ddot{o}}ssbauer$ spectra showed the superposition of two sextets, one from the tetrahedral (A) and the other from the octahedral (B) sites. The results revealed that identical charge states existed in the B site at temperatures both above and below $T_V$. A coordination crossover resulted in a transition from an inverse to a normal spinel at or close to $T_V$.

• (The)Study of the Eastern Classic
• /
• no.62
• /
• pp.263-289
• /
• 2016

Confucius, whose life coincided with the Warring States period of China, is one of the most respected sages in world history whose teachings and life produced countless disciples in China, Korea, and Japan. There are innumerable pictures, sculptures, and other artworks that portray memorable deeds of Confucius and interesting anecdotes that involve his pupils. One of the most popular subjects for these Confucian portrayals is the anecdote in which Confucius and his pupil, Zhi Ru, discover a tilting vessel at an ancestral shrine in the Lu dynasty and use it to understand the doctrine of the mean. The vessel becomes the basis for the famous Chinese expression, "the cautionary vessel beside one's seat," which is nowadays used to denote one's motto for life. Portraits of these tilting vessels can be divided between those showing the vessels only and others that show Confucius observing the vessels. The former serve as visual reminders, for rulers and policy makers, of the doctrine of the mean that is necessary to fair and righteous governance. The latter form part of the pictorial biography of Confucius with educational content and messages. Interestingly, portraits of Confucius observing or studying tilting vessels have been famous among members of the royal court and the literati, circulated either as single artworks or included in the folding screens of human portraits. Portrayals of other Confucian anecdotes are mostly found in albums that visualize the genealogy of the Way; in contrast, the portraits of Confucius and the tilting vessels were included in folding screens that were popular among the literati that enjoyed stylish works of art and antiques. The portraits of tilting vessels thus highlight the diverse functions and symbolic value of human portraits. This study classifies the portraits of tilting vessels into various forms, and analyzes the period-and objective-dependent changes and characteristics in these portraits. With its exploration of the diverse functions and aspects of portraits of Confucian anecdotes, this study will shed new light on how ancient artists reanimated the lives of great sages and how these artworks differ in their expressions and styles.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.4
• /
• pp.299-314
• /
• 2021

In this study, we investigated the effect of temperature on specific surface area and electrochemical properties when lignin-based porous carbon (LBPC) with potassium hydroxide (KOH) is activated. After preparing LBPCs using lignin-polyacrylonitrile (PAN) copolymer, which was synthesized by graft polymerizing lignin and acrylonitrile as a precursor, activated LBPCs (KA-LBPC-6, 7, 8, 9) were manufactured by activating LBPC with KOH at 600℃, 700℃, 800℃ and 900℃. To identify the surface characteristics of KA-LBPC, observations were made with a scanning electron microscopy (SEM), and the pore characteristics were identified via specific surface area analysis. The electrochemical properties were analyzed using a three-electrode system. The experiment has shown that micropores formed by activation can be observed in SEM images. KA-LBPC-7 had the best pore characteristics among KA-LBPCs, with a specific surface area of 2480.1 m²/g, a micropore volume of 0.64 cm³/g, and a mesopore volume of 0.76 cm³/g. KA-LBPC-7 showed the best electrochemical properties with a specific capacitance of 151.3 F/g at the scan rate of 2 mV/s.

• Clean Technology
• /
• v.27 no.2
• /
• pp.132-138
• /
• 2021

Research is being conducted on graphene to provide graphene having both excellent physical as well as electrical properties in addition to unique physical properties. In this study, Hummer's method, which is a representative method for chemical exfoliation, was applied in order to investigate the possibility of the mass production of high-quality graphene oxide. Three types of graphite (graphite, crystalline graphite, and expanded graphite) were used in the preparation of graphene oxide with variations in the amount of potassium permanganate added, reaction temperature, and reaction time. Then a Fourier transform infrared spectroscopy (FT-IR), a Raman spectrometer, and a transmission electron microscope (TEM) were used to measure the quality of the prepared graphene oxide. Of the three types of graphite used in this experiment, crystalline graphite showed the highest quality. The prepared graphene oxide was then purified with an organic solvent, and an analysis conducted using energy dispersive X-ray spectroscopy (EDS). From the results of the residual values, we were able to confirm that both acid wastewater and wastewater were best purified using cyclohexane. The method for manufacturing graphene oxide as well as the method of purification using organic solvents that are presented in this study are expected to have less of an environmental impact, making them environmentally friendly. This makes them suitable for use in various industrial fields such as the film industry and for heat dissipation and as coating agents.