• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.168-175
• /
• 2001

Reduction of structure-borne noise of the compartment in a car is an important task in automotive engineering. Transfer path analysis using vibroacoustic reciprocity technique or multiple path decomposition method has generally been used for structure-borne noise path analysis. These methods are useful in solving particular problem but do net quantify the effectiveness of vibration isolation of each isolator of a vehicle. To quantify the effectiveness of vibration isolation, the vibrational power flow has been used for a simple isolation system or a laboratory based isolation system. It is often difficult to apply the vibrational power flow technique to the complex isolation system like a car. In this paper, a simple equation is derived for calculation of the vibrational power flow of an isolation system with multiple isolators such as a car. It is successfully applied to not only quantifying the relative contributions of eighteen isolators but also reducing structure-borne noise of a passenger car. According to the results, the main contributor of eighteen isolators is the rear roll mount of an engine. The reduced structure-borne noise level is about 5dBA.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1092-1099
• /
• 2017

In this paper, we propose a novel geographical on-demand routing protocol for a mobile ad-hoc network (MANET) that resolves the broadcast storm problem of ad-hoc on-demand distance vector (AODV) routing protocol. The candidates relaying route request (RREQ) packet are geographically restricted by the locations of the destination and a (RREQ sender. Then, the duplicate RREQs, which are generally discarded in the protocols that follow the principle of the AODV, are parsed to avoid redundant RREQ rebroadcasts and to perform passive acknowledgement with respect to a RREQ rebroadcast. The proposed routing protocol is implemented by modifying the source code of the AODV in QualNet. It is shown through QualNet simulations that the proposed routing protocol significantly improves the packet delivery ratio and the latency of the AODV in high-density and heavy traffic network scenarios.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1991.04a
• /
• pp.7-9
• /
• 1991

차량 주행시 내부공간의 소음레벨의 변화를 "Booming"소음이라고 통칭하며, 이 소음의 주 원인은 엔진 회전수의 2차 하모닉(harmonic) 주파수 성분으로 구조적인 경로를 통하여 인체에 전달되게 된다. Booming 소음은 변화가 클 때 탑승자에게 큰 고통을 주며 차량 가치평가에 커다란 마이너스 요인이 된 다. 본 연구에서는 이러한 Booming 현상을 파악하고 대처하는 방법의 하나 로서 벡터해석법을 사용하고자 한다. 사용하고자 한다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.107-110
• /
• 1998

차량의 주요 소음원부터 실내 탑승자의 귀의 위치까지 도달되는 소음의 전달에 대한 전체적인 경로 및 주파수특성에 대한 해석은 차량의 구조-음향적인 특성이 복잡하므로 매우 어렵다. 그러나, 중-고주파수에 대한 대책에 있어서는 흡차음재가 유용함은 이미 알려진 사실이다. 차실 벽면에 사용된 흡/차음재는 소음레벨에 부분적인 기여를 함은 물론이고 음질에도 영향을 미친다. 소음 레벨에 있어서는 수백 Hz 이하의 저주파수 성분이 주요하며, 음질에는 중-고주파수 대역의 소음특성이 큰 영향을 미친다[1]. 본 논문에서는, 실험적으로 측정된 소음원의 특성을 수치해석 모델에 이용하여 소음레벨 저감과 음질개선을 위한 흡/차음재의 개선방향을 모색하였다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.12-12
• /
• 2017

본 연구에서는 롤러식 양파 파종기의 작동 특성 파악을 위한 동적 시뮬레이션을 수행하였다. 롤러식 양파 파종기의 주요부는 롤러와 포트트레이로 구성된다. 양파 파종기의 작동 특성 파악을 위해 동력전달 경로의 구성요소와 각 주요부의 속도를 분석한 결과 동력원인 모터의 출력은 체인과 스프라켓을 통해 포트트레이와 롤러에 전달되며 모터에서의 회전속도는 1770rpm으로 감속기를 통해 출력축의 회전속도는 17.7rpm으로 감소한다. 이론적으로 도출한 포트트레이의 이동속도는 74.98mm/s, 롤러의 회전속도는 22.13rpm으로 나타났다. 시뮬레이션을 수행하기 위해 스캐너를 이용하여 롤러식 파종기를 실측했으며 후에 3D모델링을 진행하였다. 시뮬레이션 해석조건은 파종기의 실제 작동방식을 고려하여 롤러1과 3은 포트트레이와 면대면 접촉을 통해 회전하도록 설정하였고 롤러2와 롤러4는 동력전달경로에 포함된 스프라켓과 기어의 잇수비를 반영하여 회전속도를 도출하여 적용하였다. 시뮬레이션 결과 롤러의 회전속도는 모두 22.13rpm으로 수식에 근거하여 도출한 값과 계측 값이 같음을 확인하였다. 또한 파종 깊이를 결정하는 요소인 롤러의 상토 압축 정도를 파악하기 위하여 롤러궤적 시뮬레이션을 통해 롤러 끝 단의 궤적을 분석하였는데 롤러궤적 분석 결과 롤러의 끝 단은 약 9.8mm 깊이로 내려가는 것을 확인하였다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.2 s.42
• /
• pp.59-69
• /
• 2005

