• Proceedings of the Korea Contents Association Conference
• /
• 2011.05a
• /
• pp.329-330
• /
• 2011

나노기술은 특정의 기술 영역에 속하는 것이 아닌, 나노크기 수준의 물질(소재)이나 부품 또는 소자, 시스템(기계) 등 거의 모든 기술 영역과 관련되어 있는, 응용의 성격이 강한 기술이다. 나노기술 개발 수준은 국가 간, 혹은 기업 간의 경쟁력을 결정할 중요한 요인 중 하나로 자리잡을 것이며, 나노기술의 현황과 발전 양상의 분석은 기술 기반 산업의 미래를 위해서도 꼭 필요한 연구의 주제일 것이다. 본 연구에서는 논문의 서지정보를 통해 최근 국내에서 연구되고 있는 나노기술 중 나노소재 분야의 융합도를 측정하고, 그 결과에 대한 시사점을 제시하고자 한다. 나노소재기술과의 융합은 주로 다학제과학과 화학, 물리학 등 응용분야가 넓고 여러 학문을 포괄적으로 수용할 수 있는 학문에서 많이 발생하였고, 그 외 전기전자, 엔지니어링 분야와의 융합 역시 발견할 수 있었다. 내부중심성과 융합도와의 연관성에 대한 연구가 더욱 활발히 이루어져 그 설명력을 높일 수 있다면, 현실적합성을 획득하여 과학정책과 기술발전에 방향성을 제시하는 하나의 모형이 될 수 있으리라 기대한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.537-538
• /
• 2015

최근 자전거의 활용범위가 출퇴근뿐만 아니라, 친환경 헬스케어 부각으로 자전거 타는 것에 많이 이용되고 있는 실정이다. 근래 몇 년 사이에 정부에서도 자전거 전용도로를 도시외각뿐만 아니라 자전거로 출퇴근 이용자들을 위해 안전하게 운행할 수 있도록 자전거 전용도로를 전국에 확대설치 하여 자전거 보급을 확대 하고 있다. 하지만 현재 국내에 많이 보급되어 있는 자전거는 대부분이 외국에서 반제품이 수입되어 국내에서 완제품으로 조림하여 판매되는 제품들이 주를 이루고 있으며, 자전거 부품 중에도 최근 외국에서 개발이 진행되고 있는 전자변속기 또한 외국의 기술들이 도입되어 제품들이 출시되고 있는 실정이다. 이에 외국의 기술적 우위로 인하여 한국의 자전거 산업발전에 어려움이 많은 것이 현실이다. 본 연구에서는 리니어모터를 이용하여 디지털 전동 변속기를 개발 하여, 변속의 신속성, 정확성을 확보하면서, 동시에 외국의 기술적 장벽을 넘고자 한다. 현행 자전거 뒤 변속기의 정확한 변위위치 확보하기 위하여 자전거 핸들에 장착되어 있는 변속레버를 디지털화 하여, 변속을 제어하게 되면 뒤쪽에 설치되어 있는 리니어모터를 위치 제어함으로써 가이드 샤프트 피치에 의하여 변속위치가 정밀하게 제어 할 수 있는 전동 변속기 제어시스템을 제안하고자 한다.

• Proceedings of the Technology Innovation Conference
• /
• 1998.06a
• /
• pp.57-90
• /
• 1998

This study attempts to explore the evolution paths of Korean SMEs'strategies and their technological teaming processes. Several different evolution paths are identified based on a dynamic strategic group analysis of 115 SMEs'strategy in the Korean electronic component industry for the period of 1990-1995. Further, inadept case analyses on technological learning processes in 5 firms are undertaken. Major findings of this study can be summarized as follows : 1) There are three dominant evolution paths in SMEs'strategy. First path indicates the evolution from a subcontractor or petty imitator group(a strategic group with the narrow product/market domain and the low level of accumulated resource/capabilities) into an innovator group(a strategic group with the narrow domain but high level of technological capability) by accumulating technological capabilities. Second, some firms move from a subcontractor group into a generalizer group(a strategic group with broad product/market domain but relatively low level of technological capability) by simply adding product lines. Third path involves firms which evolve from a subcontractor group into a production focus group(a strategic group with high level of production capability) by investing in production capabilities. 2) An in-depth case analysis shows those who succeeded in technological learning are managed by CEOs, who have technological expertise and strategic vision, and have made an effort to establish management practices to support innovation, such employee educational program, performance-based reward system, etc. The successful firms also aggressively pursue diverse external linkages with outside technology sources to learn product and process technologies. Fiendly, this study discusses several implications of the findings for the theoretical development and strategic management of small firms in Korea.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.5
• /
• pp.728-733
• /
• 2010

The conventional electro-mechanical circuit break and relay are widely used in large-sized DC power system. However, recently due to high reliability, remote controllability and small power dissipation of a RSSPC(Remote Solid State Power Controller), high-friendly DC power systems have increasingly adopted the RSSPC as a essential element. In this paper, we have conducted a mathematical modeling to analyze the performance of the proposed RSSPC system with the optimal signal range for $I^2t$. Based on the calculation, the RSSPC system has been implemented by DSP.

