• Title/Summary/Keyword: 전자 분광 화학분석법

Search Result 162, Processing Time 0.026 seconds

형태변환형 투명 전극에 적용 가능한 그래핀-ITO 적층 필름 형성 및 특성 평가에 관한 연구

  • Kim, Jang-A;Kulkarni, Atul;Hwang, Tae-Hyeon;Kim, Tae-Seong
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2012.02a
    • /
    • pp.199-199
    • /
    • 2012
  • 최근 그래핀의 대면적 합성 및 롤투롤 전사 공정의 개발로 그래핀의 상용화가 가시화 되고 있다. 하지만, 그래핀의 독특한 특성인 선형적이고 밴드갭이 없는 에너지 띠 분포 때문에 반도체 소자로서의 직접적인 적용에는 한계가 있다. 이러한 문제를 해결하기 위한 돌파구로써, 그래핀 복합체의 연구와 개발이 활발히 진행되고 있으며 본 연구에서는 그래핀 복합 적층 구조를 다룬다. 이는 디스플레이, 초고속 반도체 소자, 고성능 광전자소자 및 초고감도 센서 등 다양한 분야에 대한 그래핀의 실용화 가능성이 높아진 것을 의미한다. 특히, 높은 가시광 투과도와 낮은 면저항으로 기존 투명 전극에 대표적으로 사용되고 있는 ITO (Indium Tin Oxide)를 그래핀으로 대체하는 것에 관한 연구가 활발히 진행되고 있다. 하지만 그래핀이 높은 전자이동도를 가지는 것에 비하여 비저항과 투과도 측면에 있어서는 ITO의 성능을 뛰어넘지 못하는 실정이다. 따라서 본 연구에서는 ITO가 가지는 취약점인 기판과의 약한 접착력, 높은 취성, 기판과의 열팽창률 차이 등의 공정상 문제점을 극복하고자 하였다. 그래핀 복합 적층 필름은 플라스틱 기판 (PET) 위에 열 화학기상증착법(Chemical Vapor Deposition, CVD)을 이용하여 합성한 그래핀을 전사하고, ITO 용액을 도포한 다음 다시 그래핀을 씌워 제작하여 샌드위치 구조(sandwich structure)를 형성하였다. 완성된 필름은 광학적, 전기적 특성 분석을 수행하였다. 광학적 분석으로는 라만 분광을 이용한 그래핀 품질평가와 파장대에 따른 광 투과도, 그리고 반사도 측정을 하였으며, 전기적 특성은 면저항을 측정함으로써 분석한다. 결함이 적고, 대면적에 걸쳐 한 층을 이루어야 하는 고품질 그래핀의 요구사항에 따라 라만 분광의 G, 2D, D 띠를 분석하였다. G와 2D 띠의 비율을 통해 그래핀의 층 수를, D 띠의 강도를 통해 결함의 유무를 판단하였다. 또한, 가시광 영역에서 90% 이상의 광 투과도를 보여야 하는 투명 소자의 요구사항 달성 정도를 UV-VIS를 이용하여 확인하였다. 마지막으로, 제작한 필름의 면저항 또한 4-프로브 멀티미터를 이용하여 측정하고, 일반적인 터치스크린의 면저항인 $500{\Omega}/sq$를 만족하는지 평가하였다.

  • PDF

The Effect of Crystallinity on the Photoluminescence of TiO2 Nanoparticles (결정성에 따른 TiO2 나노입자의 포토루미네선스 영향)

  • Han, Wooje;Park, Hyung-Ho
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.26 no.1
    • /
    • pp.23-28
    • /
    • 2019
  • The Titanium oxide ($TiO_2$) is an attractive ceramic material which shows non-toxic, high refractive index, catalytic activity and biocompatibility, and can be fabricated at a low cost due to its high chemical stability and large anisotropy. $TiO_2$ nanoparticles have been prepared by sol-gel method. The pH of solution can affect the $TiO_2$ crystallinity during the formation of nanoparticles. The prepared nanoparticles were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction, photoluminescence spectroscopy in order to investigate their structural and photoluminescence properties. Through these analysis, the size of $TiO_2$ nanoparticles were found to be smaller than 5 nm. As the crystallinity of the nanoparticles increased, the emission of PL in the 550 nm region increased. Therefore, luminescence characteristics can be improved by controlling the crystallinity of the $TiO_2$ nanoparticles.

