• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.6
• /
• pp.635-644
• /
• 2016

Train speed control is a vital part of train protection to build safe movement at an operation track. There is a special condition of track that needs more attention to protect the train, for example in slope area. Moreover, in developing country with vandalism problem, it requires to install minimalized equipment on the trackside. In addition, in tropical country, on tracksides it will be potentially pooling water that influences to the performance of trackside equipment. To address these problems, we propose the train speed control for slope area using infrared system. By installing on the pole configuration, the system offers a less challenging, economically sensible, minimalized installation of equipment on the trackside and reliability for heavy rain environment. This paper concentrates on the controlling train speed and measurement performance evaluation in slope area. The proposed train speed control system can monitor and control the speed in sloping area with maximum 3.6% and controlled speed about 20 km per h.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.913-916
• /
• 2020

In this paper, we propose the development of nitrogen cooling equipment for personalized local area. The proposed equipment consists of a cold air supply module, a body, and nitrogen injection with the following characteristics. First, it automatically controls the amount and time of cold air supply by utilizing information measuring skin temperature with volumetric temperature sensors, so it can have a competitive edge in function by ensuring complete safety. Second, if the distance measuring sensor is applied to the skin for more than a certain distance, it can block the cold air or control the discharge of nitrogen in conjunction with the control GUI to improve the efficiency of higher cooling therapy while providing safe management. Third, by installing a control module that can control the supply of nitrogen, the cost of maintenance can be minimized by minimizing the loss of nitrogen. Experiments at an external testing agency to evaluate the performance of the proposed equipment showed that the accuracy of the temperature sensor was measured in the range of ±3.8%, which is lower than the world's highest level(±5%), with a range of 110℃ to -160℃ similar to the world's highest level. Distance accuracy was measured in the range of ±3.0%, lower than the world's highest level(±5%), and weight accuracy in the range of ±0.1%, lower than the world's highest level(±5%). In addition, emission control was measured in four stages, higher than the world's highest level(stage 1) and nitrogen use was measured at 0.8L/min below the world's highest(6L/min). Therefore, the effectiveness of the methods proposed in this paper was demonstrated because they produced the same results as the world's highest levels.

• Journal of IKEEE
• /
• v.17 no.4
• /
• pp.499-504
• /
• 2013

Automation is being progressed rapidly in various fields with the advancement of IT technology. Home automation is a typical application and is being used in a variety of ways now. Most of digital door lock systems simply support to open and close a door using the methods of password and a particular magnetic key. In this paper, we propose a intelligent digital door lock system using face recognition technology. Our proposed system can control the locking device opening and closing from a remote location after confirming the identification of the visitor via a smart device, and support the reliable and secure control of door systems.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.6
• /
• pp.93-102
• /
• 2010

Existing web based information service system solutions show limitations in mobile information services, as well as problems such as uncertain error messages, and difficulty providing swift assistance or real time emergency support. In order to solve these deficiencies, a realtime wireless remote control system has been designed and implemented in this thesis, which is capable of managing and monitoring remote systems using mobile communication devices (Mobile Phone, PDA, Smart Phone) for realtime control. Proposed systems are applied at remote places, for instance 'office building', and a nursery school like 'kindergarten'. In the case of implemented at office building, it can be managing and controlling at real time all sorts of the sensor information that are installed at office building system environment through wire(web environment) or wireless(mobile device). In the other case at kindergarten system that are providing the real-time wireless remote control and monitoring system can be monitoring activity of kindergarten children with a mobile phone of authentication user. The security functions of proposed systems include mobile device user authentication and target system access control. The proposed systems allow real-time user authentication function and system access control function that improve the security of resource administrators and mobile device users, and provides not only uninterrupted services, but also real time mobile service environments.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1221-1226
• /
• 2019

The importance of livestock production of agriculture in Korea is very large. Investments in sanitation facilities and environmental factors such as animal health and odor have been relatively crude, and over the past few years animal disease has emerged as the leading cause of domestic livestock farmers' income stability. There is a need for an access control system that can be purchased and installed by small and medium-sized farmers who are suffering from pollutants and small farmers who can not afford to install costly sterilization on an economical basis. In this paper, based on the plasma access control system proposed previously, we developed an ICT surveillance access control prototype system that can ensure safety and security through access control and integrated control system that introduces a sterilization system using plasma required by farmers affected by pollutants.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.2
• /
• pp.160-167
• /
• 2009

