• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.1
• /
• pp.27-35
• /
• 2015

In this paper, we suggested a RS485 based CSMA/CD protocol that is available in low speed multi-node networks such as industry control communication network and home network etc. The suggested protocol was compared to widely used Master-Slave protocol, Modbus. We modeled realistic control network and showed that the average delay and throughput performance were significantly improved in the different transmission rates.

• Journal of KIISE:Information Networking
• /
• v.28 no.3
• /
• pp.347-354
• /
• 2001

This paper proposes and analyzes an error control scheme which tries to recover the transmission error within the deadline of a message on FDDI networks. The error control procedure does not interfere other normal message transmissions by delivering retransmission request via asynchronous traffic as well as by delivering retarnsmitted message via overallocated bandwidth which is inevitably produced by the bandwidth allocation scheme for hard real-time guarantee. The receiver counts the number of tokens which it meets, determines the completion of message transmission, and finally sends error report. The analysis results along with simulation performed via SMPL show that the proposed scheme is able to enhance the deadline meet ratio of messages by overcoming the network errors. Using the proposed error control scheme, the hard real-time network can be built at cost lower than, but performacne comparable to the dual link network.

• The KIPS Transactions:PartC
• /
• v.16C no.2
• /
• pp.237-244
• /
• 2009

The congestion in wireless sensor network increases the ratio of data loss and causes the delay of data. The existing congestion protocols for wireless sensor network reduces the amount of transmission by control the sampling frequency of the sensor nodes related to the congestion when the congestion has occurred and was detected. However, the control method of sampling frequency is not applicable on the situation which is sensitive to the temporal data loss. In the paper, we propose a new congestion control, ACT - Adaptive Congestion conTrol. The ACT monitors the network traffic with the queue usage and detects the congestion based on the multi level threshold of queue usage. Given network congestion, the ACT increases the efficiency of network by adaptive flow control method which adjusts the frequency of packet transmission and guarantees the fairness of packet transmission between nodes. Furthermore, ACT increases the quality of data by using the variable compression method. Through experiment, we show that ACT increases the network efficiency and guarantees the fairness to sensor nodes compared with existing method.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.5
• /
• pp.859-870
• /
• 2020

The MQTT-SN (Message Queuing Telemetry Transport-Sensor Network) protocol is a message transmission protocol used in a sensor-based Internet of Things (IoT) environment. This MQTT-SN protocol is a publish-subscribe model with a broker in the middle of message transmission, and each IoT device sends and receives messages through an intermediary when delivering messages. However, the MQTT-SN protocol does not provide security-related functions such as message security, mutual authentication, access control, and broker security. Accordingly, various security problems have recently occurred, and a situation in which security is required has emerged. In this paper, we review the security requirements of MQTT-SN once again, and propose a modified protocol that improves security while satisfying the constraints in the environment where the resource of IoT to which this protocol is applied is limited. Unlike the existing protocol, the security field and authentication server have been added to satisfy the security requirements. In addition, the proposed protocol is actually implemented and tested, and the proposed protocol is evaluated for practical use in terms of energy consumption.

• Journal of KIISE:Information Networking
• /
• v.31 no.1
• /
• pp.20-26
• /
• 2004

A congestion control algorithm to prevent buffer overflow in MSR(Mobility Support Router) for I-TCP is proposed. Due to high bit error rate and frequent hand-offs over wireless environment, the current congestion control scheme in TCP Reno over mixed(wired and wireless) network exhibits lower throughput than the throughput achieved over wired only network. I-TCP has been proposed to address this by splitting a TCP connection into two TCP connections over wired section and wireless section, respectively. However, buffer overflow in MSR may occur whenever there are excessive bit errors or frequent hand-offs. This may lead to the loss of packets acked by MSR(resident in buffer) to the sender, but not received by the receiver, breaking TCP end-to-end semantics. In this Paper, a new scheme is proposed to prevent the MSR buffer from overflow by introducing “flow control” between the sender and the MSR. Advertised window for the TCP connection between the sender and the MSR is tied to the remaining MSR buffer space, controlling the flow of packets to the MSR buffer before overflow occurs.

