• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.3
• /
• pp.20-27
• /
• 2006

Power line for digital home appliances has own property that transmitting power connected to loads. Especially, power line communication(PLC) for the home network which has characteristics of load fluctuation makes variable noise characteristics. It becomes serious problems to maintain efficient communication performance. Thus, in this paper, we present an optimal modulation and demodulation method through mathematical analysis of each measured load fluctuation based on PLC for home appliances. To analyze and compare various modem methods presented in this paper, we analyzed them normally via computer simulation under various noise channel environments according to various load fluctuations. In addition, we certified its availability through hardware implementation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.25-30
• /
• 2005

We propose and design a fully conversed Ethernet and TDM transport system to guarantee qualify of service for Ethernet packet. Developed convergence system can support not only L2 VPN service and premium multimedia service based on MPLS protocol but also TDM leased line service, simultaneously. Developed convergence system has the advantage of providing high reliability that realizes high-quality and real time communications due to assign QoS profile and guarantee bandwidth per channel consist of VCGs without affect adjacent channels. Evaluation for proposed system was successfully performed within the ling network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11B
• /
• pp.1595-1599
• /
• 2001

In this paper, we have desired and implemented of ASK modulator MMIC operating at 5.8 GHz for OBE used in AGPS(Automatic Gate Passing System). The proposed ASK modulator MMIC was implemented to apply a single supply voltage of 3 V to the drain in order to decrease ACP(Adjacent Channel Power). As a result, it is exhibits a broad linear modulation range from 0.7 V to 3 V and an On/off characteristic over 40 dB. The layouts of ASK modulator MMICs was designed and fabricated by using ETRI 0.57m MESFET library The chip size was 1.0mm $\times$x1.0mm.

• Journal of Satellite, Information and Communications
• /
• v.12 no.2
• /
• pp.15-20
• /
• 2017

A conventional TV relay broadcast is a method of transmitting a program by means of a microwave, a leased wire, or a satellite. With the latest advances in LTE network, a relay approach using LTE mobile communications network has become increasingly competing with the traditional TV relay broadcast method. Since 2012, TV Chosun has been using the LTE network for marathon production, and channel A has also broadcast a marathon production broadcast using the LTE network. Therefore in this paper, we investigated the marathon relay method using LTE mobile communications network and compared with the traditional TV marathon relay method, and then suggested the optimum method for the marathon relay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4C
• /
• pp.365-373
• /
• 2003

In this paper, we design a versatle RS decoder which can decode RS codes of any block length n as well as any message length k, based on a modified Euclid's algorithm (MEA). This unique feature is favorable for a shortened RS code of any block length it eliminates the need to insert zeros before decoding a shortened RS code. Furthermore, the value of error correcting capability t can be changed in real time at every codeword block. Thus, when a return channel is available, the error correcting capability can be adaptiverly altered according to channel state. The decoder permits 4-step pipelined processing : (1) syndrome calculation (2) MEA block (3) error magnitude calculation (4) decoder failure check. Each step is designed to form a structure suitable for decoding a RS code with varying block length. A new architecture is proposed for a MEA block in step (2) and an architecture of outputting in reversed order is employed for a polynomial evaluation in step (3). To maintain to throughput rate with less circuitry, the MEA block uses not only a multiplexing and recursive technique but also an overclocking technique. The adaptive RS decoder over GF($2^8$) with the maximal error correcting capability of 10 has been designed in VHDL, and successfully synthesized in a FPGA.

