• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.533-541
• /
• 2007

The Zienkiewicz-Zhu(Z/Z) error estimate is slightly modified for the hierarchical p-refinement, and is then applied to L-shaped plates subjected to bending to demonstrate its effectiveness. An adaptive procedure in finite element analysis is presented by p-refinement of meshes in conjunction with a posteriori error estimator that is based on the superconvergent patch recovery(SPR) technique. The modified Z/Z error estimate p-refinement is different from the conventional approach because the high order shape functions based on integrals of Legendre polynomials are used to interpolate displacements within an element, on the other hand, the same order of basis function based on Pascal's triangle tree is also used to interpolate recovered stresses. The least-square method is used to fit a polynomial to the stresses computed at the sampling points. The strategy of finding a nearly optimal distribution of polynomial degrees on a fixed finite element mesh is discussed such that a particular element has to be refined automatically to obtain an acceptable level of accuracy by increasing p-levels non-uniformly or selectively. It is noted that the error decreases rapidly with an increase in the number of degrees of freedom and the sequences of p-distributions obtained by the proposed error indicator closely follow the optimal trajectory.

• Journal of vocational education research
• /
• v.37 no.3
• /
• pp.65-83
• /
• 2018

In this study, we want to analyze the aspect that required in the classroom for the operation of NCS-based curriculum, the interest of specialized subject teachers on implementable teaching and learning methods. As a result, the overall interest in teaching-learning method of specialized subject teachers was similar to that of non-user patterns among four types of interest patterns. In other words, specialized subject teachers want to know more about teaching-learning method for applying NCS-based curriculum, but we are only aware of the general facts at present, and it seems that there is low interest in actual operation. In addition, there was no statistically significant difference in the degree of interest in the teaching-learning method according to general variables(gender, related training experience, career, and curriculum group) of the specialized subject teachers. The specialized subject teachers are not well aware of the influence of the teaching-learning method according to the introduction of NCS-based curriculum, and to that end, there was little interest in collaboration with colleagues.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.620-626
• /
• 2021

The purpose of this study is to examine the characteristics and industrial structure and to present a future vision through analysis of industrial agglomeration, growth, and industrial efficiency targeting the Chungnam display industry nurtured by regional industrial policies since 2002. The industrial scale and aggregate status were analyzed through the business scale quotient and location quotient, and the growth and pace of structural change in the industry were analyzed through the industrial growth rate and change of industrial structure. Analysis results found the display industry shows its solid status based on industrial agglomeration. The RLQ, added value ratio, and employment coefficient have a relatively high comparative advantage. However, the growth rate has declined, and the pace of structural change has become lower. The regional competitiveness has been deteriorating. It is necessary to develop strategies to help the industry evolve into a convergence display industry to secure competitiveness by forming value chains. The regional industrial policy 'Regional Innovation Growth Plan' should be utilized to foster local industries that consider the regional characteristics and development directions and to promote the shared growth of related subsidiary industries through fostering specialized complexes for materials, parts, and equipment.

• Journal of the Korea Convergence Society
• /
• v.12 no.6
• /
• pp.183-195
• /
• 2021

This study compared and analyzed the trends of wellness-related tourism polices in Japan, which have policy similarities with Korea, through related literature research and online interview surveys amid growing demand for wellness tourism in Korea's wellness tourism policy implications. According to the survey, wellness tourism-related concepts do not differ particularly between Korea and Japan, and the use of health tourism or wellness tourism concepts is more common in Japan than healing tourism. Wellness tourism policy is analyzed to be more systematic in Japan in the areas of policy principal agent's flexibility, policy efficiency, related certification, and human resource development, and Korea in the driving force and institutional maintenance of policy. It was judged that Korea needs to establish a wellness tourism consultative body, such as the case of Japan, and improve efficiency through systematic certification of wellness tourism and qualitative management of related manpower. In order to industrialize wellness tourism, it is necessary to increase the healing effectiveness and product value of wellness tourism by organically linking wellness resources specialized by region, and to conduct in-depth analysis of the direction and strategies of wellness tourism policies in preparation for the post-Corona(COVID-19) Era and an empirical study of tourism sites.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.353-358
• /
• 2020

The new sales method of social commerce in food service market is growing steadily. Over 50 percent of the social commerce market is food service product. Food service companies are using social commerce, which is discount sales, as a marketing tool. There are many food service companies using social commerce as a sales and marketing tool. However, little research has investigated food service customers. Thus, this study suggests how food service customer's purchasing factor affects customer's satisfaction and loyalty of the supplier and business operator. Social commerce's purchasing characteristic factors are selected based on a previous study. Purchasing factor is divided into supplier and business operator side and the impact of the relationships between its subordinate factors (price discount, offering diversity, mutual action, brand intimacy) and customer's satisfaction is analyzed. As a result, price discount and brand intimacy show higher results. Offering diversity and brand intimacy of purchasing factor on business operator side shows a higher impact on the relationship between loyalty and ?? (Ed- 'the relationship between A and B'; what is B?). The study implications are as follows. The food service industry should establish different marketing strategies to apply social commerce and compare with social commerce business operators, because the actual place where customers use food service is food service restaurants and not just social commerce websites.