To detect islanding mode when the grid is being tripped is a major safety issue in the Utility Interactive Photo Voltaic (UIPV) system. In this paper, analytical design method is suggested for AFD & RPV method under IEEE 929-2000 recommended islanding test condition. We have discussed that there is a same point. we injected reactive component of the current by AFD & RPV methods, but the current reference generated is other waveform. Possible if amount of reactive components in this methods are same each method, there is happened same rates frequency variation. To verify the validity of the analytical comparison, this paper presents simulation and experimental results from single phase, 3[kW] inverter for the transformerless UIPV system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.6
• /
• pp.539-544
• /
• 2020

The research is on progressing to operate digital door lock with the method to guarantee the security and safety in the meantime to use digital door lock conveniently using Internet of Things (IoT) standardizing various service providing technology using IoT in home network currently. In this study, compose home network interconnecting Raspberry-PI and web server reflection this trend and composed the system to control the door lock after connect Arduino substituting converter function. Making Raspberry-PI using dynamic IP address using existing open source easily maintain DNS information and possible to connect internet network in home network ethernet and finally, making the smartphone can control door lock remotely entering designated address after connect the internet. The connection between home network and Arduino is executed by Raspberry-PI and bluetooth pairing as 1:1 and make random user's access to be impossible. Especially, to make open/close the door lock with smartphone not by using password on the keypad or using RFID card is judged as the method increasing the security make random user's access to be impossible and also increased the usefulness making remote control to be possible.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.537-538
• /
• 2015

최근 자전거의 활용범위가 출퇴근뿐만 아니라, 친환경 헬스케어 부각으로 자전거 타는 것에 많이 이용되고 있는 실정이다. 근래 몇 년 사이에 정부에서도 자전거 전용도로를 도시외각뿐만 아니라 자전거로 출퇴근 이용자들을 위해 안전하게 운행할 수 있도록 자전거 전용도로를 전국에 확대설치 하여 자전거 보급을 확대 하고 있다. 하지만 현재 국내에 많이 보급되어 있는 자전거는 대부분이 외국에서 반제품이 수입되어 국내에서 완제품으로 조림하여 판매되는 제품들이 주를 이루고 있으며, 자전거 부품 중에도 최근 외국에서 개발이 진행되고 있는 전자변속기 또한 외국의 기술들이 도입되어 제품들이 출시되고 있는 실정이다. 이에 외국의 기술적 우위로 인하여 한국의 자전거 산업발전에 어려움이 많은 것이 현실이다. 본 연구에서는 리니어모터를 이용하여 디지털 전동 변속기를 개발 하여, 변속의 신속성, 정확성을 확보하면서, 동시에 외국의 기술적 장벽을 넘고자 한다. 현행 자전거 뒤 변속기의 정확한 변위위치 확보하기 위하여 자전거 핸들에 장착되어 있는 변속레버를 디지털화 하여, 변속을 제어하게 되면 뒤쪽에 설치되어 있는 리니어모터를 위치 제어함으로써 가이드 샤프트 피치에 의하여 변속위치가 정밀하게 제어 할 수 있는 전동 변속기 제어시스템을 제안하고자 한다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.3
• /
• pp.3-8
• /
• 2008

Ephemeral data are easily revealed if state specific information is stored in insecure memory or a random number generator is corrupted. In this letter, we show that Nam et al.'s group key agreement scheme, which is an improvement of Bresson et al.'s scheme, is not secure against session-state reveal attacks. We then propose an improvement to fix the security flaw.

• Journal of Aerospace System Engineering
• /
• v.12 no.4
• /
• pp.98-105
• /
• 2018

The satellite is exposed to various launch environments such as random vibrations and shock. Accordingly, structural design of electronic equipment mounted on satellite must meet reliability requirements at the box level. In addition, it is essential to secure the reliability of the solder joint applied to electronic equipment. In this paper, we performed a modal and quasi-static analysis for the purpose of satisfaction of the design requirements of the CCB (Camera Controller Box) present on the 500 kg-class compact advanced satellite (CAS500). In addition, structural safety of electronic components was verified by the Steinberg's method and random equivalent static analysis.