• Journal of the Korean Wood Science and Technology
• /
• v.37 no.4
• /
• pp.357-363
• /
• 2009

This study was carried out to investigate whether adhesive used in manufacturing glulam can be used to bond wood and GFRP, when considering working process and economical efficiency. The six different glulams were manufactured, changing the adhesives and the mixing ratios of the adhesives, and investigated by the block shear test and the delamination of the water soaking or boiling water soaking. The three glulams were manufactured, using the resocinol resin based adhesive, the PVAc resin based adhesive and the epoxy resin adhesive, and the other three glulams, using the adhesives mixing resocinol resin and PVAc resin. The block shear strength is higher than $7.1N/mm^2$ in all types, which is standard of KS F3021. However, in the wood failure the block shear strength was the highest as 65.9% in the PVAc. The delamination of glulams glued with PVAc adhesive, which was 1.08% in water soaking and 4.16% in boiling water soaking, was lower than 5.00% which is the standard of KS F 3021, and the adhesive strength is good. In glulams glued with only resocinol resin adhesive, the wood layers were good as 1.26% in the water soaking delamination and 0.00% in the boiling water soaking delamination. The GFRP layers were not good as 21.85% in the water soaking delamination but were good as 1.45% in the boiling water soaking delamination.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.8
• /
• pp.125-135
• /
• 2008

Rigid-soft particle mixtures, which consist of sand and rubber, are investigated for the understanding of the stress-deformation and elastic moduli. Specimens are prepared with various size ratio sr between sand and rubber particles, and different volumetric sand fraction sf. Small strain shear waves are measured under $K_o$-loading condition incorporated with the stress-deformation test by using oedometer cell with bender elements. The stress-deformation and small strain shear wave characteristics of rigid-soft particle mixtures show the transition from a rigid particle behavior regime to a soft particle behavior regime under fixed size ratio. A sudden rise of $\Lambda$ factor and the maximum value of the $\zeta$ exponent in $G_{max}=\;{\Lambda}({\sigma}'_{o}/kPa)^{\zeta}$ are observed at $sf\;{\approx}\;0.4{\sim}0.6$ regardless of the size ratio sf. Transition mixture shows high sensitivity to confining stress. The volume fraction for the minimum porosity may depend on the applied stress level in the rigid-soft particle mixtures because the soft rubber particles easily distort under load. In this experimental study, the size ratio and volumetric sand fraction are the important factors which determine the behavior of rigid and soft particle mixtures.

• The Journal of Engineering Geology
• /
• v.15 no.1
• /
• pp.9-17
• /
• 2005

A set of soil samples were picked up from a failed slope formed by rainfall in limestone zone in Jangseong-gun, Jeonnam, Korea, to find out its physical and mechanical characteristics for this study, and variation of safety factor depending on slope inclination was defined by analysing slope stability affected by rainfall. Decomposed limestone soil in the research area is composed of quartz, orthoclase, gibbsite, geothite, etc., with specific gravity of 2.73, and this soil is included in SC by unified soil classification system. Calcium ingredient decreased remarkably during weathering at its mother rock. Coefficient of permeability is 2.56×10/sup -4/ cm/ sec, similar to its value of silty clay. Cohesion decreases remarkably from 3.0 t/ ㎡ to 0.72 t/ ㎡, and Φ value of internal friction angle tends to decrease as it turns to be saturated soil from partial saturated soil in the shear test. To analyze slope stability affected by rainfall, it is reasonable to seek seepage depth with reference to rainfall＊ intensity. In the slope stability analysis, when the seepage depth is the larger, its safety factor is the less, which makes the slope unstable. Comparing with minimum safety factor, 1.5 of cut slope in consideration of the seep-age line, safety factor is found to be satisfactory only when inclination of cut slope of decomposed limestone soil is more than 1：1.2 slope at least considering rainfall. It is also found that decrease of cohesion has great effect on decline of safety factor of slope while partial saturated soil turns to be saturated soil.

