• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.4
• /
• pp.43-49
• /
• 2010

Power capacitor has been used to compensate for the low power factor of inductive load and to reduce harmonics generated by the power conversion device with reactor. The increase of voltage and current and thermal generation are extremely hard on the life of condenser. Current will be increased, provided that voltage and frequency of condenser increase also. The increase of voltage and frequency justly extends thermal generation. Both act on insulation stress and can afford to premature fault In this paper, we measured thermal distribution of condenser with infrared rays camera in case of variance of voltage and frequency. We were assured that the increase of voltage and frequency produces high heat and exceedingly shortens the life of condenser.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.174-177
• /
• 2008

배전계통의 전압분포는 배전용변전소의 송출전압과 고저압선로의 전압강하, 고압선로의 전압조정장치, 고압선로의 구성, 수용가의 부하특성 등 여러 가지 요인에 의해 결정되는데, 이중 가장 큰 영향을 끼치는 요소가 배전용변전소의 송출전압 조정으로, 이것이 적절하게 조정되지 못하면 다른 요인을 아무리 잘 조정해도 수용가의 전압을 적정하게 유지시키는 것이 곤란하다. 따라서, 본 연구에서는 분산 전원이 연계되어 운용되는 경우, 전압조정장치의 최적 운용 알고리즘을 제시하여 수용가의 전압을 평가하고 개선하는 프로그램을 개발하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.1
• /
• pp.123-128
• /
• 2014

This paper analyzed the change of subthreshold current for channel dimension of double gate(DG) MOSFET. The nano-structured DGMOSFET to reduce the short channel effect had to be preciously analyze. Poisson's equation had been used to analyze the potential distribution in channel, and Gaussian function had been used as carrier distribution. The subthreshold current had been analyzed for device parameters such as channel dimension, and projected range and standard projected deviation of Gaussian function. Since this potential model was verified in the previous papers, we used this model to analyze the subthreshold current. Resultly, we know the subthreshold current was influenced on parameters of Gaussian function and channel dimension for DGMOSFET.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.849-851
• /
• 2015

본 연구에서는 비대칭 이중게이트 MOSFET의 상하단 게이트 산화막 두께 비에 대한 문턱전압이하 스윙 및 전도중심의 변화에 대하여 분석하고자한다. 문턱전압이하 스윙은 전도중심에 따라 변화하며 전도중심은 상하단의 산화막 두께에 따라 변화한다. 비대칭 이중게이트 MOSFET는 상단과 하단의 게이트 산화막 두께를 다르게 제작할 수 있어 문턱전압이하 스윙의 저하 등 단채널효과를 감소시키기에 유용한 소자로 알려져 있다. 본 연구에서는 포아송방정식의 해석학적 해를 이용하여 문턱전압이하 스윙을 유도하였으며 상하단의 산화막두께 비가 전도중심 및 문턱전압이하 스윙에 미치는 영향을 분석하였다. 결과적으로 문턱전압이하 스윙 및 전도중심은 상하단 게이트 산화막 두께 비에 따라 큰 변화를 나타냈다. 또한 채널길이 및 채널두께, 상하단게이트 전압 그리고 도핑분포함수의 변화에 따라 문턱전압이하 스윙 및 전도중심은 상호 유기적으로 변화하고 있다는 것을 알 수 있었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2621-2626
• /
• 2013

This paper has presented the potential distribution for asymmetric double gate(DG) MOSFET, and sloved Poisson equation to obtain the analytical solution of potential distribution. The symmetric DGMOSFET where both the front and the back gates are tied together is three terminal device and has the same current controllability for front and back gates. Meanwhile the asymmetric DGMOSFET is four terminal device and can separately determine current controllability for front and back gates. To approximate with experimental values, we have used the Gaussian function as doping distribution in Poisson equation. The potential distribution has been observed for gate bias voltage and gate oxide thickness and channel doping concentration of the asymmetric DGMOSFET. As a results, we know potential distribution is greatly changed for gate bias voltage and gate oxide thickness, especially for gate to increase gate oxide thickness. Also the potential distribution for source is changed greater than one of drain with increasing of channel doping concentration.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.691-694
• /
• 2013