• Journal of Digital Convergence
• /
• v.18 no.11
• /
• pp.527-538
• /
• 2020

This research measures the urgency and importance listening to experts' opinions as a proposal for vitalization of folk modern dance groups. Firstly, the open type FGI(Focus Group Interview) was implemented for five groups of an expert by applying the new industry foster theory, and total 24 types of second questionnaire were developed through importantly referred or repeated contents. They were distributed to 20 people including a dance group representative, a planner, a university professor and etc to measure experts' importance and urgency. In the research result, For big list, Financial aid for both importance and urgency appear first, and for comparative analysis of importance and urgency for small list, differences in infrastructure construction are shown. "expansion of dance program's advertisement channels" and "rank 1" appeared in "Secure space for dancers". Suggestions for analyzing such results are as follows. It is shown that "detailed financial aid for the operation of dance groups" and etc in the aspect of financial aid, "the employment of professional human resources including design and producing etc" in that of performance and education related production development, "training a dancer who can assimilate a complex genre" in that of manpower training, "arrangement of exclusive space for a dance group" in that of infrastructure building, and "the employment of professional human resources including design and producing etc" in that of consulting support are important and urgent matters considered by experts.

• The Journal of the Korea Contents Association
• /
• v.18 no.6
• /
• pp.706-718
• /
• 2018

This study analyzed Naver TV users' pattern of video clip watching, and analyzed the factors affecting the popularity of Naver TV's video clip. We selected 572 individual video clips that were ranked 50th in Naver TV rankings from September 10th to September 24th in 2017. We classified video clip's characteristics into several factors, including the number of likes, the number of subscriber, genre, video clip's types, and star appearances. We indexed the popularity of video clip, which implies the degree of popularity for each video clip. The results showed that the number of likes for video clips and the number of subscribers for each video clip were positively related to the popularity of video clip. Video clip's genre, video clip's type and star power positively affected the popularity of video clip. The effect of extras genre on the popularity of video clip was the lowest, followed by entertainment, music, and drama genre. but the difference among entertainment, music and drama genre was not statistically significant. Web-only video and non-broadcast video positively affected the popularity of video clip. Finally, the popularity of video clip was higher when stars appeared in the video clip.

• Proceedings of the Safety Management and Science Conference
• /
• 2003.05a
• /
• pp.43-51
• /
• 2003

제품 설계 및 디자인의 과정이 고도로 높은 기술력을 바탕으로 이루어지고 있으며, 국내의 기업체도 우수한 기술력과 높은 품질로 경쟁력을 키우며 다양한 고객의 요구에 대응하여 고객만족을 꾀하여야 한다 이의 기반이 되는 제품의 품질과 사양은 설계에서 시작되는데 아직 국내의 많은 기업들은 설계 및 제작 단계에서 많은 시간과 비용을 낭비하고 있다. 3D Modeling Solution은 설계오류가 적으며 시각적인 설계를 할 수 있어 최소의 인력으로 제품을 설계할 수 있는 장점이 있지만 너무 많은 기능으로 인해 사용자가 쉽게 적용하고 사용하기 어려운 단점을 가지고 있다. 본 연구에서는 이러한 산업현장의 어려움을 덜기 위해 3D 전용 Modeling Solution에 사용자가 쉽게 부품을 조림할 수 있는 엔진을 접목시켜 누구나 사용가능하고 신속한 신제품 개발이 이루어지도록 하였다. 본 연구에서는 Autodesk사의 Inventor와 Microsoft Visual Basic으로 Inventor에서 제공하고 있는 API함수를 이용하여 조립자동화를 위한 조립조건 생성, 조립자동화, 부품 재질변경, 수동조립 그리고 부품의 DB화를 구현하였다. 이 프로그램은 조립조건 설정 폼을 이용하여 부품의 조립속성을 생성하고 부품조립 폼을 이용하여 조립자동화를 실행할 수 있도록 하였다. 또한 모든 부품을 Database화 하여 부품을 손쉽게 탐색할 수 있으며, 추후에도 언제든지 재사용이 가능하여 제품설계 효율성을 극대화 할 수 있다. 현장 적용 시 신속한 신제품 개발과 품질의 우수성으로 고객만족을 꾀할 수 있으며, 시간과 비용을 동시에 줄여 경쟁사와의 경쟁우위를 높이는 해결책이 될 수 있다.-110 마이크로프로세서와 21285 주제어기가 장착된 EBSA-285 보드이다. 측정하면서 수행하였다. 검증 결과 random 상태에서는 문헌자료에 부합되는 예측결과를 보여주었으나, intermediate와 constant 상태에서는 문헌보다 다소 낮은 속도를 보여주었다 이러한 속도차는 추후 현장 데이터를 수집하여 보다 실질적인 검증을 통하여 조정되어야 할 것으로 판단된다.지발광(1.26초)보다 구애발광(1.12초)에서 0.88배 감소하였고, 암컷에서 정지발광(2.99초)보다 구애발광(1.06초)에서 0.35배 감소하였다. 발광양상에서 발광주파수는 수짓의 정지발광에서 0.8 Hz, 수컷 구애발광에서 0.9 Hz, 암컷의 정지발광에서 0.3 Hz, 암컷의 구애발광에서 0.9 Hz로 각각 나타났다. H. papariensis의 발광파장영역은 400 nm에서 700 nm에 이르는 모든 영역에서 확인되었으며 가장 높은 첨두치는 600 nm에 있고 500에서 600 nm 사이의 파장대가 가장 두드러지게 나타났다. 발광양상과 어우러진 교미행동은 Hp system과 같은 결과를 얻었다.하는 방법을 제안한다. 즉 채널 액세스 확률을 각 슬롯에서 예약상태에 있는 음성 단말의 수뿐만 아니라 각 슬롯에서 예약을 하려고 하는 단말의 수에 기초하여 산출하는 방법을 제안하고 이의 성능을 분석하였다. 시뮬레이션에 의해 새로 제안된 채널 허용 확률을 산출하는 방식의 성능을 비교한 결과 기존에 제안된 방법들보다 상당한 성능의 향상을 볼 수 있었다., 인삼이 성장될 때 부분적인 영양상태의 불충분이나 기후 등에 따른 영향을 받을 수 있기 때문에 앞으로 이에 대한 많은 연구가 이루어져야할 것으로 판단된다.