• Food Science of Animal Resources
• /
• v.22 no.4
• /
• pp.337-342
• /
• 2002

This study was carried out to investigate the feeding effect of by-products such as ginseng loaves(GL) and stem (GS) which had about 8% of crude saponin on pork carcass and meat quality characteristics when they were fed for 40 days. The ginseng leaves and stem were added in feed and the pigs were slaughtered at 10, 20, 30 and 40 days. The chilled carcass weight and trimmed fat contents were higher(86.50 kg) in the pork fed for 40 days. The yields of fore legs were higher in pork fed for 10 days(P<0.05) and there was no different in the yields of the other portion cuts such as shoulder, rib, loin, belly, hind legs and tenderlons. The incidence of percentages for grade A and B decreased as the feeding periods increased up to 40 days. The backfat thickness was lowest in carcasses from pigs fed up to 20 days(P<0.05). The L values were highest in pork fed up to 30 days(50.22) and lowest(46.91) for pork fed 10 days. The incidence of PSE pork was low in pork fed for 20 days when compared to other feeding days. Cooking loss was lowest and water holding capacity(WHC) was highest in pork fed GL and GS stem, respectively. However, the analysis for accumulation contents of saponin and functionality in pork fed GL and GS is needed in the future research.

• Journal of Animal Science and Technology
• /
• v.49 no.4
• /
• pp.523-530
• /
• 2007

A total of 127 Korean native black pigs(gilt 30, boar 97) were used to investigate the carcass properties, yields of retail cut and meat quality. The average live weight, chilled carcass percentage and retail cut percentage used in this study were 74.69kg, 71.14% and 61.09% for boar, and 75.5kg, 73.88% and 56.25% for gilt, respectively. Although gilts were higher in live weight and chilled carcass percentage whereas lower in retail cut percentage when compared to boars, there was no significantly difference between gender(p<0.05). Gilts had higher fat contents than boars regardless of weight range groups. Protein contents increased as slaughter weight increased for gilt and boar groups. Gilts contained high intramuscular fat contents had significantly lower Warner-Bratzler shear force(WBS) and water holding capacity(WHC) when compared to boar in the same weight range group(p<0.05). There was no significantly different in meat color(p>0.05) although gilts had higher L(lightness), a(redness) and b(yellowness) values when compared to the same group of boar. From the result of this study can be used for the grading guideline and quality evaluation standard of Korean native black pigs by gender and live weight.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.3
• /
• pp.27-33
• /
• 2009

A computational study has been performed out to evaluate the effect of a vertical porous barrier on the pressure oscillations in a supersonic cavity. The porous barriers with different perforations were vertically installed into a rectangular cavity at Mach numbers 1.50, 1.83 and 2.50. TVD finite difference MUSCL scheme was employed to solve the two-dimensional, unsteady, compressible Navier-Stokes equations. The present vertical porous barrier considerably altered the characteristics of the time-dependent shear layers that occur at the upstream edge of cavity and remarkably reduced the pressure oscillations inside the supersonic cavity. The present results showed that the effectiveness of passive control using the present porous vertical barrier is dependent on Mach number and the perforation of the porous barrier.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.44-44
• /
• 2001

