• Electronics and Telecommunications Trends
• /
• v.34 no.5
• /
• pp.1-13
• /
• 2019

In modern times, X-ray imaging has become a necessary tool for early diagnosis, quality control, nondestructive testing, and security screening. X-ray imaging equipment generally comprises an X-ray generator and an image sensor. Most commercially available X-ray generators employ filament-thermionic electron-based X-ray tubes, thus demonstrating typical analog behavior, such as slow response and large stray X-rays. Furthermore, digital X-ray sources, which have been studied extensively using field electron emitters manufactured from nanometer-scale materials, provide fast and accurately controlled ultra-shot X-rays. This could usher in a new era of X-ray imaging in medical diagnosis and nondestructive inspections. Specifically, digital X-ray sources, with reduced X-ray dose, can significantly improve the temporal and spatial resolution of fluoroscopy and computed tomography. Recently, digital X-ray tube technologies based on carbon nanotubes, developed by Electronics and Telecommunications Research Institute, have been transferred to several companies and commercialized for dental imaging for the first time.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.2
• /
• pp.116-121
• /
• 2019

Hexagonal boron nitride particles (s-hBN) modified with 3-aminopropyl triethoxysilane (APTES) were used for the preparation of silicone composite materials. The microstructure of the composite materials was observed, and the thermal conduction and mechanical characteristics of the composite sheets were studied based on the compositions and microstructures. When a small amount of s-hBN particles was used, the thermal conductivity of the composite improved as a whole, and the tensile strength of the sheet also increased. The thermal conductivity and tensile strength of the composite in which a small amount of carbon fiber was added along with s-hBN were further improved. However, the use of carbon nanotubes with structural characteristics similar to those of carbon fiber resulted in lower thermal conductivity and tensile strength. Elastic silicone composites exhibiting 2.5 W/mK of thermal conductivity and a low hardness are expected to be used as thermally conductive interfacial sheet materials.

• Journal of the Korean Magnetics Society
• /
• v.4 no.3
• /
• pp.214-218
• /
• 1994

$Y_{3}Fe_{5}O_{12}$ based garnet films(thin or thick) offer a great promise for the application of microwave communication components. We investigated the magnetic and crystallographic preperties of $Y_{3}Fe_{5}O_{12}$ thick films prepared by KrF eximer laser ablation of a stoichiometric garnet target. It was possible to obtain almost epitaxially oriented films on $Al_{2}O_{3}$(1102) plane. Although the crystalline quality depends on substrate temperature and $O_{2}$ partial pressure used($Po_{2}$), 4.1m thick films of $4{\pi}M_{s}=1300$ Gauss and $H_{c}=37.5$ Oe were obtained at the substrate temperature of $700^{\circ}C$ with the $Po_{2}$ of 100 mTorr after annealing the as-deposited films at $700^{\circ}C$ for 2 hours. These films are expected to be used for magnetostatic spin wave filters at narrow bandwidth frequency.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1155-1160
• /
• 2011

High-strength nickel-based super alloys have been widely used in aircraft engines, vessel engines, and turbine blades because of their high strength and excellent fatigue and oxidation resistance. In this study, tests were carried out to determine the total strain range and temperature for high-strength nickel-based super alloys. Prepared specimens of IN738LC were exposed to temperatures of $871^{\circ}C$ and $982^{\circ}C$ for 1,000.10,000 h. These specimens were subjected to tests of mechanical properties and microstructure observations. The changes in mechanical properties were related to changes in ${\gamma}$ according to the thermal exposure time.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.4
• /
• pp.159-168
• /
• 2012

