• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.463-464
• /
• 2016

본 논문은 압전소자 발전기를 이용하여 하베스팅 에너지 발전량을 증대시키기 위한 에너지 하베스팅 방법을 제안하였다. 기존의 풀브리지 정류기만을 이용한 standard DC 방법에 압전소자와 병렬로 공진을 위한 인덕터와 MOSFET를 연결하여 parallel SSHI 회로를 구성하였으며, 또한 변위센서와 비교기를 통해 스위치 시점을 결정한다. 시뮬레이션 분석을 위해 압전발전기를 등가회로로 모델링하였으며, standard DC방법과 parallel SSHI 방법의 성능을 비교하여 parallel SSHI 방법이 standard DC 방법보다 약 13%의 전력이 증대된 것을 확인 하였다.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.549-552
• /
• 2000

본 논문에서는 주파수 영역 배열안테나의 계산량을 감소시키기 위한 센서링 부분적응 알고리듬을 제안한다. 제안한 알고리듬은 입력신호를 주파수 영역으로 변환한 후 CFAR(constant false alarm rate) 검파기법을 이용하여 간섭신호가 존재하는 주파수 대역을 찾아내고 이에 해당하는 가중치에 대해서만 적응 신호처리를 수행한다. 이때 CFAR 검파기의 오경보율은 출력신호의 전력 변화량을 이용하여 환경에 맞게 적응적으로 변화시켜서 최적 값으로 설정한다.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.525-528
• /
• 2000

This paper presents a circuit analysis and cotnrol example of favored configuration 6/4 SRM. SRM modeling and analysis are necessary for experiment. Thus this paper proposes a SRM modeling with PI controller (of driving converter) input voltage chopping and inductance profile when rotor position transformed. Through this simulation the designer can predict operating states of systems over a broad range of operating conditions.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.278-281
• /
• 2000

In this abstract a novel control scheme of voltage-source PWM rectifiers using only dc-side sensors is proposed. The phase currents are reconstructed from switching states of the rectifier and the dc output current. For effective current control the currents are estimated by a predictive state observer. Also both the phase angle and the magnitude of th source voltage are estimated by phase estimator and magnitude estimator respectively. The validity of the proposed ac sensorless technique is verified by experimental results.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.155-156
• /
• 2014

본 논문은 계통연계 목적으로 사용하는 LCL필터의 공진현상을 억제하기 위한 간단한 능동 댐핑 원리와 방법을 보인다. LCL필터는 기존의 1차 필터인 L필터에 비해 적은 동량으로 효과적인 출력파형의 고조파 저감 효과를 갖지만, LC파트 추가로 인해 허수축에 공진복소극이 존재하여 필연적으로 시스템에 공진이 발생하게 된다. 본 논문에서는 추가적인 센서나 수동소자의 사용 없이 LCL필터의 공진복소극을 상쇄하는 노치필터를 제어기에 적용하여 시스템의 안정성을 확보한다. 시뮬레이션을 수행하여 타당성을 입증한다.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.684-687
• /
• 1999

In this paper, a method for controlling a single phase PWM AC/DC converter without any voltage sensors is proposed. In this method, the source voltage is estimated by sliding mode observer and input current is synchronized with the estimated source voltage. The source voltage is estimated by current error between the actul and the estimated current. The experimental results confirm the validity of the proposed control method.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.179-183
• /
• 1999

This paper describes a new method for indirect sensing of the rotor position in switched reluctance motors using fuzzy logic algorithm. Through a novel fuzzy algorithm, the complete SRM magnetizing characterization is first constructed, and then used to estimate the rotor position. And also, the optimized phase is selected by phase selector. To demonstrate the promise of this approach, the proposed rotor position estimation algorithm is simulated for variable speed range.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.18-21
• /
• 1999

This paper presents a speed and position sensorless control of permanent magnet synchronous motors using an integral binary observer. In order to improve the steady state performance of the binary observer, the binary observer is formed by adding extra integral dynamics to the switching hyperplane equation. The observer structure and its deign method are described. The experimetntal results of the proposed algorithm are presented to demonstrate the effectiveness of the approach.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.307-310
• /
• 1999

This paper proposes a novel current control method of three-phase PWM rectifiers without phase current sensors. The features of this method are to reconstruct phase currents by using switching pattern of space vector modulation and to estimate phase currents by a predictive state observer for practical applications. Simulation results show that the performance of the proposed system is nearly the same as that of sensor-based system.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.489-492
• /
• 1999

This paper proposes a control method for three-phase voltage-source PWM converters using only a single current sensor in the DC link. A predictive current controller for the voltage-source PWM converter is used so that all phase currents can be reconstructed in a switching period although one or two of active vectors are applied only for a short time. Compensation of the 2 step delays is also included. In this paper single sensor current control using predictive state observer will be discussed, and investigated experimentally.