• Journal of the Korean Geotechnical Society
• /
• v.34 no.6
• /
• pp.61-73
• /
• 2018

When the shear deformation occurs on the slope reinforced with soil nail, a passive earth pressure is induced on the ground around the soil nail and the increase of shear deformation causes the earth pressure variation of the ground and the deformation and member force change of the soil nail. In this study, the shear behavior of the soil nail was analyzed experimentally by inducing the shear deformation in the vertical direction of the soil nail using a large-scale direct shear test equipment and it was verified through numerical analysis. The shear test was performed on the bonded length (6D, 8D, 10D and 12D) of the soil nail separated from the shear surface. As a result, it was observed that the continuous increase of the shear deformation caused the damage of the grout and the effect according to the bonded length was analyzed. Through the model test and the numerical analysis, it was confirmed that the transfer length of the soil nail was 0.2~0.22m, which is larger than 0.1m suggested in the previous study, and the shear zone was in the range of 0.6m from the shear surface.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.6
• /
• pp.85-93
• /
• 2008

For long piles driven in deep clay deposits, it is difficult to estimate the ultimate bearing capacity due to large resistance induced by long embedded depth, and also the load transfer curve due to large residual load induced by negative skin friction, even with the performance of pile load tests. In this research, a hi-directional load test on a PHC pile driven in deep soft deposit was performed in order to evaluate the tip and shaft resistances separately, which are feasible to estimate the ultimate bearing capacity of the pile. Residual load of the pile was determined by continuous monitoring of pile strains after the pile installation. The true resistance and true load-movement curve of the pile were properly estimated by taking account of the residual load. A model far behavior of the shaft resistance vs. movement was also proposed, which includes the effects of residual load based on the experiment. Consequently, it was proved that the residual load should be taken into consideration for correctly analyzing load test results of piles in deep clay deposits.

• Industry Promotion Research
• /
• v.2 no.2
• /
• pp.31-44
• /
• 2017

This study is to investigate the relationship between the communication type recognized by members of organization and the learning transfer climate in the organization, and when it comes to the type of communications within organization set as independent variable, four variables such as communication with supervisor, media quality communication, and organizational outlook communication were proposed and regarding learning transfer climate which is a dependent variable, four sub-parameters such as supervisor support, colleague support, transfer opportunity and organizational compensation recognition were selected. 116 copies of the statistical data excluding statistically insignificant surveys were used for 150 participants who participated in the 2015 core competency curriculum for SMEs and 3 months have passed, in order to achieve this study's objective. Meanwhile, the research hypothesis was verified with the collected data through frequency analysis, factor analysis, reliability verification, technical statistical analysis, and simple and multiple regression analysis by using the statistical package program of SPSS 20.0. Results of this study have shown that firstly, communication with supervisor, media quality communication, and organizational outlook communication all showed a positive (+) significant influence on the superior support in the influence relationship between communication type in organization and supervisor support which is learning transfer climate. Secondly, communication type in organization doesn't appear to affect colleague support of learning transfer climate. Thirdly, communication with supervisor, media quality communication, and organizational outlook except for communication with colleagues have shown a positive (+) influence on transfer opportunity in the influence relationship between communication type in organization and transfer opportunity of learning transfer climate. Lastly, communication with supervisor and communication on organizational outlook showed positive(+) influence in the influence relationship between communication type in organization and organizational compensation recognition of learning transfer climate.

• Journal of the Korean Society for Railway
• /
• v.16 no.5
• /
• pp.379-385
• /
• 2013

In this study, partial drilled shafts (Bottom Cast-in-place Concrete pile) were applied to the pilot test site to ensure the bearing capacity; we used the skin friction force in the IGM to analyze the feasibility of the application of IGM theory. The soil characteristics were analyzed in cohesive, non-smear, and smooth conditions for the application of the IGM theory via geotechnical investigation and measurement of the disturbance and surface roughness. Static load and load transfer tests were conducted to calculate the allowable bearing capacity and the skin friction force by depth. The skin friction force increased with increase in the depth and standard settlement, showing a very high correlation. In addition, because the unconfined strength ($q_u$), which is the most important parameter in the cohesive IGM, cannot be measured in a weathered granite area, the static load and load transfer test results and the N value were used to obtain $q_u$.

• Investigative Magnetic Resonance Imaging
• /
• v.13 no.2
• /
• pp.213-217
• /
• 2009

Solitary necrotic nodule (SNN) of the liver is a very uncommon benign lesion, and it is detected incidentally as a rule. It is important to differentiate SNN radiologically from various single hepatic nodules because SNN mimics hepatic metastasis, especially in staging work up of known primary malignancy. The reported imaging findings of SNN are well-defined nodule without enhancement or with subtle peripheral enhancement. There has been no report about the target-like SNN of the liver and about the imaging finding of 3T magnetic resonance imaging and positron emission tomography. We report a case of targetlike SNN of the liver, mimicking hepatic metastasis, with findings of various imaging modalities and try to find a cause of this nodule according to the pathologic and literature review.