Micromorphology and Chemical Composition of a Sialolith in the Submandibular Gland Duct (악하선 내 타석의 미세형상 및 화학적 조성)

  • Im, Yeong-Gwan;Song, Ho-Jun;Kim, Byung-Gook
    • Journal of Oral Medicine and Pain
    • /
    • v.36 no.3
    • /
    • pp.161-167
    • /
    • 2011
  • Sialolith is one of the most common pathologic conditions found in the salivary glands. The mechanisms responsible for the formation of sialoliths have not been elucidated so far. In this article, the chemical composition and micromorphology of a sialolith of a 58-year old female patient suffering from chronic sialoadenitis of the submandibular gland was analyzed using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). In a SEM evaluation, the highly mineralized amorphous core surrounded by lamellar and concentric structures was revealed, however no foreign body, organic material, or signs of microorganism were observed in the core of the sialolith. EDX analysis showed the central core was composed of only Ca, O and P, and that a high level of C was detected near the central area as well. These results indicated that the inorganic composition of the sialolith was hydroxyapatite crystals, and that inorganic and organic substances existed around the central cores. This study suggests that the sialolith was composed mainly of hydroxyapatite crystals and the formation of the nucleus of the sialolith in the submandibular gland duct was secondary to sialadenitis, which favors the growth of an inorganic crystalline nucleus.

He-SiH4혼합가스를 이용하여 RF-PECVD에 의해 증착된 수소화된 나노결정질 실리콘 박막의 재료적 특성에 관한 연구

  • Kim, In-Gyo;Jeong, Ho-Beom;Im, Jong-Hyeok;Kim, Gyeong-Nam;Yeom, Geun-Yeong
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2011.02a
    • /
    • pp.170-170
    • /
    • 2011
  • 태양전지와 박막 트랜지스터를 위한 유망한 재료로서 수소화된 비정질 실리콘과 나노결정 실리콘 박막이 관심을 받아 왔다. 특히, 수소화된 나노결정 실리콘 박막은 비정질 대비 높은 방향성과 조밀한 구조 덕에 박막 태양전지나 TFT(Thin film transistor) 소자의 성능 향상에 기여할 수 있는 물질로 연구되고 있다. 이러한 박막들은 보통 $SiH_4$같은 Si을 포함한 가스에 다량의 $H_2$를 희석시켜 플라즈마 화학 증착법(PECVD, Plasma Enhanced Chemical Vapor Deposition)에 의해 성장된다. 이러한 CVD증착 방식을 이용하여 결정화된 박막을 얻기 위해서는 대개 높은 수소 희석비를 이용하는 것이 일반적이나, 이러한 공정 방식은 실리콘이 결합되어야 할 결합위치에 bonding energy가 더 높은 수소의 결합을 촉진하게 된다. 이러한 특성은 박막 태양전지에서 효율을 떨어뜨리는 주요 요소로 작용하고 있다.(1) 본 연구에서는 수소의 결합 확률을 낮춘 결정화된 박막을 성장시키기 위해 수소를 대신하여 헬륨을 희석가스로 사용하여 박막을 증착하고 그 특성을 분석해 보았다. 박막의 구조적 특성, 결정화도(Xc), 플라즈마 내 활성 라디칼(Active radical in plasma), Si-H결합 특성, 전도도(Conductivity)와 같은 박막 특성을 알아보기 위해 주사전자현미경(SEM, Scanning Electron Microscopy), 라만 분광기(Raman spectroscopy), 광 방출 분광기(OES, Optical Emission Spectrocopy), 적외선 분광기(FT-IR, Fourier Transform-Infrared Spectroscopy), Keithley measurement kit이 사용되었다. 수소를 대신하여 헬륨을 사용함으로써 동일 결정화도 대비 10%이상 낮은 microstructure factor 값을 얻을 수 있었으며 인가되는 RF 전력을 140W까지 증가시켰을 때 약 80%의 결정화도를 관찰할 수 있었다.