• Journal of Wetlands Research
• /
• v.18 no.3
• /
• pp.232-243
• /
• 2016

In order to establish the watershed water quality management strategy of Total Maximum Daily Load(TMDL), it is necessary to understand the relationship between water quality component impacts, and to identify the impacts on downstream target point of watershed water quality management of waste treatment plant(WTP) discharge and upstream/tributary loads. In this study, we determined the impacts between the water quality contaminants, and traced water pollution sources using monitoring data of ministry of environment in tributaries and main stream and WTP monitoring data. Test area is set to Geumho river basin which has characteristics of urban and rural area and composes of GeumhoA, GeumhoB, GeumhoC watershed units in TMDL. The clustering with five grades of discharge data and the correlation analysis were performed through the FDC(Flow duration curve) analysis, which more clearly identified the points and water contaminants deteriorating target water quality of downstream point. This can be used as a tool for tracing pollutants with FDC analysis, and will help us establish the watershed water quality management strategy for TMDL target point in watershed more effectively.

• Korean small business review
• /
• v.42 no.2
• /
• pp.117-137
• /
• 2020

We examine the current status of smart factory deployment and diffusion programs in Korea, and seek to promote manufacturing innovation from the perspective of SMEs. The main conclusions of this paper are as follows. First, without additional market creation and supply chain improvement, smart factories are unlikely to raise profitability leading to overinvestment. Second, new business models need to connect "manufacturing process efficiency" with "R&D" and "marketing" in value chain in smart factories. Third, when introducing smart factories, we need to focus on the areas where process-embedded technology is directly linked to corporate competitiveness. Based on the modularity-maturity matrix (Pisano and Shih, 2012) and the examples of U.S. Manufacturing Innovation Institute (MII), we establish the new smart factory deployment policy measures as follows. First, we shift our smart factory strategy from quantitative expansion to qualitative upgrading. Second, we promote by each sector the formation of industrial commons that help SMEs to jointly develop R&D, exchange standardized data and practices, and facilitate supplier-led procurement system. Third, to implement new technology and business models, we encourage partnerships, collaborations, and M&As between conventional SMEs and start-ups and business ventures. Fourth, the whole deployment process of smart factories is indexed in detail to identify the problems and provide appropriate solutions.

• Journal of Convergence for Information Technology
• /
• v.12 no.3
• /
• pp.85-107
• /
• 2022

This study is to analyze the induced effect, network connectivity, and network visualization of the water transportation industry on the overall economy in relation to all industries. For this, various inducement coefficients of the water transportation industry are analyzed using industry linkage analysis and unit structure matrix, and network visualization analysis is performed using network connectivity and NetDraw using Ucinet 6 that utilizes unit structure matrix and inverse matrix function. As a result of the study, analysis results of input coefficient, production inducement coefficient, value-added inducement coefficient, and inter-industry chain effect were presented as various inducement coefficients in the water transportation industry. content was presented. Through this study, the current position and status of the water transportation industry and its relationship with all industries were confirmed, and the strategic relationship with which industries it should be presented was presented. In the future, it is necessary to further analyze the current status and trends of various induced effects, connectivity (centrality), and network visualization analysis using industry-related analysis published since the 2000s.

