Browse > Article
http://dx.doi.org/10.3795/KSME-B.2012.36.2.161

Numerical Modeling of Current Density and Water Behavior at a Designated Cross Section of the Gas Diffusion Layer in a Proton Exchange Membrane Fuel Cell  

Kang, Sin-Jo (Dept. of Automatic System, Korea Polytechnics V College)
Kim, Young-Bae (Dept. of Mechanical Engineering, Chonnam Nat'l Univ.)
Publication Information
Transactions of the Korean Society of Mechanical Engineers B / v.36, no.2, 2012 , pp. 161-170 More about this Journal
Abstract
There are many factors to consider when attempting to improve the efficiency of fuel cell operation, such as the operation temperature, humidity, stoichiometry, operation pressure, geometric features, etc. In this paper, the effects of the operation pressure were investigated to find the current density and water saturation behavior on a cross section designated by the design geometry. A two-dimensional geometric model was established with a gas channel that can provide $H_2$ to the anode and $O_2$ and water vapor to the cathode gas diffusion layer (GDL). The results from this numerical modeling revealed that higher operation pressures would produce a higher current density than lower ones, and the water saturation behavior was different at operation pressures of 2 atm and 3 atm in the cathode GDL. In particular, the water saturation ratios are higher directly below the collector than in other areas. In addition, this paper presents the dependence of the velocity behavior in the cathode on pressure changes, and the velocity fluctuations through the GDL are higher in the output area than in inlet area. This conclusion will be utilized to design more efficient fuel cell modeling of real fuel cell operation.
Keywords
PEM Fuel Cell; GDL; Current Density; Operation Pressure; Saturation;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Kim, S. and Hong, I., 2007, "Effect of Flow Field Design on the Performance of a Proton Exchange Membrane Fuel Cell(PEMFC)," J of Ind. Eng. Chem, Vol. 13, No 5, pp. 864-869.
2 Ahn, D., Han, S., Kim, K. and Chi, Y., 2009, "Experimental Analysis for Variation of Pressure Difference on Flooding in PEM Fuel Cell at Cathode Channel Oulet," Trans of the Korean Hydrogen and New Energy Society, Vol. 20, No. 5, pp. 390-396.
3 Natarijan, D. and Nguyen, T.V., 2001, "A Two-Dimensional, Two-Phase, Multi-Component, Transient Model for the Cathode of a Proton Exchange Membrane Fuel Cell," J Electrochemical Soc. 148, A pp. 1324-1335.
4 Wang, Z.H., Wang, C.Y. and Chen, K.S., 2001, "Two Phase Flow and Transport in the Air Cathode of Proton Exchange Membrane Fuel Cell," J of Power Sources, Vol. 94 pp. 40-50.   DOI   ScienceOn
5 Okada, T., Xie, G. and Tanabe, Y., 1996, "Theory of Water Management at the Anode Side of Polymer Electrolyte Fuel Cell Membranes," J Electrochemical Chemistry, Vol. 413, pp. 49-65.   DOI   ScienceOn
6 Meng, H. and Wang, C.Y., 2005, "Model of Two-Phase Flow and Flooding Dynamics in Polymer Electrolyte Fuel Cells," J Electrochemical Soc. Vol. 152. A, pp. 1733-1741
7 Fuller, T.F. and Newmann, J., 1993, "Water and Thermal Management in Solid-Polymer-Electrolyte Fuel Cells," J Electrochemical Soc., Vol. 140A, pp. 1218-1225.
8 Nguyen, T.V. and White, R.E., 1993, "A Water and Heat Management Model for Proton-Exchange Membrane Fuel Cells," J Electrochemical Soc. Vol. 140A, pp. 2178-2186.
9 Gurau, V., Liu, H. and Kakac, S., 1998, "Two - Dimensional Model for Proton Exchange Membrane Fuel Cells," AIChE, Vol. 44, pp. 2410-2422.   DOI   ScienceOn
10 Garau, V., Fabir, F. and Liu, H., 2000, "An Analytical Solution of a Half-Cell Model for PEM Fuel Cells," J Electrochemical Soc. Vol. 147A, pp. 2468-2477.
11 Zamel, N. and Li, X., 2008, "A Parametric Study of Multi-Phase and Multi-Species Transport in the Cathode of PEM Fuel Cells," International Journal of Energy Research, Vol. 32, pp. 698-721.   DOI   ScienceOn
12 Zamel, N. and Li, X., 2010, "Non-Isothermal Multi-Phase Modeling of PEM Fuel Cell Cathode," International Journal of Energy Research, Vol. 34, pp. 568-584.
13 Meng, H., 2007, "A Two-Phase Non- Isothermal Mixed-Domain PEM Fuel Cell Model and Its Application to Two-Dimensional Simulations," Journal of Power Research, Vol. 168, pp. 218-228.
14 Hussaini, I.S. and Wang, C.Y., 2009, "Visualization and Quantification of Cathode Channel Flooding in PEM Fuel Cells," J of Power Sources, Vol. 187, pp. 44-451.
15 Kim, Y.B., 2011, "Study on the Effect of Humidity and Stoichiometry on the Water Saturation of PEM Fuel Cells," J Energy Research, DOI: 10.1002/er.1845.   DOI   ScienceOn
16 Quan, P. and Lai, M.C., 2007, "Numerical Study of Water Management in the Air Flow Channel of a PEM Fuel Cell Cathode," J of power Sources, Vol. 164, pp.222-237.   DOI   ScienceOn
17 Nguyen, T. and Knobble, M., 2003, "A Liquid Water Management Strategy for PEM Fuel Cell Stacks" J of power Sources, Vol. 114, pp. 70-79.   DOI   ScienceOn
18 He, W. and Yi, J. and Nguyen, T.V., 2000, "Two-Phase Flow Model of the Cathode of PEM Fuel Cells Using Indigitated Flow Fields," AIChE 46 A, pp. 2053-2064.