• Journal of Digital Contents Society
• /
• v.13 no.3
• /
• pp.353-358
• /
• 2012

Wireless sensor networks consist of resource constraint devices which typically send data measured by sensors attached to the end devices towards a coordinator. The most often used medium access control protocol used in wireless sensor networks is the standard IEEE 802.15.4, where it is wireless standard introduced for low power, low cost wireless communication with moderate data rates. In this paper, we present implementation of both the IEEE 802.15.4 protocol stack and UART interface on the TI CC2530. We show that data via UART of our implemented IEEE 802.15.4 board are transmitted correctly in terms of captured frames.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.3
• /
• pp.31-39
• /
• 2012

In this paper, we propose an energy-aware source routing protocol for maximizing a network lifetime in mobile ad hoc network environments. The proposed routing protocol is based on the source routing and chooses a path that maximize the path lifetime, by considering both transmit/receive power consumption and residual battery power in the mobile nodes from the perspective of source-destination end-to-end. This paper proposes a new routing cost and designs a new routing protocol for minimizing the control packet overhead occurred during the route discovery. Simulation results show that the proposed scheme has similar performances to the conventional routing schemes in terms of the number of transmission hops, transmission rate and total energy consumption, but achieves the performance improvement of 20 percent with respect to the lifetime.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• fall
• /
• pp.248-251
• /
• 2021

방송장비가 네트워크 기술을 만나 진화하고 있다. 네트워크 케이블로 초고해상도 영상과 다채널 음향 데이터를 송·수신하고, 다수의 방송장비 제어를 가능케 하는 NDI(Network Device Interface)의 등장으로 방송장비와 네트워크 기술이 융합되고 있다. 최근 국내외 여러 기업이 네트워크 기반의 방송 솔루션을 출시하고 있어, 관련 산업계는 향후 방송장비 시장이 네트워크 기반으로 개편될 것으로 전망하고 있다. NDI는 뉴텍(NewTek)에서 개발한 IP 전송 프로토콜의 일종으로 무(無)손실, 압축, 제로(Zero) 딜레이, 멀티캐스트 등의 특징을 갖고 있다. 기존 비디오 전송 프로토콜이었던 SDI(Serial Device Interface)와는 다르게 네트워크에서 방송장비를 운용할 수 있도록 만들어진 프로토콜이다. 본 논문에서는 NDI를 기반으로 앞으로 다가올 포스트 코로나 시대에 대응할 효율적인 방송 환경을 제안하고자 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.12
• /
• pp.1841-1854
• /
• 1993

In this paper, the packet voice protocol for the transmission of voice signal onto ethernet is implemented in a personal computer (PC). The packet voice protocol used is a modified one from CCITT G.764 packetized voice protocol. The hardware system to facilitate the voice communication onto ethernet is divided into telephone interface, speech processing, PC interface and controllers. The software structure of the protocol is designed according to the OSI seven layer architecture and is divided into three routines : ethernet device driver, telephone interface, and processing routine of the packet voice protocol. Experiments through ethernet with telephone interface show that this packet voice communication achieves satisfactory quality when the network traffic is light.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04a
• /
• pp.484-486
• /
• 2002

Mobile IP는 이동단말의 macro-mobility를 지원하는 표준이다. 그런데, Mobile IP는 도메 인내에서의 빈번한 핸드오프상에서는 많은 단점이 있다. HA(Home Agent)로 빈번하게 시그널을 보내기 때문에 많은 제어 메시지 오버gp드가 있으며, 핸드오프중의 많은 패킷 손실이 있다. Micro-mobility프로토콜은 기존 mobile IP의 단점을 보완하기 위해 나온 프로토콜이다. 무선 네트웍상의 도메인내에서의 이동성을 지원하며, 손실과 메시지 오버 헤드를 줄여 핸드오프시 높은 성능향상을 주고, 효율적인 위치관리를 제공한다. TCP(Transmission Control Protocol)는 전통적인 네트웍에서 잘 동작하는 신뢰성 있는 연결지향성 전송프로토콜이다. 그러나, TCP는 Mobile IP를 이용한 무선환경하에서는 잦은 핸드오프 때문에 손실과 지연이 일어나서 많은 성능저하가 일어난다. 본 논문에서는 TCP Tahoe, Reno, NewReno, SACK를 micro-mobility 프로토콜상에서 사용하였을 때 어느 TCP버전과 micro-mobility프로토콜이 가장 효율적인지를 제시한다.