• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.5
• /
• pp.18-22
• /
• 1989

We calculate the distribution of the induced current on the strip by the TE waves on the infinite conducting strip. The boundary equations represented as the spatial domain function becomevery complicated equations including convolution integral. As we transform it to the spectral domain, we have a very simple equation expressed by some algebraic multiplication of the current density function and Green's function. It is shown that the computation result of the induced current distribution gives the optimum value, when the stop condition of iteration presented in this paper are satisfied.

• Progress in Superconductivity
• /
• v.13 no.1
• /
• pp.34-39
• /
• 2011

We have performed measurements of the local magnetic field distribution of YBCO coated conductors using Low-temperature Scanning Hall Probe Microscopy (LT-SHPM). Distribution of stray magnetic field of various types of YBCO coated conductors in the superconducting state was measured in presence of external magnetic fields. We analyzed one dimensional and two dimensional local current distribution using inversion technique from the magnetic field distribution.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.1
• /
• pp.24-31
• /
• 2011

In order to measure corrosion level of reinforcement rebar in RC structures, non-destructive test methods which are concrete surface current density method and infrared thermographic technique were employed to measure corrosion levels. Experimental test parameters were various levels of corrosion states(0, 1, 3, 5, 7% of weight loss) and concrete cover depth(30 mm, 40 mm) and two different reinforcing rebar arrangements. The larger amount of concrete surface current density, the higher corrosion level in reinforcement rebar. The laboratory conditions which are ambient temperature and humidity have negligible effect on the infrared thermographical data. After analysis of current density and temperature distribution from concrete surface, corrosion level of reinforcement rebar embedded in concrete can be measured qualitatively based on the amount of electric current and heat flux.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.3
• /
• pp.152-156
• /
• 2000

The effect of cupric ion concentration on the throwing power has been studied in the electrodeposition of Cu on the porous reticular electrodes with the electrolytes of $CuSO_4\;and\;H_2SO_4$. Sulfuric acid electrolytes with lower concentration of $CuSO_4$ improved throwing power in electrodeposition of copper not only due to higher cathodic polarizability but also due to higher conductivity of the electrolytes. The increase in conductivity of the electrolytes at low concentration of $CuSO_4$ could be also illustrated by the decrease in viscosity of the electrolytes. It was found that both the throwing power and the limiting current density should be taken into account in the electrodeposition of Cu on the reticular electrodes. According to the experimental results, the electrolyte of 0.2M $CuSO_4$ and 0.5M $H_2SO_4$ was found to be the most appropriate condition at the current density of $10mA/cm^2$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.2
• /
• pp.334-343
• /
• 1997

Reference white in color television receiver can be achieved by adjusting the RGB gun current ratio and it is necessary to provide additional gain ratio adjustment for the RGB video signal. Generally, the gun current density profile has a gaussian distribution and the gain-bandwidth product of RGB channel amplifieris constant. Therefore brightness and spatial resolution are changed with variations in reference white of receiver. In this paper, the effect of RGB gun current and channel gain ratios on brightness and resolution of CPT is analyzed. Brightness is increased with the color temperature of referenc white because of Helmholtz-kohlrausch effect. The change in ligh output is more abrupt and spatial resolution is improved with unity current ratio. For more bright and improved ressolution we also present the range of color temperature of reference white for P22 phosphors.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.383-383
• /
• 1999

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.74-74
• /
• 2012

습식도금 전산해석에서 도금두께의 계산에는 전류밀도, 과전압, 도금효율 값의 영향을 받는다. 현재 상용되고 있는 도금 전산해석 시뮬레이션의 경우 이러한 도금용액의 특성값이 들어가나 유동(교반)에 따른 음극표면에서의 확산층 두께, 과전압변화를 적용하지 않고 있다. 따라서 본 연구에서는 실험을 통하여 도금용액(구리, 크롬, 아연)의 유동에 따른 데이터베이스를 확보하고 전산해석 시뮬레이션에 적용하여 계산하고 유동에 따른 도금두께 분포를 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.2
• /
• pp.161-170
• /
• 2012