• Journal of Korean Library and Information Science Society
• /
• v.54 no.4
• /
• pp.335-358
• /
• 2023

This study analyzed the characteristics of the learning organization according to its characteristics, the operation method and size of each public library. In addition, the service quality of public libraries was investigated so that it was also analyzed the correlation between the characteristics of the learning organization and the quality of the service. To achieve the research objectives, 83 librarians and 343 users across seven public libraries in South Korea's metropolitan areas were surveyed. The investigation covered various dimensions of learning organizations: creating continuous learning opportunities, promoting inquiry and dialogue, encouraging collaboration and team learning, creating systems to capture and share learning, empowering people toward a collective vision, connecting the organization to its environment, and providing strategic leadership for learning. Also it was investigated aspects of service quality: affect of service, information control, and library as place. As a result of the study, for the learning organization characteristics, more than 3.4 out of 5 were qualified to have foundation of learning organizations. One attempted to categorize according to its operational method and size and compare learning organization differences between public libraries, however it was not easy to see the clear differences. Therefore it was judged that there might be another unidentified factor which gives an affect on learning organization. Furthermore, it was found that there was a positive correlation between learning organization traits and service quality. This study might signify by looking into how the learning organization, which is one of the post-bureaucratic organizational traits, appears in public libraries.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1150-1155
• /
• 2006

대부분의 도시지역은 불투수면적 비율이 상당히 높은 특징으로 인한 유출용적 및 첨두유출량의 증가와 외수위보다 낮은 지반고의 지형학적 특징으로 인한 내수배제의 불량으로, 저지대의 침수위험도가 상당히 높다. 이러한 이유로, 빈도별 설계홍수량을 산정하여 침수위험지역을 파악하고 관리하는 공간적인 치수관리가 이루어지고 있지만, 효율적인 치수관리를 위해서는 공간적인 측면뿐 아니라, 침수위험지역 내 침수발생의 시간적인 측면도 고려하는 것이 필요하다. 본 연구에서는 침수위험지역 내 내수침수발생에 대하여 공간적.시간적으로 살펴보고, 내수침수발생 위험지역 및 우선관리지역을 선정하였다. 대상유역으로는 안양천 유역에서 대부분의 침수가 발생하는 서울시에 포함된 안양천 하류유역으로 하였다. 서울시에 포함된 안양천 하류지역에서 내수침수발생의 주원인으로는 외수위보다 낮은 지반고와 배수계통의 통수능력 부족으로 나타나고 있어, 이들 지역의 침수위험지역을 파악하기 위해 하도 및 관거의 유출해석에 우수한 SWMM 모형의 EXTRAN block을 이용하여 모의를 실시하고 맨홀이 월류되는 지역을 내수침수 위험지역으로 선정하였다. 각 빈도별 지속시간별 모의결과, 목감천 하류부의 고척 1동, 신월 1동, 화곡 2동, 도림천과 봉천천, 대방천이 만나는 구로동, 대림 1동, 대방동에서 침수가 발생하기 시작하였다. 이들 지역은 또한 10년에서 30년 빈도별 모의에서도 모두 침수위험이 높은 지역으로 선정되어, 우선관리지역으로 선정하였다. 우선관리지역의 선정은 홍수예.경보 측면에서는 주민의 신속한 대피와 같은 홍수대처능력과 치수관리측면에서는 소요되는 자원의 효율적 배분을 기대할 수 있을 것으로 판단된다. 대상으로 홍수범람모의시스템을 구축하여 분석결과를 피해지역주민 및 관련기관 실무자들에게 제공함으로써 시간과 공간에 구애받지 않는 재해관리와 신속한 재해 상황 대처가 가능해 질 것으로 사료된다.는 또 다른 형태의 주제도라고 볼 수 있으며, 이를 구축하기 위해서는 자료변환 및 가공이 필요하다. 즉, 각 상습침수지구에 필요한 지형도는 국립지리원에서 제작된 1:5,000 수치지형도가 있으나 이는 자료가 방대하고 상습침수지구에 필요하지 않은 자료들을 많이 포함하고 있으므로 상습침수지구의 데이터를 인터넷을 통해 서비스하기 위해서는 많은 불필요한 레이어의 삭제, 서비스 속도를 고려한 데이터의 일반화작업, 지도의 축소.확대 등 자료제공 방식에 따른 작업 그리고 가시성을 고려한 심볼 및 색채 디자인 등의 작업이 수반되어야 하며, 이들을 고려한 인터넷용 GIS기본도를 신규 제작한다. 상습침수지구와 관련된 각종 GIS데이타와 각 기관이 보유하고 있는 공공정보 가운데 공간정보와 연계되어야 하는 자료를 인터넷 GIS를 이용하여 효율적으로 관리하기 위해서는 단계별 구축전략이 필요하다. 따라서 본 논문에서는 인터넷 GIS를 이용하여 상습침수구역관련 정보를 검색, 처리 및 분석할 수 있는 상습침수 구역 종합정보화 시스템을 구축토록 하였다.N, 항목에서 보 상류가 높게 나타났으나, 철거되지 않은 검전보나 안양대교보에 비해 그 차이가 크지 않은 것으로 나타났다.의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상