• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1117-1125
• /
• 2007

In this paper, a study has been performed on the design of small loop probe and analysis of induced electromagnetic wave signal from a smartcard for contactless cryptographic analysis. Probes for cryptographic analysis are different from conventional EM probes, because the purpose of proposed probe is to obtain the information for secret key analysis of cryptographic system. The waveform of induced voltage on probe must be very close to radiated waveform from IC chip on smartcard because electromagnetic attack makes an attempt to analyze the radiated waveform from smartcard. In order to obtain secret key information, we need to study about cryptographic analysis using electromagnetic waves, an approximate model of source, characteristic of probe for cryptographic analysis, measurement of electromagnetic waves and calibration of probes. We measured power consumption signal on a smartcard chip and electromagnetic wave signal using proposed probe and compared with two signals of EMA point of view. We verified experimently the suitability of the proposed small loop probe for contactless cryptographic analysis by applying ARIA algorithm.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.2
• /
• pp.83-90
• /
• 2009

White LEDs(Light Emitting Diode) offer advantageous properties such as high brightness, improved reliability, lower power consumption, and long lifetimes. An LED is an electronic device that converts an electrical signal into a tight signal and is used not only in Optical Communication Indoor wireless optical illuminating rooms, but also for wireless optical communication systems. Currently, studies about these white LEDs have been being progressed, and in this raper, we discuss the multiplex and the multiple access method of VLC(Visible Light Communication) systems using white LEDs. In proposed system, CDMA(Code Division Multiple Access) apples to VLC system to reduce interference of VLC system, and improve capacity. The superiority of OOK modulation is presented in analysis of results by comparing VLC-CDMA communication system using OOK(On-off keying) modulation and BPSK modulation in AWGN(Additive White Gaussian Noise) channel and Diffuse channel. And we investigate the significance of a solution of interference by multipath by comparing BER in multipath channel and AWGN channel. In the proposed system, we assume Directed LOS(Line Of Sight) and Diffuse Link, and suppose VLC-CDMA using OOC(Optical Orthogonal Code) as methods to increase efficiency of system by removing ISI(Inter Symbol Interference) caused by multiple access, optical spreading code, and also present an analysis of its performance.

• Journal of Digital Contents Society
• /
• v.19 no.9
• /
• pp.1689-1697
• /
• 2018

This paper explored how to design amobile application for Korea's traditional markets based on O2O service and data science technologies. In order to cover a broader scope of customers, diversify the ways to sell products, and increase the profits of Korea's traditional markets, the application bridges online customers with offline stores at traditional markets and augments both convenience and accessibility. Beyond the typical face-to-face interactions between customers and sellers at traditional markets, this application offers mobile payments and personalized recommendations of nearby stores and preferable products using Beacon and datascience technologies. Moreover, it offers multi-language support for foreign customers who are not familiar with Korea's traditional markets and the products sold there. In conclusion, using O2O service, which is a rising trend among prevalent platform technologies, this study proposed a new e-commerce model for Korea's traditional markets to promote market expansion.

• Science of Emotion and Sensibility
• /
• v.13 no.4
• /
• pp.721-732
• /
• 2010

As increasing of electrical device usage, social concerns about the possible effects of 60Hz electromagnetic fields (EMF) on human health have increased. The number of people with self-attributed electromagnetic hypersensitivity (EHS) who complain of subjective symptoms such as headache, insomnia etc. also increased. However, we don't know whether the EHS results from psychological factor or real perception to the electromagnetic field. In this study, we simultaneously investigated physiological changes(heart rate, respiration rate, heart rate variability, alpha and beta waves in EEG), subjective symptoms and perception accuracy to assess origins of subjective symptoms according to the EMF exposure. Experiment consists of real and sham sessions and 60Hz 12.5uT magnetic field was on(real) or off(sham) to 15 EHS and 16 nonEHS. As the results, EMF exposure did not have any effects on physiological parameters or subjective symptoms for both groups. There was also no evidence that EHS group perceived the EMFs correctly than the control group. Therefore, the origins of subjective symptoms is not the 60Hz magnetic field but psychological factors.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.6
• /
• pp.275-281
• /
• 2017

