• Title/Summary/Keyword: 전자기 잡음

Search Result 560, Processing Time 0.023 seconds

고정저항기의 개발을 위한 특성 고찰 및 향후동향

  • 강병돈;정진기
    • The Magazine of the IEIE
    • /
    • v.21 no.8
    • /
    • pp.1-9
    • /
    • 1994
  • 고정저항기의 개발에 있어서 고려해야 할 주요 특성인 저항온도계수, 잡음, 주파수특성, 전압계수 등을 고찰하였으며, 나아가서 박막저항기, 칩저항기, 다련칩저항기의 개발동향 등을 알아보았다.

  • PDF

Safety Considerations for Workers with an Implanted Electronic Medical Equipment in Various Working Environment (전자의료기 인체 삽입자의 작업환경에 따른 안전성에 관한 고찰)

  • 김정국;이종우;이상준;최태종;변미경;박재현;허웅
    • Proceedings of the Safety Management and Science Conference
    • /
    • 2004.05a
    • /
    • pp.233-239
    • /
    • 2004
  • 현재 국내 인체 이식용 전자 의료기의 이식건수는 매년 약 1800 여건으로 해마다 증가하고 있으며 그 연령대도 다양한 작업환경에 노출되는 청장년층으로 급속히 확대되어 가고 있다. 이러한 이식용 의료기는 인공 심장 박동기, 이식형 제세동기, 진통억제를 위한 이식형 전기 펄스 발생기, 이식형 약물주입기 등을 포함한다. 그러한 기기들은 미세한 생체 신호에 따라 반응하기 때문에 생체 신호이외의 잡음에 의한 오동작은 절대적으로 피해져야 하며 경우에 따라 생명위협과도 직결된다. 본 논문에서는 현재사용 중인 이식형 전자의료기들의 구조와 동작원리, 다양한 작업 환경 하에서 잡음의 영향을 고찰하고, 잡음에 의한 오동작의 방지 방안을 고찰함으로써 전자의료기 인체 삽입자의 작업환경에 따른 안전문제를 제고하고자 한다.

  • PDF

Noise properties of the PSS-PT-PZ pyroelectric infrared detector (PSS-PT-PZ초전형 적외선 검출기의 잡음특성)

  • 우승일;류기원;이성갑;이성희
    • Electrical & Electronic Materials
    • /
    • v.6 no.6
    • /
    • pp.573-581
    • /
    • 1993
  • 0.10Pb(Sb$_{1}$2/Sn$_{1}$2/)O$_{3}$-0.25PbTiO$_{3}$-0.65PbZrO$_{3}$ 세라믹을 소결온도 및 시간을 각각 1200-1250[.deg.C]에서 2, 4, 6시간으로 변화시켜 제작하였으며 시편의 소결조건 및 MnO$_{2}$(0~0.30mol%)첨가량에 따른 잡음특성을 관찰하였다. 초전계수 및 전압감도는 1250[.deg.C]에서 2시간 소결시킨 시편에서 각각 3.49x$10^{-8}$[C/$cm^{2}$K], 147[V/W]의 최대값을 나타내었다. 초전형 적외선 검출기의 잡음특성에 있어 증폭기의 전류잡음 .DELTA.V$_{i}$가 총 잡음전압에 대해 지배적인 경향을 나타내었으며 MnO$_{2}$가 0.24[mol%] 첨가된 1250[.deg.C]에서 2시간 소결시킨 시편에서 가장 양호한 pop-corn잡음특성을 나타내었다.다.

  • PDF

Architecture and Noise Analysis of Frequency Discriminators (주파수 판별기 구조 및 잡음 성능 분석)

  • Park, Sungkyung
    • Journal of IKEEE
    • /
    • v.17 no.3
    • /
    • pp.248-253
    • /
    • 2013
  • Frequency detector is a circuit that converts the frequency to a digital representation and finds its application in various fields such as modulator and synchronization circuitry. In this paper, a couple of first-order and second-order frequency discriminator structures are modeled and analyzed with their quantization noise sources. Also a delta-sigma frequency detector architecture is proposed. Through theoretical analysis and derived equations, the output noise is obtained, which is validated by simulation. The proposed all-digital frequency discriminator may be applied in the feedback path of the all-digital phase-locked loop.

Phase Noise Characteristics of Gate-bias Tuned Phase-lock Oscillator for Microwave Transceiver (Gate-바이어스 튜닝에 의한 마이크로파 트랜시버용 마이크로파 발진기 위상잡음 특성)

  • 정인기;민상보;이영철
    • Proceedings of the IEEK Conference
    • /
    • 2001.06a
    • /
    • pp.197-200
    • /
    • 2001
  • 본 논문에서는 병렬귀환 유전체 발진기를 P-HEMT 게이트단의 바이어스 진압을 제어시켜 안정된 위상동기신호가 나타나도록 P-HEMT 게이트 바이어스 튜닝에 의한 Ku-band 고안정 위상동기 마이크로파 발진기를 설계하였다. 위상동기방식은 외부에서 제공되는 125MHz의 기준주파수를 SRD로 체배시켜 하모닉 신호를 이용한 마이크로파 샘플링 위상검파 방식으로 설계하였으며, 고안정 특성과 저위상잡음을 나타내는 위상동기 마이크로파 발진기(phase locked microwave oscillator)를 바랙터 다이오드를 사용하지 않고 P-HEMT의 게이트단을 동조시키는 방식으로 위상동기 발진기를 설계하고 게이트 바이어스에 따른 위상잡음 관계를 분석하였다