  • PDF

Structural and optical properties of Si nanowires grown with island-catalyzed Au-Si by rapid thermal chemical vapor deposition(RTCVD) (Au-Si을 촉매로 급속화학기상증착법으로 성장한 Si 나노선의 구조 및 광학적 특성 연구)

  • Kwak, D.W.;Lee, Y.H.
    • Journal of the Korean Vacuum Society
    • /
    • v.16 no.4
    • /
    • pp.279-285
    • /
    • 2007
  • We have demonstrated structural evolution and optical properties of the Si-NWs on Si (111) substrates with synthesized nanoscale Au-Si islands by rapid thermal chemical vapor deposition(RTCVD). Au nano-islands (10-50nm in diameter) were employed as a liquid-droplet catalysis to grow Si-NWs via vapor-liquid-solid mechanism. Si-NWs were grown by a mixture gas of $SiH_4\;and\;H_2$ at pressures of $0.1{\sim}1.0$Torr and temperatures of $450{\sim}650^{\circ}C$. SEM measurements showed the formation of Si-NWs well-aligned vertically for Si (111) surfaces. The resulting NWs are 30-100nm in diameter and $0.4{\sim}12um$ in length depending on growth conditions. HR-TEM measurements indicated that Si-NWs are single crystals convered with about 3nm thick layers of amorphous oxide. In addition, optical properties of NWs were investigated by micro-Raman spectroscopy. The downshift and asymmetric broadening of the Si optical phonon peak with a shoulder at $480cm^{-1}$ were observed in Raman spectra of Si-NWs.

Formation of New Thorium (IV) Complexes with Crown Ethers (새로운 Thorium (IV)-Crown Ether 착물형성)

  • Jung, Hak-Jin;Jung, Oh-Jin;Suh, Hyouck-Choon
    • Journal of the Korean Chemical Society
    • /
    • v.31 no.3
    • /
    • pp.258-270
    • /
    • 1987
  • A series of new thorium nitrate complexes with crown ethers have been synthesized from the reaction of the hydrated thorium nitrate, with the appropriate crown ethers of different cavity sizes in various solvents such as methanol, ethanol, butanol, methylacetate, acetone, tetrahydrofuran and acetylacetone. CHN elemental analysis, ICPAS, thermal analysis and Karl-Fischer method have been used to characterize their compositions, and the spectroscopic methods of IR, UV, $^1H-NMR$, and X-ray diffraction have been employed to determine the structures and solvolysis phenomena of these complexes. and the electrical conductances were measured in DMSO, and water solvent. The solvolysis have been observed only in the complexes synthesized in acetylacetone solvent. In the solvated complexes of 15-crown-5 and 18-crown-6, the mole ratio of $Th^{4+}$: ligand : acetylacetone is found to be 1:1:1, but in the non-solvated complexes of 12-crown-4 and 15-crown-5, the mole ratios of Th:L are 1:2 and 2:3, respectively, and that in the complexes of both 18-crown-6 and dicyclohexano-18-crown-6 is 1:1. All complexes which were not solvated have shown $n{\to}{\sigma}^{\ast}$ electronic transitions of crown ether whereas complexes solvated have exhibited both $n{\to}{\sigma}^{\ast}$ of crown ether and $n{\to}{\pi}^{\ast}$ transitions of acac. The dissociation mole ratio of $Th^{4+}$ and nitrate ion is found to be 1:1 in aprotic solvent, and 1:4 in protic solvent like water.

  • PDF

Cobalt(III) Complex of Ethylenediamine-N,N'-di-${\alpha}$-Isobutyric Acid (Ethylenediamine-N,N'-di-${\alpha}$-Isobutyric Acid의 코발트(III) 착물)

  • Moo-Jin Jun;Chang-Yoon Han;Chang-Woo Park;Sung Rack Choi;Kwang-Ha Park
    • Journal of the Korean Chemical Society
    • /
    • v.30 no.1
    • /
    • pp.84-89
    • /
    • 1986
  • A newflexible $N_2O_2$-type tetradentate ligand. Ethylenediamine-N,N'-di-${\alpha}$-isobutyric acid(eddib), has been synthesized, and dichloro cobalt(III) complex of eddib has been prepared via the air-oxidation technique. Only S-cis isomer has been yielded during the preparation of complex. Ring strain and steric hinderance are cited as the cause for the preference for the S-cis geometric configuration. On series of cobalt(III) complexes of eddib, $[Co(eddib)L]^{n+}$ $(L = Cl{\cdot}(H_2O),\;CO_3^{2-},\;(H_2O)_2)$have been prepared in situ. In their electronic absorption spectra, the absorption maxima and their intensities of the above series of complexes are on the ordinary line of the spectrochemical and hyperchromic series. Elemental analysis, IR, NMR and electronic absorption spectra have been used to characterize the complex and geometries of the complex.