• Journal of Chest Surgery
• /
• v.36 no.2
• /
• pp.118-121
• /
• 2003

A 25-year-old female patient was adimitted due to discomfort in the right chest and left epigastric area. Chest X-ray and chest CT showed a round 4$\times$4$\times$4cm sized mass located in the right lower lobe and abutted on the right diaphragm and metastatic lesions in the right lower lobe and right middle lobe. In exploratory thoracotomy, we discovered a mass originating from the right diaphragm which directly invaded the right lower lobe and metastatic subpleural lesions in the right lower lobe and right middle lobe. The mass was diagnosed as sarcoma by frozen section biopsy and we removed the mass by on bloc resection of the right diaphragm and right lower lobe. Metastatic subpleural lesions in the right lower lobe and right middle lobe were removed by wedge resection. The mass was malignant fibrous histiocytoma of the diaphragm in permanent pathologic examination and chemotherapy was done as adjuvant measure. We report one extremely rare case of malignant fibrous histiocytoma of the diaphragm with literature.

• Journal of Chest Surgery
• /
• v.36 no.4
• /
• pp.289-292
• /
• 2003

Primary malignant melanoma occurring in the lung is very rare and only few cases have been reported in the literatures. We have experienced one case of primary malignant melanoma of the right middle lobe. The patient was a 65-year-old male who had cough with blood tinged sputum for one month. Chest computed tomography showed about 4.5$\times$3 cm sized mass at the right middle lobe encasing the bronchus. Percutaneous needle biopsy was performed and confirmed to malignant melanoma. Physical examination and additional clinical history showed that the mass had not metastasized to other possible primary sites. The patient underwent thoracotomy with right middle lobe lobectomy. Histologically, the tumor showed sheets of tumor cells that have nuclear atypia and melanin pigment Postoperative course was uneventful and the patient has been followed up for 24 months with no recurrence.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.7
• /
• pp.1919-1928
• /
• 1999

There are no standard language for the specification of speed-independent circuits because existing specification methods are designed appropriately to each synthesis methodology. This paper suggests a method of using VHDL, a standard hardware description language, for the specification and synthesis of speed-independent circuits. Because VHDL is a multi-purpose language, we define a subset of VHDL which can be used for the synthesis. We transform the VHDL description into a signal transition graph and then synthesize speed-independent circuits by using a previous synthesis algorithm which uses a signal transition graph as the specification method. We suggest a systematic transformation method which transforms each VHDL statement into a partial signal transition graph and then merges them into a signal transition graph. This work is a step towards to the development of an integrated framework in which we can utilizes the existing CAD tools based on VHDL. Also, this work will enable a easier migration of the current circuit designers into asynchronous circuit design.

• The Journal of the Korea Contents Association
• /
• v.22 no.7
• /
• pp.136-148
• /
• 2022

This study aims to examine the effects of customer experience on the relationship between brand trust and customer experience. The survey was conducted on consumers who experienced chatbot service through internet shopping mall, and the research hypothesis was verified by analyzing the final 299 questionnaires. The results of the study showed that the customer experience using chatbot service had a positive effect on chatbot trust, had a positive effect on shopping mall trust, seller trust and brand trust through the mediating role of chatbot trust, and the social presence of chatbot had a moderating effect in the trust transfer. This study provides a theoretical basis that customer experience of chatbot service has positive effect on brand trust through chatbot trust, and suggests implications in that chatbot service can be an important means of marketing. In future studies, various studies related to chatbot trust are needed.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.801-807
• /
• 2024

Linear motion robots are devices that perform functions such as transferring parts or positioning devices, and require high precision. In companies that develop linear robot application systems, human workers are in charge of quality control and fault diagnosis of linear robots, and the result and accuracy of a fault diagnosis varies depending on the skill level of the person in charge. Recently, there have been many attempts to utilize artificial intelligence to diagnose faults in industrial devices. In this paper, we present a system that automatically diagnoses linear rail and ball screw misalignment of a linear robot using transfer learning. In industrial systems, it is difficult to obtain a lot of learning data, and this causes a data imbalance problem. In this case, a transfer learning model configured by retraining an established model is widely used. The information obtained by using an acceleration sensor and torque sensor was used, and its usefulness was evaluated for each case. After converting the signal obtained from the sensor into a spectrogram image, the type of abnormality was diagnosed using an image recognition artificial intelligence classifier. It is expected that the proposed method can be used not only for linear robots but also for diagnosing other industrial robots.