• Journal of IKEEE
• /
• v.27 no.1
• /
• pp.45-52
• /
• 2023

Cold-junction correction(CJC) and disconnection detection circuit design of various thermocouples(TC) and multi-channel TC interface circuit using them were designed. The CJC and disconnection detection circuit consists of a CJC semiconductor device, an instrumentation amplifier(IA), two resistors and a diode for disconnection detection. Based on the basic circuit, a multi-channel interface circuit was also implemented. The CJC was implemented using compensation semiconductor and IA, and disconnection detection was detected by using two resistor and a diode so that IA input voltage became -0.42V. As a result of the experiment using R-type TC, the error of the designed circuit was reduced from 0.14mV to 3㎶ after CJC in the temperature range of 0℃ to 1400℃. In addition, it was confirmed that the output voltage of IA was saturated from 88mV to -14.2V when TC was disconnected from normal. The output voltage of the designed circuit was 0V to 10V in the temperature range of 0℃ to 1400℃. The results of the 4-channel interface experiment using R-type TC were almost identical to the CJC and disconnection detection results for each channel. The implemented multi-channel interface has a feature that can be applied equally to E, J, K, T, R, and S-type TCs by changing the terminals of CJC semiconductor devices and adjusting the IA gain.

• Journal of Advanced Navigation Technology
• /
• v.12 no.4
• /
• pp.357-365
• /
• 2008

Broadcast is a efficient interactive method between a server and mobile clients via wireless channel and broadcast environments are incarnating as various applications. Most studies have been proposed in broadcast environments deal with read-only mobile transactions, many applications are emerging recently that need to manage the update transactions at mobile clients. So we propose a concurrency control for mobile transactions consisted mainly of update operations in broadcast environments. As an optimistic approach is applied for scheduling update transactions, repetitive aborts of update transactions are occur due to conflict between transactions. To solve this problem update transactions must have been executed with distributed manner, but unnecessary aborts are occur as well because of continuous restart. Thus, in this paper we propose a method that transactions are executed distributed manner and can avoid unnecessary aborts of update transactions. Proposed method has no unnecessary uplink and can save resources of mobile client.