This paper has presented the potential distribution for asymmetric double gate(DG) MOSFET, and sloved Poisson equation to obtain the analytical solution of potential distribution. The symmetric DGMOSFET where both the front and the back gates are tied together is three terminal device and has the same current controllability for front and back gates. Meanwhile the asymmetric DGMOSFET is four terminal device and can separately determine current controllability for front and back gates. To approximate with experimental values, we have used the Gaussian function as charge distribution in Poisson equation. The potential distribution has been observed for gate bias voltage and gate oxide thickness and channel doping concentration of the asymmetric DGMOSFET. As a results, we know potential distribution is greatly changed for gate bias voltage and gate oxide thickness, especially for gate to increase gate oxide thickness. Also the potential distribution for source is changed greater than one of drain with increasing of channel doping concentration.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2643-2648
• /
• 2015

This paper analyzes the phenomenon of drain induced barrier lowering(DIBL) for doping profiles in channel of asymmetric double gate(DG) MOSFET. The DIBL, the important short channel effect, is described as lowering of source barrier height by drain voltage. The analytical potential distribution is derived from Poisson's equation to analyze the DIBL, and the DIBL is observed according to the change of doping profile to influence on potential distribution. As a results, the DIBL is significantly influenced by projected range and standard projected deviation, the variables of channel doping profiles. The change of DIBL shows greatly in the range of high doping concentration such as $10^{18}/cm^3$. The DIBL increases with decrease of channel length and increase of channel thickness, and with increase of bottom gate voltage and top/bottom gate oxide film thickness.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.8
• /
• pp.1117-1123
• /
• 2011

Ungrounded power systems are adopted onboard vessels which enable more stabilized power supply even in case of electric leakage to hull. If earthing faults happen at these systems, they make grounding impedances of power lines unbalanced each other on the three phases, resulting in high voltages to hull which can bring more possibilities of electric shocks and electric fires. This study focuses on how to configure a calculation module for transferring a grounded condition by lowered insulation resistance into a vector diagram of the voltages to hull. By using the module, the loci of neutral points were acquired to analyze how voltages to hull are affected by earthing faults and the distributed capacitances between power lines and hull. The suggested module was simulated and compared to the measured values from a test power system in good results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.156-162
• /
• 2015

This paper has analyzed how conduction path and electron concentration for the device parameters such as oxide thickness, channel doping, and top and bottom gate voltage influence on subthreshold swing of asymmetric double gate MOSFET. Compared with symmetric and asymmetric double gate MOSFET, asymmetric double gate MOSFET has the advantage that the factors to be able to control the short channel effects increase since top and bottom gate oxide thickness and voltages can be set differently. Therefore the conduction path and electron concentration for top and bottom gate oxide thickness and voltages are investigated, and it is found the optimum conditions that the degradation of subthreshold swing, severe short channel effects, can reduce. To obtain the analytical subthreshold swing, the analytical potential distribution is derived from Possion's equation. As a result, conduction path and electron concentration are greatly changed for device parameters, and subthreshold swing is influenced by conduction path and electron concentration of top and bottom.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2069-2071
• /
• 2005

본 연구에서는 플라즈마 식각 공정 시 식자률, 선택비, wafer 손상등과 중요한 관련이 있는 이온 에너지 분포(IED)를 측정하기 위해서 챔버 내에 직접적으로 분석기를 설치하지 않고 챔버 외부에서 비 침투적(noninvasive)인 방법을 사용하여 측정하였다. 이 방범은 신호선 중 한 곳에 측정 점을 잡기 위한 연결 장치만 필요하며 그곳에서의 전안 신호와 전류 신호를 오실로스코프에서 측정한 후 미리 얻어진 챔버 구조 모델링 계수 등을 통해 실제 바이어스 전극에 걸리는 전압 및 전극에서 플라즈마로 흐르는 전류를 유추한다. 전압 및 전류측정값과 power balance와 particle balance를 적용하여 얻은 플라즈마 특성 상태 변수들을 사용하여 oscillating step sheath model을 기반으로 한 분석 프로그램을 통해 실시간 이온에너지 분포 결과를 얻었다. 실제 공정 시 바이어스 주파수 변화, 바이어스 파워 변화, 소스 파워변화 조건 등에 따른 이온 에너지 분포 측정 및 분석을 통해 비 침투적측정방법 적용의 가능성과 장점을 확인하였다.