  • PDF

Effect of Ni Addition on ATiO3 (A = Ca, Sr, Ba) Perovskite Photocatalyst for Hydrogen Production from Methanol Photolysis (메탄올 광분해 수소제조를 위한 ATiO3 (A = Ca, Sr, Ba) Perovskite 광촉매의 Ni 첨가 영향)

  • Kwak, Byeong Sub;Park, No-Kuk;Lee, Tae Jin;Lee, Sang Tae;Kang, Misook
    • Clean Technology
    • /
    • v.23 no.1
    • /
    • pp.95-103
    • /
    • 2017
  • In this study, $ATiO_3$ (A = Ca, Sr, Ba) perovskite, which is the widely known for non $TiO_2$ photocatalysts, were synthesized using sol-gel method. And Ni was added at the A site of $ATiO_3$ by using that it is easy to incorporate. The physicochemical characteristics of the obtained $ATiO_3$ and Ni-$ATiO_3$ particles were confirmed using the X-ray diffraction (XRD) UV-visible spectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), the $N_2$ adsorption-desorption isotherm measurement, and X-ray photoelectron spectroscopy (XPS). The $H_2$ was produced using the photolysis of MeOH. Using the Ni-$ATiO_3$ photocatalysts, $H_2$ production was higher than using the $ATiO_3$ photocatalysts. Especially, $273.84mmolg^{-1}$ $H_2$ was produced after 24 h reaction over the Ni-$SrTiO_3$. Also in the water (0.1 M KOH) with the Ni-$SrTiO_3$, $H_2$ production was $961.51mmolg^{-1}$ after 24 h reaction.

Synthesis of Tridentate-Schiff Base Co(II) Complexes and Their Electrochemical Properties (세자리 Schiff Base Co(Ⅱ) 착물의 합성과 전기화학적 성질)

  • Chae, Hui Nam;Choe, Yong Guk
    • Journal of the Korean Chemical Society
    • /
    • v.42 no.4
    • /
    • pp.422-431
    • /
    • 1998
  • Tridentate Schiff base ligands such as $SIPH_2,\;SIPCH_2,\;HNIPH_2,\;and\; HNIPCH_2$ were prepared by the reaction of salicylaldehyde and 2-hydroxy-l-naphthaldehyde with 2-aminophenol and 2-amino-p-cresol. The structures and properties of ligands and their Co(II) complexes were investigated by elemental analysis, $^1H$NMR, IR, UV-visible spectra, and thermogravimetric analysis. The molar ratio of Schiff base to the metal of complexes was found to be 1:1. Co(II) complexes were contemplated to be hexa-coordinated octahedral configuration containing three water molecules. The redox process of ligands and complexes in DMSO solution containing 0.1 M TBAP as a supporting electrolyte were investigated by cyclic voltammetry with glassy carbon electrode. The redox process of the tridentate Schiff base ligands was totally irreversible. The redox process of Co(II) complexes were irreversible and one electron processes by two steps in diffusion controlled reaction. The reduction potential of the Co(II) complexes was shifted to the positive direction in the order [Co(Ⅱ)$(HNIPC)(H_2O)_3$]>[Co(Ⅱ)$(HNIP)(H_2O)_3$]>[Co(II)$(SIPC)(H_2O)_3$]>[Co(Ⅱ)$(SIP)(H_2O)_3], and their dependence on ligands were not so high.

  • PDF

Raman Spectroscopy Analysis of Graphene Films Grown on Ni (111) and (100) Surface (니켈 (111)과 (100) 결정면에서 성장한 그래핀에 대한 라만 스펙트럼 분석)

  • Jung, Daesung;Jeon, Cheolho;Song, Wooseok;An, Ki-Seok;Park, Chong-Yun
    • Composites Research
    • /
    • v.29 no.4
    • /
    • pp.194-202
    • /
    • 2016
  • A graphene film, two-dimensional carbon sheet, is a promising material for future electronic devices and so on. In graphene applications, the effect of substrate on the atomic/electronic structures of graphene is significant, so we studied an interaction between graphene film and substrate. To study the effect, we investigated the graphene films grown on Ni substrate with two crystal face of (111) and (100) by Raman spectroscopy, comparing with graphene films transferred on $SiO_2/Si$ substrate. In our study, the doping effect caused by charge transfer from Ni or $SiO_2/Si$ substrate to graphene was not observed. The bonding force between graphene and Ni substrate is stronger than that between graphene and $SiO_2/Si$. The graphene films grown on Ni substrate showed compressive strain and the growth of graphene films is incommensurate with Ni (100) lattice. The position of 2D band of graphene synthesized on Ni (111) and (100) substrate was different, and this result will be studied in the near future.