  • PDF

Low Phase Noise VCO Using Spiral Resonator (Spiral 공진기를 이용한 저위상 잡음 전압 제어 발진기)

  • Jwa, Dong-Woo;Seo, Chul-Hun
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.45 no.7
    • /
    • pp.77-80
    • /
    • 2008
  • In this paper, low phase noise VCO using novel compact microstrip spiral resonator is proposed. A spiral resonator has super compact dimension, low insertion losses in the passband and high level of rejection in the stopband with sharp cutoff and a large coupling coefficient value, which makes a high Q value, and has reduced the phase noise. To increase the tuning range of VCO, varactor diode has been connected at the tunable negative resistance in VCO. This VCO has presented the oscillation frequency of $5.686{\sim}5.841GHz$, harmonics -29.83 dBc and phase noise of $-115.16{\sim}-115.17dBc/Hz$ at the offset frequency of 100 KHz.

Improvement of Linearity in Delay Cell Loads for Differential Ring Oscillator (지연 셀의 부하 저항 선형성을 개선한 차동 링 발진기)

  • 민병훈;정항근
    • Journal of the Institute of Electronics Engineers of Korea SC
    • /
    • v.40 no.6
    • /
    • pp.8-15
    • /
    • 2003
  • In this paper, the issue of the differential ring oscillator in designing low phase noise is linearity improvement of delay cell's load resistor. A novel differential delay cell that improves on the Maneatis load is proposed. The linearity improvement of load resistor results in lower phase noise in ring oscillator. For comparison of the phase noise characteristics, Ali Hajimiri's phase noise model is used. In order to have a low ISF(impulse sensitivity function), it is important to have a symmetry between rise time and fall time of oscillation waveform. The ISF value of ing oscillator based on the proposed delay cell is lower than that of the existing ring oscillators. Due to this result, the phase noise is improved by 2~3dBc/Hz for the same power dissipation and oscillation frequency.

Phase Noise Spectrum of LNB for PSK Multi-mode satellite transmission signal (PSK 고차모드 위성전송을 위한 저잡음 증폭 주파수 변환기의 위상 잡음 해석)

  • Kim, Young-Wan
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.12 no.7
    • /
    • pp.1180-1186
    • /
    • 2008
  • The LNB phase noise of user terminal for high data rate satellite transmission was analyzed in this paper. The phase noise severely affects the service performance in low data rate transmission as well as multi-mode signal for high data rate. As the satellite link frequency is increased, the effects of phase noise for multi-mode signal is increased. The phase noise of LNB, which is operated in high frequency band, is about equal to the transmission system phase noise and have an major effects on service performance degradation. The available transmission mode was analyzed in presence of phase noise of LNB and analysis method for LNB phase noise spectrum distribution was proposed in multi-mode signal.

Studyon Carrier noise Ratio of Voltage controlled Oscillator (전압제어 발진기의 신호대잡음지에 관한 연구)

  • 이재영
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.3 no.2
    • /
    • pp.51-56
    • /
    • 1996
  • 각종 통신기기의 주파수 합성기 등에 광범위하게 응용되고 있는 전압제어 발진기에 서 캐리어 대 잡음비(C/N비:Carrier noise Ratio)특성이 매우 중요하다. 특히 휴대용 단말기 에 쓰이는 소형 저소비전려의 VCO는 위상 잡음의 억제가 필수적이다. VCO의 C/N비 특성 은 공진회로의 선택도 Q와 능동소자의 각종 파라미터들 그리고 발전전력과 밀접한 관계가 있다. 본 논문에서는 CAD를 이용하여 우수한 C/N비를 갖는 900MHz대 VCO의 최적화 설 계방버을 제시하고 그 결과를 기초로 우수한 저잡은 VCO를 실현하였다.

Real-time Implementation of Acoustic Echo and Noise Canceller for Hands-free Communication in Car Environment (차량용 핸즈프리 통신을 위한 음향반향 및 잡음제거기의 실시간 구현)

  • 조점군;박선준;이충용;윤대희
    • Proceedings of the IEEK Conference
    • /
    • 2000.09a
    • /
    • pp.19-22
    • /
    • 2000
  • 최근 이동전화의 사용이 급격히 확산됨에 따라 핸즈프리 단말기를 이용한 전화통신의 필요성이 대두되고 있다. 차량내 핸즈프리 통신상황의 경우 근거리에 위치한 스피커와 마이크로폰의 커플링에 의해 발생하는 음향반향과 차량내에 존재하는 배경잡음은 통화 품질을 크게 저하시킨다. 본 논문에서는 이동통신에 적합한 음향반향제거기와 잡음제거기의 결합시스템을 제안하고, 이를 고정 소수점 DSP를 이용하여 실시간 구현하였다. 실시간 구현을 위하여 음향반향제거기에는 NLMS 알고리즘에 의해 구동되는 제한된 차수의 적응반향제거기법을 사용하였다. 잔여반향 및 배경잡음제거를 위해 CDMA방식의 셀룰라 이동통신에 사용되는IS-127 EVRC음성 부호화기의 표준안에 포함된 잡음제거방식을 사용하였다. 제안된 시스템을 16 비트 고정소수점DSP인 OAK DSP Core를 이용하여 약 18.6MIPS의 연산량으로 실시간 구현되었다.

  • PDF