Employing the classical beam theory for the design of welded steel moment connections has been brought into question by several researchers since the 1994 Northridge earthquake. In this study, the load transfer mechanism in various welded steel moment connections is comprehensively reviewed mainly based on recent studies conducted by the writer. Available analytical and experimental results showed that the load path in almost all the welded steel moment connections is completely different from that as predicted by the classical beam theory. Vertical plates near the connection such as the beam web, the web of the straight haunch, and the rib act as a strut rather than following the classical beam theory. The shear force transfer in the RBS connection is essentially the same as that in PN type connection. Some simplified analytical models that can be used as the basis of a practical design procedure are also presented.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.327-330
• /
• 2004

파워흐름해석법은 진동에너지 흐름 형태에 따른 에너지지배방정식을 이용하는 방법으로서, 진동에너지의 공간적인 분포와 전달 경로 등을 제시할 수 있는 방법이다. 이러한 파워흐름해석법은 고주파수 대역의 진동을 해석하기 위하여 효과적으로 적용될 수 있다. 본 연구에 서는 평판 구조물 진동에 대한 파워흐름해석법의 예측 결과를 실험 결과와 비교하여 분석하였다. 분석할 진동 특성들은 손실계수, 주파수 응답함수 등을 포함한다. 그리고 이러한 분석 결과로부터 파워흐름해석법이 고주파수 진동에 효과적으로 적용될 수 있음을 보였다.

• Journal of KSNVE
• /
• v.8 no.6
• /
• pp.1158-1165
• /
• 1998

Low frequency interior noise in cars is mainly due to structure-borne excitations which are related with road excitation and component vibrations such as suspension and engine mounts. In order to analyze the annoying interior noise. a technique (Transfer Path Analysis) is introduced to find a noise source and the path of that noise. In this study, TPA is reviewed theoretically and applied to investigate the case when the low frequency interior noise at front seat due to road excitations needs to be optimized. The subjective and objective appraisal was performed under the conditions that a testing vehicle traveled on asphalt at 30 km/h. so that the low frequency to be eliminated was detected. The related vibration and noise data for TPA were measured on running and static vehicle. The results reveal that the noise contribution along the z-direction of trailing arm is prominent to low frequency interior noise.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.12
• /
• pp.107-116
• /
• 2008

The excitation force of a powertrain is one of major sources for the interior noise of a vehicle. This paper presents a novel approach to predict the interior noise caused by the vibration of the power rain by using the hybrid TPA (transfer path analysis) method. Although the traditional transfer path analysis (TPA) is useful for the identification of powertrain noise sources, it is difficult to modify the structure of a powertrain by using the experimental method for the reduction of vibration and noise. In order to solve this problem, the vibration of the power rain in a vehicle is numerically analyzed by using the finite element method (FEM). The vibration of the other parts in a vehicle is investigated by using the experimental method based on vibrato-acoustic transfer function (VATF) analysis. These two methods are combined for the prediction of interior noise caused by a power rain. Throughout this research, two papers are presented. This paper presents a simulation of the excitation force of the power rain exciting the vehicle body based on numerical simulation. The other paper presents a prediction of interior noise based on the hybrid TPA, which uses the VATF of the car body and the excitation force predicted in this paper.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.12-22
• /
• 2007

This paper presents to predict the powertrain structure-borne noise which is primary resource of interior noise. As the first step, it is built up a hybrid powertrain model which is based on the real powertrain which is verified with static and dynamic properties. The methods for verifying are modal analysis and running vibration testing which are experimentally implemented. Based on the Hybrid powertrain component model, an initial predictive assembly model is simulated. As the second step, the characteristic transfer functions are measured that are dynamic stiffness of rubber mounts and vibro-acoustic transfer function based on the acoustic reciprocity. Several techniques utilizing special experimental devices have been proposed for this research. Finally, the structure-borne noise by powertrain will be predict and verify with dynamic simulation and experiment.