• Title/Summary/Keyword: 전압 분배

Search Result 108, Processing Time 0.032 seconds

The controller design for grid-connected inverter based on photovoltaic (태양광 발전 기반의 계통 연계형 인버터 제어기 설계)

  • Ahn, Minho;Shin, Seongsoo;Seo, Seokchan;Choi, Jaeho
    • Proceedings of the KIPE Conference
    • /
    • 2013.07a
    • /
    • pp.120-121
    • /
    • 2013
  • 무공해이고 무한정한 에너지원이며 설치가 용이한 태양광 발전 시스템의 보급이 확산함에 따라 계통 연계형 발전 시스템을 설계하였다. 본 시스템은 인터리브 방식의 부스트 컨버터를 이용하여 MPPT를 수행하였고 계통연계를 위해 NPC 3-레벨 인버터를 사용하였다. NPC 3-레벨 인버터는 2-레벨 인버터와 비교했을 때 같은 스위칭 주파수에서 출력전압 및 전류의 고조파 성분을 반 이상 줄일 수 있는 장점이 있다. NPC 3-레벨 인버터는 DC 링크단의 전압을 일정하게 가져가는 역할을 하는 동시에 상, 하단의 커패시터의 전압을 균등하게 분배하는 제어를 하고, 출력전류를 정현적으로 가져가기 위한 제어를 하였다. 본 시스템의 시뮬레이션 및 실험을 수행하였고 THD 및 역률을 확인하였다.

  • PDF

Analysis of Volatage and Current Waveform Distortion Characteristics at Office Buildings (사무용 빌딩에서의 전압 및 전류파형 왜곡특성 분석)

  • Yoo, Jae-Geun;Lee, Sang-lck;Jeon, Jeong-Chay;Jeong, Jong-Wook;Lim, Young-Bae
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.19 no.1
    • /
    • pp.155-161
    • /
    • 2005
  • Nonlinear electronic loads used at office buildings distort the voltage and current waveform that cause the overheating of transformer losses, ELB(Electrical Leakage Breaker) tripping, and so on. This paper analyzed waveform distortion characteristics at several once buildings by comparing with magnitude of voltage and current harmonics, crest factor of voltage and current, phase voltage and current unbalance. As a consequence, severe current waveform distortion in phase and neutral line by harmonics and high current unbalance rates by unbalanced using of single loads among the three phases are investigated. The results of the study can be used in making decisions regarding reasonable and economical operating of loads at office buildings.

Interconnect Process Technology for High Power Delivery and Distribution (전력전달 및 분배 향상을 위한 Interconnect 공정 기술)

  • Oh, Keong-Hwan;Ma, Jun-Sung;Kim, Sungdong;Kim, Sarah Eunkyung
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.19 no.3
    • /
    • pp.9-14
    • /
    • 2012
  • Robust power delivery and distribution are considered one of the major challenges in electronic devices today. As a technology develops (i.e. frequency and complexity, increase and size decreases), both power density and power supply noise increase, and voltage supply margin decreases. In addition, thermal problem is induced due to high power and poor power distribution. Until now most of studies to improve power delivery and distribution have been focused on device circuit or system architecture designs. Interconnect process technologies to resolve power delivery issues have not greatly been explored so far, but recently it becomes of great interest as power increases and voltage specification decreases in a smaller chip size.

통신위성 전력제어 및 분배장치 설계 및 해석

  • Choi, Jae-Dong
    • Aerospace Engineering and Technology
    • /
    • v.2 no.1
    • /
    • pp.108-116
    • /
    • 2003
  • This research presents the design and analysis of PCDU(Power Control & Distribution Unit) of communication satellite. The PCDU of a spacecraft must provide adequate power to each subsystem and payload during mission life, and it also needs high reliability and performance in space environment. A control circuit of the PCDU include bus sensing and filter circuits, error signal amplification circuit, error compensation circuit of SAS(Shunt Assembly Switch) and BPC(Battery Power Converter). The phase margin and DC gain for the designed circuits are analyzed through the frequency response characteristics of the compensated control circuit. And also the transfer function of the battery power converter circuit are discussed at the battery CCCM(Charge Continuous Conduction Mode) and battery C/DCCM(Continuous/Discontinuous Conduction Mode).