AlN is a promising material for wide band gap and high-frequency electronics device due to its wide bandgap and high thermal conductivity. AlN has advantages as materials for power semiconductors with a larger breakdown field, and a smaller specific on-resistance at high voltage. The growth of a p-type AlN epilayer with high conductivity is important for a manufacturing an AlN-based applications. In this paper, Mg doped AlN epilayers were grown by a mixed-source HVPE. Al and Mg mixture were used as source materials for the growth of Mg-doped AlN epilayers. Mg concentration in the AlN was controlled by modulating the quantity of Mg source in the mixed-source. Surface morphology and crystalline structure of AlN epilayers with different Mg concentrations were characterized by FE-SEM and HR-XRD. XPS spectra of the Mg-doped AlN epilayers demonstrated that Mg was doped successfully into the AlN epilayer by the mixed-source HVPE.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.2
• /
• pp.180-188
• /
• 2013

A W-band waveguide noise measurement system for calibrating noise sources was implemented and its basic characteristics were discussed. The measurement system consists of a commercial noise figure analyzer, a full W-band frequency converter, and a local oscillator. To measure the noise temperature of a noise source, the Y-factor method is generally used. Since the Y-factor method is based on the assumption that the receiving system is linear, linearity is one of important performance parameters of the measurement system. In this paper, the linearities for mixer, intermediate frequency(IF), and RF parts were evaluated to be 0.24 dB, 0.05 dB, and 0.20 dB, respectively. The noise figure of the measurement system evaluated is 5 dB to 17 dB in W-band. The measurement system can be used to measure thermal noise characteristics of electronic and electrical devices, equipments, and systems as well as to calibrate noise sources.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.4
• /
• pp.389-403
• /
• 2010

Titanium and gold-alloy abutments have been used for a long-time in the clinical situations, but the use of zirconia abutments also increased. This study was designed to compare and evaluate the microgap differences according to types of abutment and dynamic loading. Titanium abutment, zirconia abutment and gold-alloy abutment (UCLA plastic) were connected into titanium implants of external hexagonal structure US II ${\phi}$ $3.75{\times}11.5$ mm (Osstem Co., Seoul, Korea) with the tightening torque of 30 Ncm. A sine type dynamic loading of 25-250 N and $30^{\circ}$ inclination from long axis was applied for $10^5$ times. Using the SEM both before and after the loadings, implant-abutment interfaces were analyzed on the labial, palatal, mesial and distal surface. The microgaps before and after the loading were compared, no statistically significant difference was observed caused by the dynamic loading on the labial, palatal, mesial or distal surface. Statistically significant difference was observed between UCLA and titanium group and between UCLA and zirconia group on both before and after the loading(p<0.05). No statistically significant difference was found between titanium and zirconia group. Loadings for $10^5$ times did not show significant effect to the microgaps between implants and abutments.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2002.11a
• /
• pp.363-369
• /
• 2002