• Resources Recycling
• /
• v.26 no.3
• /
• pp.69-78
• /
• 2017

Magnesium has been used as parts of vehicles, case materials of notebook PC and mobile phone, and its demand has been increasing recently. Its extraction technologies were classified according to the two major reduction methods: the fused salt electrolysis and the thermal reduction method. A research on the extraction of magnesium from magnesite which has been being carried out at KIGAM was briefly introduced here. Magnesium was prepared using a fused salt electrolysis method through preparation of anhydrous magnesium chloride with lab scale experiments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.08a
• /
• pp.95-98
• /
• 2008

The vehicle has many technique change from The requirement of the safety the energy environment and convenience dimension is an enlargement toe. This is keeping changing the paradigm of the vehicle industry rapidly. The change to be technical such brought the intelligence of the former control device. And this organizes a sensor network among each systems and makes new traffic system. This paper a standard framework based on Sensor. We call it Vehicle Management System. The VMS used MOST network and It is able to make the stability of the component swap time or vehicle order the greatest.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.275-275
• /
• 2012

실용금속 중 가장 경량이고, 치수 안정성, 절삭성 등이 우수한 Mg과 각종 산업의 구조물, 전기전자 부품 등의 분야에서 방식용 코팅 제품으로 많이 사용되고 있는 Zn를 혼합박막으로 Zn-Mg 박막을 제작하였다. 또한 여기서는 모재와 Zn-Mg 박막 사이에 결합력 강화를 위하여 Al중간층을 삽입하고 (Zn-Mg)/Al 박막을 제작하였다. 이와 같이 혼합박막을 제작하는 것은 Zn, Mg, Al 등과 같은 단일박막의 밀착성과 내식성의 한계를 극복-향상시키기 위한 것이었다. 한편, 이와 유사한 혼합박막에 많이 사용되고 있는 희생양극의 성분적인 측면이나 구조적인 분석에 있어서는 연구의 진척이 많이 이루어지고 있지만, 밀착성과 내식성의 상관관계의 규명에 있어서는 기초 단계이다. 따라서 본 연구에서는 여러 가지 증착 조건에 따라 제작한 막에 대한 표면 몰포로지, 결정배향성, 밀착성과 내식성에 미치는 영향을 분석하여 이들의 상관관계를 규명함은 물론 Al 중간층의 유무에 따른 서로간의 특성을 분석하였다. 분석결과에 의하면 Zn, Mg, Al 단일박막과 Zn-Mg 혼합박막에 비해 Al 중간층을 삽입한 (Zn-Mg)/Al이 내식성은 물론 밀착성이 우수하게 나타났다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.461-464
• /
• 2009

The conventional electro-mechanical circuit break and relay are widely used in large-sized DC power system. However, recently due to high reliability, remote controllability and small power dissipation of a RSPC (Remote Solid State Power Controller), high-friendly DC power systems have increasingly adopted the RSPC as an essential element. In this paper, we have conducted the modeling of a RSPC circuit and the simulation analysis for $I^2t$ curve, respectively.

• Journal of Technology Innovation
• /
• v.24 no.1
• /
• pp.1-24
• /
• 2016

This study examined 142 electronic components, video, audio, and communications equipment manufacturers (KSIC 32) out of all the SMEs that responded to the Survey on Technology of the Small and Medium Enterprises in both 2005 and 2007 and empirically analyzed how the external resources utilization and the absorptive capability affected the management and the innovation performance in two years as well as how the absorptive capability moderated these relationships. According to the results of analysis, the external resources utilization, as measured by the technology collaboration and the governments R&D subsidies, did not have a significant impact on performance whereas R&D investment showed a positive (+) influence on the sales and R&D personnel ratio, negative (-). On the other hand, the moderating effect of absorptive capability varied by measurement method and independent variables. That is, when a technology collaboration takes place, the performance improved with the increase of R&D investment but R&D personnel ration had an opposite effect. The companies whose performance improved as the government R&D subsidies increase are those with low R&D investment or high R&D personnel ratio. These results demonstrate that the SME's external resources utilization cannot replace the internal and that the absorptive capability needs to be accumulated to maximize the effectiveness of external resources utilization. Also, the technology collaboration requires SME's aggressive investment in R&D and the government R&D subsidies turn out to be more helpful for the companies that already have the R&D personnel but have been unable to develop their own technology due to insufficient funds. This study has limitations in that it was conducted within the limited industry categories and samples, but has overcome those of the existing researches by identifying causal relationships through the use of longitudinal data.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.4
• /
• pp.159-168
• /
• 2012

The purpose of this study is to analyze the relationship of MOT and NPD performance in medium-sized manufacturing firms. To accomplish the purpose of the study, working hypotheses were established based on the literatures about the impacts of MOT factors on the NPD performance. The sample of this study is as follows : 12 electrical and electronics companies, 18 machine and engineering companies, 16 parts and materials companies. In order to verify hypotheses, the data were collected from team leader and manager of research center, R&D, and production department of these companies and the leader of R&D project team who all had experience in project or were participating in it in latest 3 years. The results of study were summarized as follows : First, in analysis on the reality of MOT factors in sample firms, will of top management level on the MOT was comparatively high but relatedness of business strategy and technology strategy, open R&D system, systematic time scheduling, management of R&D manpower, and developing and adapting PLM system were common level. Second, to improve NPD performance in medium-sized manufacturing firms, will of top management level on the MOT, relatedness of business strategy and technology strategy, open R&D system, systematic time scheduling, management of R&D manpower, and developing and adapting PLM system were intensively required.