  • PDF

Adaptive Droop Control Method for Multiple Energy Storage Systems in DC Distribution System (직류배전 시스템의 다중 에너지 저장장치 시스템을 위한 적응 드룹 제어)

  • Kim, Hyejin;Chun, Chang Yoon;Seo, Gab-Su;Lee, Kyoungjun;Cho, Bo-Hyung
    • Proceedings of the KIPE Conference
    • /
    • 2014.07a
    • /
    • pp.257-258
    • /
    • 2014
  • 본 논문에서는 직류 마이크로그리드 시스템에서의 분산 에너지 저장장치 시스템을 위한 제어 알고리즘을 제안한다. 각 에너지 저장장치의 전력 분배를 위해 state of charge (SOC)와 배터리 노화에 따른 용량 변화를 고려한 적응 드룹 제어 방식을 제안한다. 각 에너지 저장장치의 SOC에 따라 오프셋 전압을 변화시킴으로써 각 에너지 저장장치 간의 SOC 밸런싱을 유지한다. 또한, 에너지 저장장치의 용량 변화에 따라 드룹 기울기 변수를 변화시켜, 노화에 따른 전력 분배를 유지하도록 한다. 48V 직류배전 시스템의 시뮬레이션을 통해 제안된 제어방법을 검증한다.

  • PDF

Fabrication of the low driving voltage ZnS:Mn EL device and investigation of its electro-optical properties (저전압구동 ZnS:Mn EL device의 제작 및 전기 광학적 특성 조사)

  • 김재범;김도형;장경동;배종규;남경엽;이상윤;이상걸;양희선;이진호
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2000.02a
    • /
    • pp.320-321
    • /
    • 2000
  • 전기장 발광현상(Electroluminescence, 이하 EL)은 1936년 Destriau$^{[1]}$ 가 ZnS:Cu 분말에서 처음 전기장 발광현상을 발견한 이래 TFEL(Thin Film EL)소자의 구동전압을 감소시키는 문제는 ACTFEL(Alternating Current Thin Film EL)소자의 개발이후 계속적인 관심의 대상이 되어왔다. TFEL 소자는 전기적으로 용량소자이므로 전기장 인가시 각 층의 정전용량의 역수에 비례하는 전압이 분배되므로 동일한 조건의 형광막 사용시 소자의 구동전압을 낮추기 위해서는 절연박막의 두께를 줄이는 방법과 유전율이 높은 물질을 사용하는 방법이 있으나, 전자의 경우에는 박막의 결함이 생기기 쉬워 한계가 있기 때문에 고유전율 특성을 갖는 새로운 물질을 개발하는 것이 바람직하다. Ta$_2$O$_{5}$ 박막의 경우 작은 누설전류 특성과 고유전율 특성으로 인해 고집적을 요하는 반도체 분야에서 많은 연구가 진행되어 왔다. 또한 EL소자 응용시 효율면에서 우수한 특성이 기대되며, 특히 수분에 강한 특성을 가지고 있어 EL소자의 안정성이 예견되는 바이다. 본 연구에서는 Ta$_2$O$_{5}$ 박막의 산소 결핍에 따른 전기적 특성에 대해 연구하였고 Ta$_2$O$_{5}$ 박막을 이용한 저전압에서 구동가능한 전기장 발광소자를 제작하여 전기광학적 특성에 대해 연구하였다. (중략

  • PDF

Study on the Performance Verification Method and Failure Mechanism of Grading Capacitor of a Two-break Circuit-breaker (2점절 차단기 균압용 콘덴서 절연파괴 고장 메커니즘 및 성능검증 방법에 관한 연구)