가정 내에서의 초고속망 이용이 활성화되면서 가정 내에서의 활동은 매우 다양하고 복잡하며 그에 따른 서비스도 여러 가지 형태가 존재한다. 외부 인터넷망과 연동되는 홈 네트워크의 개념이 생기기 전부터 흠 오토메이션, 홈시큐리티 등의 서비스를 제공하기 위한 고립적인 형태의 망과 서비스 제공 시스템이 있었다. 월드 와이드 웹 서비스를 기본으로 한 인터넷의 폭발적인 활성화와 고속 인터넷망의 확산에 따라 가정 내에서 제공되는 서비스를 인터넷과 연계시키려는 시도가 보편화되었고 가정 내에서 사용되는 독립적인 기기들을 인터넷에 연결하여, 외부의 정보를 이용해서 활용하거나, 가전내의 기기들을 외부에서 액세스할 수 있게 되었다. 이렇게 하여 보다 풍부한 서비스를 제공하고, 사용상의 시간적인 제약을 완화할 수 있다. 예들 들어 인터넷상에서 조리법을 전송받아 전자레인지를 작동할 수 있으며, 외부에서 잘못 켜둔 가스밸브를 잠글 수도 있다. 가정 내에서 wrhd되던 이러한 서비스들은 서로 다른 하드웨어와 통신방법을 사용하고 있어, 이러한 서비스를 통합하여 운영, 관리할 수 있도록 하는 흠 서버의 개념이 대두되었다. 외부 인터넷 망과 연계된 흠 오토메이션, 홈 시큐리티등을 제공할 수 있는 기반이 마련되었고, 가정 내에서 독립적으로 제공되던 서비스들을 단일 홈 서버를 통해서 관리하려는 시도가 진행되었다. 그러나 홈 서버는 개발하는 업체의 보유기술에 따라 중심기능은 약간씩 차이를 보이고 있다. 홈 서버 응용 영역은 전문 지식을 소유한 인력과의 연계가 필요하고, 다양한 서비스 영역 행위가 아주 복잡하기 때문에 이들을 연결해 주는 자치 시스템을 필요로 한다. 또한 홈 서버 서비스 영역에서 정보는 각 영역 전문가가 가진 지식의 전달을 필요로 하기 때문에, 지식을 주고받는 멀티 에이전트의 시스템의 활용 영역으로 적당하다. 멀티 에이전트 시스템은 분산된 환경에서 에이전트간에 에이전트 통신 언어를 사용해서 대화를 하기도 하고, 상호 협력하는 에이전트들로 구성된 시스템을 뜻하며 흠 서버처럼 동적이고 고도의 자치성을 요구하는 영역에 적당하다. 멀티 에이전트 플랫폼으로는 FIPA(Foundation for Intelligent Physical Agents)가 제시한 에이전트 표준 플랫폼이 1997년부터 2000년에 이르기까지, 계속적으로 변화, 발전하고 있다. 본 연구는 FIPA에서 제시하는 플랫폼을 기반으로 홈 서버에 정보가전을 제어하는 에이전트를 두고 외부에서 다른 에이전트가 홈 서버에 위치하는 에이전트와의 통신을 통하기 정보가전을 지능적으로 제어하도록 하였다. 정보가전 에이전트는 가정 내 가전제품을 외부에서 제어하기 위한 에이전트이다. 단순한 관리가 아닌 에이전트로 하여금 지능적으로 가전제품 관리를 하게 한다. 정보가전 에이전트는 홈 서버에서 작동하는 에이전트와 PDA에서 작동하는 에이전트로 구성된다. 정보가전 에이전트는 전력량, 수도 사용량 제어와 가전제품 제어 기능과 보안 관련 서비스를 제공한다. 두 에이전트는 FIPA에서 정의된 규격에 맞게 만들어지기 때문에 FIPA명세서를 따르는 다른 에이전트와 자유로운 통신이 가능하다.

• The Journal of the Korea Contents Association
• /
• v.13 no.2
• /
• pp.390-399
• /
• 2013

The purpose of this study is to examine the impact of enterprise R&D investment on inter-industry technology spillover in Korea under the new Normal Era. In order to do this, we tested the effect of production inducement, backward and forward linkage effects, and the effect of technology spillover such as technology intensity effects and technology diffusion effects based on an input-output framework. The results show that the high index industries of the production inducement effect were professional, scientific and technical activities, manufacture of metal products, and general machinery. Some manufacturers of other non-metallic mineral products and transport equipment sectors appeared to have the strong effect of forward and backward linkages that were almost equivalent to high-tech manufacturing industries. In particular, the industries of professional, scientific and technical activities appeared to have the strong effect of both forward and backward linkages. Therefore, we need to drive a strong policy support to higher enterprise R&D investment in the those particular industries not only to increase global competitiveness, but also to widen up the technology spillover effect on other industries.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.153-162
• /
• 2017

Weapon systems have been developed with high technology electronic equipment due to technology growth. In addition, the capital, operational and maintenance costs of weapon systems have all increased. However, cost of operation and maintenance for weapon systems has been decreased relatively compared to the increased capital cost of weapon systems. Therefore, the defense industry needs to research the life cycle cost of weapon systems that have high operational and maintenance costs. This paper focuses on maintenance equipment for the operation and maintenance of weapon systems. Recently, it seems that the weapon systems that have periodic calibration with maintenance equipment are valid. The equipment requires periodic calibration by the manufacturer to check its own validation. Basically, customers demand high reliability devices from foreign companies that have qualified in the global market. Therefore, the tools need to be calibrated overseas. In other words, weapon systems are not available when the equipment has to be calibrated overseas because the systems require validation with valid maintenance equipment. A purpose of this paper is to compare the loss costs that arise from the calibration of the equipment overseas and the purchasing cost of the tools. Finally, the research shows the number of equipment that customers need to minimize the cost. This research will help to improve the efficiency of operation of weapon systems and solve the problems associated with the need for maintenance overseas.