• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.405-405
• /
• 2012

에너지 갭의 크기가 큰 ZnO는 큰 여기자 결합과 높은 화학적 안정도를 가지고 있기 때문에 전자소자 및 광소자로 많이 응용되고 있다. ZnO는 광학적 및 전기적 성질의 여러 가지 장점 때문에 메모리, 나노발전기, 트랜지스터, 태양전지, 광탐지기 및 레이저와 같은 여러 분야에 많이 사용되고 있다. Zn와 쉘 구조가 비슷한 Cu 불순물은 우수한 luminescence activator이고 다양한 불순물 레벨을 만들기 때문에 전기적 및 광학적 특성을 변화하는데 좋은 도핑 물질이다. Cu가 도핑된 ZnO 나노구조를 전기화학적 증착법을 이용하여 형성하고, 형성시간의 변화에 따른 구조적 및 광학적 성질에 대한 관찰하였다. ITO 코팅된 유리 기판에 전기화학증착법을 이용하여 Cu 도핑된 ZnO를 성장하였다. Sputtering, pulsed laser vapor deposition, 화학기상증착, atomic layer epitaxy, 전자빔증발법 등으로 Cu 도핑된 ZnO 나노구조를 형성하지만 본 연구에서는 낮은 온도와 간단한 공정으로, 속도가 빠르고 가격이 낮아 경제적인 면에서 효율적인 전기 화학증착법으로 성장하였다. 반복실험을 통하여 Cu의 도핑 농도는 Zn과 Cu의 비율이 97:3이 되도록, ITO 양극과 Pt 음극의 전위차가 -0.75V로 실험조건을 고정하였고, 성장시간을 각각 5분, 10분, 20분으로 변화하였다. 주사전자현미경 사진에서 Cu 도핑된 ZnO는 성장 시간이 증가함에 따라 나노세선 형태에서 나노로드 형태로 변하였다. X-선 회절 측정결과에서 성장시간이 변화함에 따라 피크 위치의 변화를 관찰하였다. 광루미네센스 측정 결과는 Oxygen 공핍의 증가로 보이는 500~600 nm 대의 파장에서 나타난 피크의 위치가 에너지가 큰 쪽으로 증가하였다. 위 결과로부터 성장 시간에 따른 Cu 도핑된 ZnO의 구조적 및 광학적 특성변화를 관찰하였고, 이 연구 결과는 Cu 도핑된 ZnO 나노구조 기반 전자소자 및 광소자에 응용 가능성을 보여주고 있다.

• Journal of the Korean Chemical Society
• /
• v.44 no.2
• /
• pp.109-114
• /
• 2000

In this study, the optimum analytical condition of Differential pulse Voltammetry for the polymeric Sodium Alginate was studied and its reduction funtional groups were confirmed using Cyclic Vol-tammetry and IR spectroscopy. Optimum conditions were as followed; mercury drop size : medium size, accumulation time : 60sec, accumulation potential : -0.20V vs Ag/AgCl, scan rate : 100mV/sec, supporting electrolyte : 0.10M $NaClO_4$(pH 6.8). After polymeric Sodium Alginate was hydrolized at $100^{\circ}C$ in acidic condition, the current peaks of oligomer were compared with current peak of polymeric Sodium Alginate. In this optimum condition, calibration curve of polymer Sodium Alginate showed good linearity from 0.50ppm to 4.0ppm where as oligomeric Sodium Alginate showed good linearity from 0.05ppm to 0.24ppm.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.2
• /
• pp.376-381
• /
• 2017

We were investigated by cyclic voltammetry to the stability through the electrochemical characteristics of Langmuir-Blodgett films mixed with myristic acid and stearic acid. Fatty acid mixture monolayer LB films was deposited by the LB method on the indium tin oxide(ITO) glass. The electrochemical properties was measured by cyclic voltammetry with a three-electrode system in 0.01 N $NaClO_4$ solution. The measuring range is continuously oxidized to 1650 mV, with an initial potential of -1350 mV was reduced. Scanning rates of 50, 100, 150, 200, and 250 mV/s was set. As a result, LB monolayer films of fatty acid mixture was appeared on irreversible processes by the oxidation current from the cyclic voltammogram. Diffusion coefficient (D) of fatty acid mixture was calculated $7.9{\times}10^{-2}cm^2s^{-1}$ at 0.01 N $NaClO_4$ solution.

• Analytical Science and Technology
• /
• v.7 no.2
• /
• pp.141-147
• /
• 1994

The adsorptive stripping voltammetry of corticosterone was studied in $1.0{\times}10^{-2}M$ sodium hydroxide as supporting electrolyte. The analytical conditions were as follow : 360 sec. for deposition time, -8.0 volts deposition potential, medium size mercury drop, and 20mV/sec scan rate. Calibration curve has shown a linearlity in the range of $5.0{\times}10^{-9}M$ to $8.0{\times}10^{-7}M$ and the detection limits have been $9.5{\times}10^{-10}M$ for corticoterones. This method has shown such a high sensitivity even in dilute solution that has been useful for analyzing sex hormones in medical supplies without interference of additives.