There are many factors to consider when attempting to improve the efficiency of fuel cell operation, such as the operation temperature, humidity, stoichiometry, operation pressure, geometric features, etc. In this paper, the effects of the operation pressure were investigated to find the current density and water saturation behavior on a cross section designated by the design geometry. A two-dimensional geometric model was established with a gas channel that can provide $H_2$ to the anode and $O_2$ and water vapor to the cathode gas diffusion layer (GDL). The results from this numerical modeling revealed that higher operation pressures would produce a higher current density than lower ones, and the water saturation behavior was different at operation pressures of 2 atm and 3 atm in the cathode GDL. In particular, the water saturation ratios are higher directly below the collector than in other areas. In addition, this paper presents the dependence of the velocity behavior in the cathode on pressure changes, and the velocity fluctuations through the GDL are higher in the output area than in inlet area. This conclusion will be utilized to design more efficient fuel cell modeling of real fuel cell operation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.425-425
• /
• 2012

유기물/무기물 나노 복합체를 사용하여 제작한 메모리 소자는 간단한 공정과 3차원의 고집적, 그리고 플렉서블한 특성을 가지고 있어 차세대 전자 소자 제작에 매우 유용한 소재이기 때문에 많은 연구가 진행되고 있다. 다양한 유기물 메모리 소자중에서 유기 쌍안정성 소자(organic bistable devices, OBD)의 전하 수송 메커니즘은 많이 연구가 되었지만, 트랩의 밀도와 분포에 따른 전기적 특성에 대한 연구는 미흡하다. 본 연구에서는 두 전극 사이에 나노 입자가 분산되어 있는 유기물 박막에 존재하는 트랩의 밀도와 분포로 인해 같은 인가전압에서도 다른 전도율이 나타나는 현상을 분석하였다. 하부 전극으로 Indium-tin-oxide가 코팅된 유리기판과 상부 전극인 Al 사이에 나노입자가 분산된 폴리스티렌 박막을 기억 매체로 사용하는 OBD를 제작하였다. OBD의 전기적 특성을 관찰하기 위하여 space-charge-limited-current (SCLS) 모델을 사용한 이론적인 연구를 실험 결과와 비교 분석하였다. 계산된 전류-전압 결과는 트랩 깊이에 따른 가우스 분포로 이루어진 개선된 SCLS 모델을 사용하였을 때 측정된 전류-전압 결과와 잘 일치 하였다. 낮은 인가전압에서 Ohmic 전류가 생기는 것을 개선된 SCLS 모델과 병렬저항을 사용하여 설명하였다. 이 연구 결과는 유기물/무기물 나노 복합체를 사용하여 제작한 OBD의 트랩의 밀도와 분포에 따른 전기적 특성을 이해하는데 도움을 준다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.545-545
• /
• 2012

집속이온빔장치(FIB: Focused Ion Beam System)에 사용하는 액체금속이온원(LMIS: Liquid Metal Ion Source)은 고 전류밀도, 고 휘도, 낮은 에너지퍼짐 등 많은 장점이 있다. 집속이온빔장치는 주로 표면 분석, 집적 회로의 수정, 마스크 교정(Repair) 및 잘못된 부분의 분석(Failure Analysis) 등에 사용되고 있는데 최근에는 고 분해능의 이온빔 리소그래피와 이온 주입의 기술 및 미세가공 기술 등의 분야에 집중되고 있으며 이를 위해서는 집속이온빔장치의 수렴성(Convergence)을 개선해 나가는 것이 중요하다. 집속이온빔장치의 수렴성은 이온빔의 에너지 퍼짐(Energy Spread)과 각 분포(Angular Distribution)에 많은 영향을 받으며 에너지퍼짐 특성은 색수차에 직접적인 영향을 준다. 수렴성을 개선하기 위해 기존의 에미터(Emitter), 저장소(Reservoir), 추출극(Extractor)으로 제작된 액체금속이온원에 서프레서(Suppressor)라는 새로운 전극을 사용하여 이 전극의 유 무에 따른 각 분포의 변화에 대해 연구하였다.