최근들어 환경보호, 자원절약 및 산업의 경제성 확립을 위하여 전세계적으로 자원의 재활 용에 대한 일반 대중의 관심이 고조되고 있으며, 이와 때를 같이하여 각종 재활용 촉진을 위한 법규와 제도가 강화되어가고 있다. 이러한 분위기는 제지산업 분야의 경우 재생펄프 의 사용량 증가로 나타나고 있다. 그 동안 고지를 주된 원료로 사용하던 신문지, 판지 및 라이너지 등의 지종은 고지 사용 비율을 점차 높혀가고 있으며 천연펄프를 주된 원료로 이용하던 고급 인쇄용지와 화장지 분야에도 재생펄프의 사용이 시도되거나 확대되고 있 다. 아울러 전 지종에 걸쳐서 고수율 펄프의 활용 증대를 통한 산림자원 보호 및 경제성 확립에도 많은 노력이 경주되고 있다. 이러한 고지 및 고수율 펄프의 이용 증가 추세는 단 순한 경제적 이유에서 뿐만이 아니라 갈수록 강화되고 있는 환경보전과 자원절감을 달성 하기 위해서 지속되리라고 판단된다. 재생펄프의 이용과 함께 날로 엄격해지는 폐수 배출 규제와 관련하여 제지 공정을 폐쇄 화 방안이 적극 검토되고 있거나 실제로 적용되고 있다. 이에 따라 초지계의 백수 조건이 악화되고 있으며 앞으로 이러한 추세는 심화될 것이 자명하다. 이러한 백수계의 오염은 각종 첨가제의 기능 저하를 유발시키므로 공정 폐쇄화에 대처할 수 있는 새로운 기능성 보류시스템의 개발이 선행되지 않는다면 보류되지 못한 첨가제 혹은 미세분이 초지계를 오염시키는 악순환이 거듭될 것이 자명하다. 따라서 고지 재활용 및 공정 폐쇄화에 적극적으로 대처하기 위해서는 변화되는 원료 및 용수 조건에 능동적으로 대처할 수 있는 새로운 기능성 보류시스템으로서 전분과 마이크 로파티클로 구성된 보류 시스템을 검토하였다. 특히 마이크로파티클 시스템의 구성요소의 하나인 양성전분의 개질에 따른 효과를 평가하기 위해서 다양한 종류의 양성전분을 준비 하고 그 사용에 따른 미세분 보류도, reversibility 등을 측정하였다. 특히 reversibility를 측정함으로써 제지공정상에서의 전단력에 의한 응집에 파괴이후의 재응집 능력을 평가하 였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.309-314
• /
• 2012

Flame flickering occurs mainly because of the buoyancy force for pool fires under ambient air. The cup-burner flame was used for experimental investigation of the effect of the oxidizer velocity on the gravitational instability. The results showed that the flickering frequency decreased with increasing oxidizer velocity. The frequency-buoyancy relation with nondimensional variables coincided with that of the buoyant flume and pool fires when the characteristic velocity was defined as the difference between the fuel and oxidizer velocities, which implies that the origin of the gravitational instability is the Kelvin-Helmholtz instability in the shear layer. The effect of the oxidizer composition on the instability was also examined through nitrogen dilution in the oxidizer stream. As the concentration of inert gas increased, the length of the blue flame increased and lift-off behavior was observed. The oscillation frequency was independent of the dilution ratio, but was related to the local flame structure.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.5
• /
• pp.406-412
• /
• 1992

Changes in proximate composition and protein quality were determined to find out appropriate processing conditions of the seasoned and smoked squid(Neon flying squid, Ommastrephes bartrannii). Moisture and crude protein contents were severely reduced (p<0.05), while increasing of fat and ash contents were not apparent. Seasoning and smoking contributed iii enhancing TBA value. Trypsin inhibitor(Tl) content was not increased severely after those processing steps. TI content checked in the all steps of squid processing was not correlated with the TBA value of squid in the same processing step. An improved digestibility and protein efficiency ratio(PER) were observed in the all products except with steak(mechanically soften product) in vitro enzymatic digestibilities of both raw Neon flying squid meats(mantle and arm) were significantly inferior(p<0.05) to other squid species.

• Journal of the Korean Magnetics Society
• /
• v.4 no.3
• /
• pp.219-225
• /
• 1994

The alignment of Sr-ferrite magnetic powders, which is usually related to the fluidity and the applied magnetic field, is investicated in the anisotropic Sr-ferrite / resin-bonded permanent magnets. The magnetic powder alignment is observed to increase with the applied magnetic field and the fluidity which is a function of molding temperature and powder packing ratio. The best magnetic powder alignment is achieved at the following conditions; Sr-ferrite packing ratio of 56vol%, apparent viscosity of about 3000 poise in $1000sec^{-1}$ shear rate, and applied magnetic field of about 5kOe. The degree of preferred orientation of the magnetic powders in the field direction, as determined by the dc hysterisis graphs, is 84~85% (0.84~0.85). This result is in agreement with the value of 0.85 obtained by the X-ray experiments in the $2{\theta}$ range of ${23~40}^0$. The best magnetic properties obtained are:2.2kG of remanent flux density, 2.2MGOe of maximum energy product.