The purpose of this study is to analyze the relationship of MOT and NPD performance in medium-sized manufacturing firms. To accomplish the purpose of the study, working hypotheses were established based on the literatures about the impacts of MOT factors on the NPD performance. The sample of this study is as follows : 12 electrical and electronics companies, 18 machine and engineering companies, 16 parts and materials companies. In order to verify hypotheses, the data were collected from team leader and manager of research center, R&D, and production department of these companies and the leader of R&D project team who all had experience in project or were participating in it in latest 3 years. The results of study were summarized as follows : First, in analysis on the reality of MOT factors in sample firms, will of top management level on the MOT was comparatively high but relatedness of business strategy and technology strategy, open R&D system, systematic time scheduling, management of R&D manpower, and developing and adapting PLM system were common level. Second, to improve NPD performance in medium-sized manufacturing firms, will of top management level on the MOT, relatedness of business strategy and technology strategy, open R&D system, systematic time scheduling, management of R&D manpower, and developing and adapting PLM system were intensively required.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.1
• /
• pp.90-94
• /
• 2023

Carbon fiber(CF) with excellent thermal conductivity and electrical conductivity is attracting attention as an alternative material because metal heating elements have problems such as high heat loss and fire risk. However, since CF is oxidized and disconnected at about 200℃ or higher, the application of heating elements is limited, and CF heating elements in the form of vacuum tubes are currently used in some commercial heaters. In this work, polyimide(PI) with high heat resistance was coated on the surface of carbon fiber by electrophoretic deposition to prevent oxidation of CF in the atmosphere without using a vacuum tube, and the coating thickness and heat resistance were investigated according to the applied voltage. The heater made by connecting the PI-coated CF heating elements in series showed stable heating characteristics up to 292℃, which was similar to the heating temperature result of the heat transfer simulation. The PI layer coated by the electrophoretic deposition method is effective in preventing oxidation of CF at 200℃ or higher and is expected to be applicable to various heating components such as secondary batteries, aerospace, and electric vehicles that require heat stability.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.4
• /
• pp.7-21
• /
• 2000

This paper describes an overview of the thixoforming and thixomolding processes. Semi-solid metalworking (SSM), which is called the thixoforming process of aluminium materials, incorporates the elements of both casting and for the manufacture of near net shape parts. The SSM has some advantages such as net shape or near net shape manufacturing, the ability to form thin walls, excellent surface finish, tight tolerance, and excellent dimensional precision. The thixomolding process of Mg alloy (AZ9l) is a combination of two technologies both conventional die casting and plastic injection molding. The feed material used is a machined chip with a geometry of approximately 1 mm square and a length of 2~3 mm. The semi-solid forming (SSF) of high quality aluminium and magnesium parts will be established in the automotive and electronic industry, in the future. The hybrid method of casting/forging has been caused attention. This process uses a preformed material made by casting instead of the wrought material and finishes it by a single forging process. This process is expected to lower costs without sacrificing the mechanical and finishes it by a single forging process. The process is expected to lower costs without sacrificing the mechanical properties. The authors, intending that the casting/forging process contributes to a reduction in production cost of aluminum automotive parts in Korea, describes the feature of the casting/forging process, aluminum alloys suitable for the cast preform, microstructure and mechanical properties of the cast preform, application examples of cast/forging, and further study.

• Proceedings of the Korean DIstribution Association Conference
• /
• 2006.08a
• /
• pp.47-68
• /
• 2006

This study aims to determine the association structure of the behavioral relationship variables, such as trust, commitment, cooperation, communication and coercive power, in the relationship between the buyers and suppliers of industrial parts. It also investigates the impact of the use of IT technologies on the relationships quality. Data was collected from 216 part suppliers of machinery, electronics and automobiles located in Incheon. Data supported all of the proposed hypotheses. First, it was confirmed that parts suppliers' trust in buyers leads to the commitment into relationships with buyers. Second, cooperation and communication showed a positive influence on parts suppliers' trust in buyers, and coercive power gave a negative influence on trust. Third, the use of IT technologies like Internet and E-Mail between parts suppliers and buyers was verified to have generally a positive influence on the quality of relationships. At the same time, cooperation and communication were confirmed to have a positive influence on each other, and cooperation and coercive power as well as communication and coercive power were confirmed to have negative influence on each other. This study is a pioneering attempt to examine the relationships between suppliers and buyers of industrial parts, and the influence IT technologies on the relationship quality. Also, the findings will be practically much helpful to find how to reinforce the relationships between parts suppliers and buyers.

