References
- Jung, H. K., and Kang, C. G., 'An Induction Heating Process with Coil Design and Solutions Avoiding Coarsening Phenomena of Al-6 Pct Si-3 Pct Cu-0.3 Pct Mg Alloys for Thixoforimg,' Metallurgical and Materials Transactions A, Vol. 30A, No. 11, pp. 2967-2977, 1999 https://doi.org/10.1007/s11661-999-0134-5
- Tzimas, E., and Zavaliangos, A., 'Mechanical Behavior of Alloys with Equiaxed Microstructure in the Semi-Solid State at High Solid Content,' Acta Materialia, Vol. 47, No. 2, pp. 517-528, 1999 https://doi.org/10.1016/S1359-6454(98)00356-5
- Jung, H. K., Kang, C. G., 'A Study on Solutions Avoiding Liquid Segregation Phenomena in Thixoforming Process of Scroll Component,' Metallurgical and Materials Transactions B, 2000, to be accepted https://doi.org/10.1007/s11663-001-0014-x
- Garat, M., Blais, S., Pluchon, C., and Loue, W. R., 'Aluminium Semi-Solid Processing : from the Billet to the Finished Part,' Proceedings of the 5th Int. Conf. on Semi-Solid Processing of Alloys and Composites, Colorado School of Mines, Colorado, USA, pp. xvii-xxxi, 1998
- Hirt, G., Cremer, R., Winkelmann, A., Witulski, T., Zillgen, M., 'Semi-Solid Forming of Aluminum Alloys by Direct Forging and Lateral Extrusion,' J. of Materials Processing Technology, Vol. 45, pp. 359-364, 1994 https://doi.org/10.1016/0924-0136(94)90366-2
- Kang, C. G., Kang, S. S., and Jung, H. K., 'Influence of Process Parameters on the Defects in Thixoforming of Cast and Wrought Aluminum Alloys,' Advanced Technology of Plasticity, Vol. 3, pp. 1701-1706, 1999
- 大野 猛外 5人,'6061 アルミニウム 合金 のミクロ 組織および 機械的性質に及ぼす Mn, Zr の影響,' 經金屬, 第 48 卷, 第 2號, pp. 67-72, 1998
- 姜 孝京 外 2人, 'Al-Si-Cu系鑄造合金の凝固組織 に及ぼすストロンチウム及びTi-B添加冷却速度の影響,' 鑄造工學, 第 69卷, 第 5號, pp. 383-390, 1997
- 才川淸 外 3人, 'Al-Li系鑄造合金の鑄造性に及ぼすジルコンおよぴチタン添加の影響,' 鑄造學, 第 69卷, 第 6號, pp. 469-476, 1997
- 배원병, 강정윤, 이영석, 이성모, 홍창호, '알루미늄 주조/단조 공정에서 주조조직 제어에 관한 연구,' 한국정밀공학회지, Vol. 16, No. 9, pp. 41-47, 1999
- Kang, C. G., Jung, H. K., Jung, K. D., and Lee, D. H., 'Thixoforming Process of Aluminum Materials with Globular Microstructure,' Proceedings of the Korea-French Int. Joint Workshop on Metal Forming, KAIST, Daejon, Korea, pp. 51-56, 1999
- Jung, H. K., and Kang, C. G., 'Effect of Alloying Element on the Mechanical Behavior and Superficial Defects in Thixoforged Components of Al-Si Alloys,' Key Engineering Materials, 2000, in Press
- Kang, C. G., and Jung, H. K., 'Finite Element Analysis with Deformation Behavior Modelling of Globular Microstructure in Forming Process of Semi-Solid Materials,' Int. J. of Mechanical Sciences, Vol. 41, No. 12, pp. 1423-1445, 1999 https://doi.org/10.1016/S0020-7403(98)00107-6
- Jung, H. K., Kim, N. S., and Kang, C. G., 'Development of an Automatic Mesh Generation (AMG) with Quadrilateral Elements and Remeshing Scheme for Thixoforming Process Design,' J. of Materials Engineering and Performance, 2000, in Press
- Jung, H. K., Kang, C. G., and Moon, Y. H., 'Induction Heating of Semi-Solid Billet and Control of Globular Microstructure to Prevent Coarsening Phenomena,' J. of Materials Engineering and Performance, Vol. 9, No. 1, pp. 1-12, 2000 https://doi.org/10.1361/105994900770346222
- Jung, H. K., and Kang, C. G., 'Reheating Process of Cast and Wrought Aluminum Alloys for Thixoforging and Their Globularization Mechanism,' J. of Materials Processing Technology, 2000, in Press https://doi.org/10.1016/S0924-0136(00)00576-8
- 山本 秀雄, 關口 常久, '各種 Al合金の鑄造. 鍛造,' 第 12 回 アルミニウム鍛造技術講座, pp.1-8, 1992
- Fujikawa, S., Kitamua, Y., and Shimamura, S., 'Application of Numerical Methods for the Aluminum Casting/Forging Process,' J. of Materials Processing Technology, Vol. 27, p. 93-110, 1991 https://doi.org/10.1016/0924-0136(91)90046-H
- 櫻天久之, 'コンフオミックス法の以後の展開 ,' 第 19 回 アルミニウム鍛造委員會, pp. 1-33, 1994
- 神戶 洋史, 和夫 古岡, 英夫 三部, 隆宏 , 北岡 田治, 藤井 拓己, '鑄造鍛造 プロセスによる アルミニウムロ - ドホイ- ルの 實用化.' 輕金屬, 第 48 卷, 第 2 號, pp. 103-108, 1998