• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.1
• /
• pp.21-28
• /
• 2005

This study tries to analyzes the torque and engaging time generated in a micro-electromagnetic clutch by using FEM. For the purpose of design change and optimization of the micro-electromagnetic clutch, the torque prediction is very important. We employ a mathematical approach based on the electromagnetic principle. For torque prediction, real material properties are substituted to the constructed axi-symmetric FEM model to obtain the analytical torque and engaging time. The predicted torque and engaging time are compared with those obtained by experiments to discuss the validity of torque and engaging time analysis. The analytical results agrees well with experimental data, therefore explaining the validity of the torque and engaging time prediction method.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.10a
• /
• pp.415.1-415
• /
• 2002

• Proceedings of the Korean Magnestics Society Conference
• /
• 2011.12a
• /
• pp.62-63
• /
• 2011

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.12
• /
• pp.79-84
• /
• 2007

This paper presents an improved field uniformity in a reverberation chamber, that can be alternatively used for the analysis and the measurement of electromagnetic interference and immunity, with a designed CRD(Cubical Residue Diffuser) that have various dimensions. The Schroeder type CRD is designed for $1\sim3$ GHz band and the FDTD(Finite Difference Time Domain) method is used to analyze the field characteristics. At 2 GHz, the standard deviation of test volume in the reverberation chamber is the smallest and has a good field distribution with a CRD of $40\sim80%$ dimension of one side of the reverberation chamber. The Electric field uniformity gets worse when the dimension of a CRD is either below 40 % or above 80 % of the side wall. The result shows that the standard deviation of the test volume in the reverberation chamber with a CRD of 44 % dimension is improved by 1 dB compared with that of the reverberation chamber with a CRD of 100 % dimension.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.98-100
• /
• 2003

Cable접속장치인 정격 25.8kV 600/1200A Plug-in socket의 절연설계, 전계분포해석 및 열계해석을 위하여 전자계 및 열해석 프로그램인 FLUX2D 및 3D를 사용하여 simulation하였다. 전계해석은 plug-in 접속장치의 절연물, shield영향, 각종금구의 연면 전계강도를 계산하여 기준 전계와 비교 검토 하였다. 해석결과 shield의 위치와 형상이 최고 전계강도를 완화시키는데 중요한 역할을 하고 있으며, 각종 금구류의 형상 설계도 전계강도를 결정하는 요인이 되었다.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.347-349
• /
• 2001

본 논문에서는 극저주파 전자계 장해의 공학적 평가에 있어 기본이 되는 송전선 주변의 3차원 자기장 예측기법에 대하여 기술하였다. 송전선 주변의 무한영역 극저주파 자기장 계산을 위해서는 Biot-Savart's law에 의한 3차원 자기장 해석방법을 사용하였으며 교류자계 벡터의 중요한 파라미터인 elliptical polarized 특성에 대하여도 고찰하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.8
• /
• pp.121-127
• /
• 2008

This paper presents an electric field distribution in a reverberation chamber using cylindrical diffuser. The characteristics of electric field distributions are compared with QRD(Quadratic Residue Diffuser) and cylindrical diffuser for $1{\sim}3$ GHz frequency band. The FDTD(Finite-Difference Time-Domain) method is used to analyze the field characteristics, and the field uniformity. At 2 GHz, the standard deviation and the tolerance of test volume in the reverberation chamber are improved by 0.11 dB, 0.43 dB for the case of cylindrical diffuser. The field strength is increased by 43.2 dBmV/m vs QRD's of 36.6 dBmV/m. Comparing with QRD's, the characteristic of polarization is also improved. These results show that reverberation chamber using cylindrical diffuser can be used alternative facility for measurement of electromagnetic interference and immunity.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.1
• /
• pp.59-64
• /
• 2002

A FEM model of the remote-field eddy current effect is presented for zirconium-2.5 percent niobium(Zr-2.5%Nb) nuclear reactor pressure tubes to demonstrate the important electromagnetic field phenomena. This model is applied to evaluate the optimal operating frequency and detector position. There are many ambiguous experimental results connected with this technique. Finite element calculations can be used in the interpretation of these experimental results even though the electromagnetic fields measured in the remote-field technique are very small.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.60-67
• /
• 2008

In this paper we consider an application of the method of electromagnetic (EM) migration to the interpretation of a typical marine controlled-source (MCSEM) survey consisting of a set of sea-bottom receivers and a moving electrical bipole transmitter. Three-dimensional interpretation of MCSEM data is a very challenging problem because of the enormous number of computations required in the case of the multi-transmitter and multi-receiver data acquisition systems used in these surveys. At the same time, we demonstrate that the MCSEM surveys with their dense system of transmitters and receivers are extremely well suited for application of the migration method. In order to speed up the computation of the migration field, we apply a fast form of integral equation (IE) solution based on the multigrid quasi-linear (MGQL) approximation which we have developed. The principles of migration imaging formulated in this paper are tested on a typical model of a sea-bottom petroleum reservoir.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.1
• /
• pp.38-43
• /
• 1993

A Hybrid Finite Element Method(HFEM) is applied to solve the electrormagnetic scattering from multi-layered dielectric cylinders. An unbounde region is divided into local boundary regions where a practical differential equation solution is obtained, with the remaining unbounded region represented by a boundary integral equation. If sources, media inhomogeneities, and anisotropies are local, a surgace may be defined to enclose them. Therefore the integral region so defined is bounded, and differential techniques may be used there. Also, in the re- maining unbounded region a boundary integral equation may be formulated using only a simple free - space green's function. Therefore, The local boundary is represented by a boundary - value problem with boundary conditions and solved by the finite element method. The advantage of the proposed method is simple and efficient in the work of electromagnetic scattering. The validity of the results have been verified by comparing results of other method(boundary element method). Examples has been presented to calculate the scattered fields of lossy dielectric cylinders of arbitray cross section.