• Mineral and Industry
• /
• v.16 no.1
• /
• pp.1-16
• /
• 2003

수천 년 전부터 인간생활에 이용되어온 일라이트-운모는 다른 광물자원에 비하여 사용량은 많지 않지만, 요업, 도료, 종이, 건축용 재료, 화장품 소재 및 전자부품과 전기 재료 등 여러 산업 분야에 널리 사용되고 있다. 일라이트-운모는 광물학적으로 같은 계열의 광물군임에도 불구하고 산출상태, 입도 및 용도의 차이에 따라 다른 광물자원으로 취급되고 있다. 특히 국내에서 일라이트는 용어상의 혼란과 불명확한 법정 등록광종 때문에 효율적인 자원관리와 연구개발이 곤란한 실정이다. 그러므로 일라이트를 비롯한 점토광물 자원에 대한 광업법규상의 개선과 제도적 정비가 시급히 요구된다. 국내에서 개발되고 있는 일라이트-운모의 광석 유형은 그 광물상과 산출상태에 따라 페그마타이트상 백운모, 운모편암상 백운모, 납석상 일라이트 및 점토상 일라이트로 구분된다. 일라이트와 운모는 서로 다른 용도로 사용되고, 그 용도에 따라 그 품위 및 품질 개념이 다르다. 일라이트-운모 광석의 품위 및 품질 면에서 가장 기본적인평가방식은 (1) 육안 및 편광현미경 관찰, (2) X-선회질 분석 및 (3) 화학분석인 것으로 생각된다. 특히 리트벨트법을 응용한 X-선회질 정량분석법은 일라이트의 품위를 산정하는데 유력한 수단이 될 수 있을 것으로 여겨진다. 국내 일라이트-운모 자원의 자원잠재성과 부가가치를 향상시키기 위해서는 광석에 대한 정확한 품위 평가를 바탕으로 가장 적절한 이용 분야를 모색해야 할 것으로 판단된다.

• The monthly packaging world
• /
• s.230
• /
• pp.92-99
• /
• 2012

KOREA STAR AWARDS는 패키징 $\triangle$완제품 $\triangle$재료(플라스틱, 종이 판지, 금속, 유리, 목재, 복합소재) $\triangle$친환경 $\triangle$기계(설비) 및 관련 부품 $\triangle$ 인쇄(라벨링) $\triangle$부자재 $\triangle$생산 및 가공공정 $\triangle$패키징 디자인 등의 분야에서 신기술 개발과 지속가능성을 통해 패키징 산업 발전에 기여한 기업, 그리고 패키징 관련 정책연구, 기술개발, 패키징산업 육성에 기여한 개인에게 시상. 2012 KOREA STAR AWARDS는 코리아스타상(기업, 학생, 공로부문)으로 지식경제부장관상(상장4점, 표창2점), 한국생산기술연구원장상(상장 12점, 표창1점), 한국포장기술사회장상(상장 20점) 총 39점 시상. 코리아스타상 기업부문 지식경제부장관상은 '에이스기계 종이상자 자동접착기의 패스트 폴딩 장치', 'LG생활건강 이자녹스 SMART 진동시리즈', '삼성전자 냉장고 친환경 재사용 포장', '한국에이버리 친환경 수분리성 점착라벨' 4개 제품 수상. 코리아스타상 공로부문 지식경제부장관표창은 (주)경연전람 김영수 대표와 김수일포장개발연구소 김수일 소장 수여. 본 고에서는 "2011 미래패키징 신기술 정부포상" 수상작들의 패키징 동향 및 유공자들의 공적 내용을 살펴보도록 한다.