• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1119-1124
• /
• 2011

The operation of current conveyor circuit is similar to an operational amplifier and a current conveyor circuit has the characteristics such as good linearity and stability. In this paper, a frequency-to-voltage converter circuit is designed by using a current conveyor circuit. The supply voltage is 5volts and the designed circuit is simulated by HSPICE. The range of the input frequency is from 4kHz to 200kHz. From the simulation results the error of the output voltages is less than from -1.3% to +2.5% compared to the calculated values.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.522-523
• /
• 2017

Analog-to-Digital converter is designed using a current conveyor circuit and a time-to-digital converter. The analog voltage is sampled using the current conveyor circuit and then the voltage is converted to time information by the discharge of the sampling voltage. The time information is converted to digital value by the counter-type time-to-digital converter. In order to reduce the converted error the clock is synchronized with the time information pulse.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.891-896
• /
• 2011

This paper describes the differential voltage-to-frequency converter which is realized current conveyor circuits. The output frequency of the differential voltage-to-frequency converter is proportional to the difference of two input voltages. The designed circuit is simulated by HSPICE. The range of input voltage difference is from several volts to several milli-volts. From the simulation results the error is less than from -1.9% to +1.8% compared to the calculated values.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2933-2938
• /
• 2014

In this paper, the FLL(Frequency Locked Loop) circuit using current conveyor circuit is designed by $0.35{\mu}m$ CMOS process. The FLL circuit is built in a frequency divider, a frequency-to-voltage converter, a voltage subtractor and a oscillator and the circuit blocks have a symmetric structure to improve a reliability characteristics with a process variation. From the simulation results, the variation rate of output frequency is about less than ${\pm}1%$ when the channel length, channel width, resistance and capacitance are varied ${\pm}5%$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.7
• /
• pp.885-890
• /
• 2020

In the distance measurement system the time-to-digital conversion circuit used measures the distance using the time interval between the start signal and the stop signal. The time interval is generally converted to digital information using a counter circuit considering the response speed. Therefore, a clock signal with a high frequency is required to improve precision, and a clock signal with a high frequency is also required to measure fine distances. In this paper, a counter circuit was designed to increase the accuracy of distance measurement while using the same frequency. The circuit design was performed using a 0.18㎛ CMOS process technology, and the operation of the designed circuit was confirmed through HSPICE simulation. As a result of the simulation, it is possible to obtain an improvement of four times the precision compared to the case of using a general counter circuit.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.636-641
• /
• 2019

A simple resistance deviation-to-time period converter is proposed for interfacing resistive half-bridge sensors. It consists of two 2nd generation current conveyors(CCIIs). The proposed converter has simpler circuit configuration than the conventional converters using operational amplifiers or operational transconductance amplifiers(OTAs). The proposed converter was simulated using CCII implemented with AD844 IC chips. The simulation results show that the converter has a conversion sensitivity of $0.01934ms/{\Omega}$ over a range of $100-500{\Omega}$ resistance deviations and a linearity error less than ${\pm}0.002%$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.577-582
• /
• 2016

The synchronous TDC(Time-to-Digital Converter) of counter-type using current-conveyor is designed by $0.18{\mu}m$ CMOS process and the supply voltage is 3 volts. In order to compensate the disadvantage of a asynchronous TDC the clock is generated when the start signal is applied and the clock is synchronized with the start signal. In the asynchronous TDC the error range of digital output is from $-T_{CK}$ to $T_{CK}$. But the error range of digital output is from 0 to $T_{CK}$ in the synchronous TDC. The error range of output is reduced by the synchronization between the start signal and the clock when the timing-interval signal is converted to digital value. Also the structure of the synchronous TDC is simple because there is no the high frequency external clock. The operation of designed TDC is confirmed by the HSPICE simulation.