• Analytical Science and Technology
• /
• v.7 no.2
• /
• pp.133-140
• /
• 1994

The determination of sex hormones by adsorpive stripping voltammetry in $1.0{\times}10^{-2}M$ sodium hydroxide as supporting electrolyte has been investigated in the conditions as follows : 240sec. for deposition time, -0.80 volts deposition potential, medium size mercury drop, and 20mV/sec scan rate. Calibration curve has shown a linearlity in the range of $5.0{\times}10^{-9}M$ to $8.0{\times}10^{-7}M$ and the detection limits have been $8.0{\times}10^{-10}M$ for progesterone and $1.4{\times}10^{-9}M$ for testosterone propionate. This method has shown such a good sensitivity even in dilute solution that has been use full for analyzing sex hormones in medical supplies without interference of additives.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.3
• /
• pp.421-428
• /
• 2012

We investigated an electrochemical properties for Langmuir-Blodgett (LB) nano-films of polyimide and phospholipid mixture. LB films of polyamic acid and phospholipid monolayer were deposited by the Langmuir-Blodgett method on the indium tin oxide(ITO) glass. The electrochemical properties measured by cyclic voltammetry with three-electrode system(an Ag/AgCl reference electrode, a platinum wire counter electrode and LB film-coated ITO working electrode) in $KClO_4$ solution. The current of reduction and oxidation range was measured from 1650 mV to -1350 mV, continuously. The scan rates were 50, 100, 150, 200 and 250 mV/s, respectively. As a result, monolayer LB films of polyamic acid and phospholipid mixture was appeared on irreversible process caused by the reduction current from the cyclic voltammogram. Diffusion coefficient (D) effect in the polyamic acid and phospholipid mixture was used in the LAPC with LLPC fewer than the diffusion coefficient values.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.754-760
• /
• 2013

We investigated an electrochemical properties for Langmuir-Blodgett (LB) monolayer films of sphingomyelin(SP) and polyamic acid(PAA) mixture(1:1, 2:1 and 3:1 molar ratio). LB monolayer films of mixture was deposited by the LB method on the indium tin oxide(ITO) glass. The electrochemical properties measured by cyclic voltammetry with three-electrode system in 0.1N $KClO_4$ solution. As a result, LB monolayer films of SP and PAA mixture was appeared on irreversible process caused by the reduction current from the cyclic voltammogram. Diffusion coefficient(D) in the SP and PAA mixture was calculated $2.670{\times}10^{-5}$, $3.562{\times}10^{-5}$ and $1.005{\times}10^{-5}cm^2s^{-1}$ at 1:1, 2:1 and 3:1 molar ratio, respectively.

• Journal of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.151-157
• /
• 1991

A sensitive stripping voltammetric study of the complex of indium with 8-hydroxyquinoline at a hanging mercury drop electrode was investigated in 0.1M acetate buffer solution. The effects of various analytical conditions on the reduction peak current of the adsorbed complex were discussed. Optimal analytical conditions were found to be the ligand concentration of $2 {\times}10^{-5}$M, solution pH 4.75, scan rate of 10 mV/s, deposition potential of -0.450V, a deposition time of 90 second. Interferences by other trace metals and Triton X-100 were also discussed. Detection limit was 0.2 ppb of indium after 90 sec. Deposition time, and the relative standard deviation(n = 10) at 4 ppb was 3.2%.

• Journal of the Korean Chemical Society
• /
• v.48 no.2
• /
• pp.137-143
• /
• 2004

The determination of 2-mercapto-1-methyl-imidazole (MMI) in 5.0${\times}10^{-2}$ M lithium perchlorate suporting electrolyte has been investigated by the differential pulse polarography. The optimum condition of MMI analysis was as follows; -0.9 volts initial potential, 0.08 mV pulse height, 2 mV/sec scan rate, and medium mercury drop size. Standard calibration curve showed a good linearlity in the range of 1.0${\times}10^{-7}M\;to\;8.0{\times}10^{-5}$ M and the detection limit has been (2.2${\pm}0.1){\times}0.1^{-9}$ M. This method was applicated for the determination of MMI in antithyroid drug without interference of additives.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.1
• /
• pp.64-70
• /
• 2013

We investigated an electrochemical properties for Langmuir-Blodgett (LB) monolayer films of sphingomyelin and polyamic acid(1:1 molar ratio) mixture. LB monolayer films of mixture was deposited by the LB method on the indium tin oxide(ITO) glass. The electrochemical properties measured by cyclic voltammetry with three-electrode system in $KClO_4$ solution. The current of reduction and oxidation range was measured from 1650 mV to -1350 mV, continuously. The scan rates were 50, 100, 150, 200 and 250 mV/s, respectively. As a result, LB monolayer films of sphingomyelin and polyamic acid mixture was appeared on irreversible process caused by the reduction current from the cyclic voltammogram. Diffusion coefficient (D) in the sphingomyelin and polyamic acid mixture was calculated $2.67cm^2s^{-1}{\times}10^5$, $5.23cm^2s^{-1}{\times}10^6$ at 0.1 N and 0.2 N $KClO_4$ solutions, respectively.