  • Oh, SeungRyle;Han, Kisun;Kim, TaeKyun
    • KEPCO Journal on Electric Power and Energy
    • /
    • v.5 no.1
    • /
    • pp.11-15
    • /
    • 2019
  • Recently, the circuit-breaker rated voltage is getting higher as the transmission voltage increases. To increase the circuit-breaker rated voltage, a multi-break circuit-breaker which has two or more breakers in series is adopted. For multi-break circuit-breaker, a grading capacitor is used to mitigate the Transient Recovery Voltage(TRV) and control the voltage distribution across the individual interrupter units. However, all over the world, there are many failures such as mechanical damage, explosion due to insulation breakdown. Therefore, it is necessary to study the causes of failure and the new performance verification method. In this paper, we investigate the causes of dielectric breakdown of the grading capacitors in the KEPCO power system and propose the performance verification method.

Dynamic Voltage Scaling (DVS) Considering the DC-DC Converter in Portable Embedded Systems (휴대용 내장형 시스템에서 DC-DC 변환기를 고려한 동적 전압 조절 (DVS) 기법)

  • Choi, Yong-Seok;Chang, Nae-Hyuck;Kim, Tae-Whan
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.44 no.2
    • /
    • pp.95-103
    • /
    • 2007
  • Dynamic voltage scaling (DVS) is a well-known and effective power management technique. While there has been research on slack distribution, voltage allocation and other aspects of DVS, its effects on non-voltage-scalable devices has hardly been considered. A DC-DC converter plays an important role in voltage generation and regulation in most embedded systems, and is an essential component in DVS-enabled systems that scale supply voltage dynamically. We introduce a power consumption model of DC-DC converters and analyze the energy consumption of the system including the DC-DC converter. We propose an energy-optimal off-line DVS scheduling algorithm for systems with DC-DC converters, and show experimentally that our algorithm outperforms existing DVS algorithms in terms of energy consumption.

The Study of If Frequency Synthesizer IC Design for Digital Cellular Phone (디지털 이동통신단말기용 IF 주파수합성기 IC개발에 관한 연구)

  • 이규복;정덕진
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.8 no.1
    • /
    • pp.19-25
    • /
    • 2001
  • In this paper, the design and simulation results of IF frequency synthesizer section has been described. We has been used 0.8 $\mu\textrm{m}$ BiCMOS device and library of the AMS. IF frequency synthesizer section has been contained IF VCO, Phase Detector, Divide_by_8, Charge Pump and Loop Filter. IF frequency synthesizer has been shown operating voltage of 2.7~3.6 V, control voltage of 0.5~2.7 V and supply current of 11 mA. The measured results have been showed good agreement with the simulation results about supply current.

  • PDF

Design of an 5.8GHz band ASK-PA one-chip operating for DSRC using a GaAs MESFET (GaAs MESFET을 이용한 DSRC용 5.8GHz 대역 ASK-PA One Chip 설계)

  • 김병국;하영철;문태정;황성범;김용규;송정근;홍창희
    • Proceedings of the IEEK Conference
    • /
    • 2003.07b
    • /
    • pp.755-758
    • /
    • 2003
  • 본 논문에서 단거리전용통신(DSRC)용 OBE에 사용되는 5.8GHz 송신측 ASK와 PA를 one-chip화하여 MMIC로 설계를 및 제작하였다. 설계된 ASK-PA는 3V 단일 공급전원을 사용하였고, 능동 소자로서 GaAs MESFET을 사용하였다. ASK는 회로의 복잡도를 줄이기 위해 직접변조 방식을 채택하였고, 인접채널 간섭의 영향을 줄이기 위하여 드레인 제어 변조회로를 사용하였다. 또한 전력증폭기는 2단으로 하여 AB급으로 동작하도록 전압분배 바이어스회로로 구성하였다. 측정결과 3V의 공급전압에서 전체이득 20.63dB, 송신출력 7.8dBm으로 나타냈다. 공정은 ETRI 0.5㎛ GaAs MESFET 공정을 사용하였고, Chip size는 1.2mm×l.4mm이다.

  • PDF