• 제목/요약/키워드: 전단병형

검색결과 6건 처리시간 0.021초

적층판의 원통형 굽힘에 대한 횡방향 전단병형 (Transverse Shear Deformation in the Cylindrical Bending of Laminated Plates)

  • 이수용;박정선
    • 대한기계학회논문집A
    • /
    • 제24권11호
    • /
    • pp.2696-2704
    • /
    • 2000
  • This paper presents a new laminated plate theory for the cylindrical bending of laminated plated. The theory assumes that in plane displacements vary exponentially through plate thickness. Analytical solutions are derived for simply supported plates subjected to transverse loading. The accuracy of the present theory is examined for unsymmetric laminates, and the numerical results are compared with three-dimensional elasticity solutions of Pagano. The present theory predicts displacements and stresses for very thick plates very accurately. In particular, transverse shear stresses obtained form constitutive equations are predicted very accurately.

동하중을 받는 복합재료 원통셸의 동적거동 해석 (On the Dynamic Response of Laminated Circular Cylindrical Shells under Dynamic Loads)

  • 이영신;이기두
    • 대한기계학회논문집
    • /
    • 제17권11호
    • /
    • pp.2684-2693
    • /
    • 1993
  • The free vibration and dynamic response of cross-ply for CFRP and GFRP laminated circular cylindrical shells under dynamic loadings are investigated by using the first-order shear deformation shell theory. The modal analysis technique is used to develop the analytical solutions of simply supported cylindrical shells under dynamic load. The analysis is based on an expansion of the loads, displacements and rotations in a double Fourier series which satisfies the and boundary conditions of simply support. Analytical solution is assumed to be separable into a function of time and a function of position. In this paper, the considered load forces are step pulse, sine pulse, triangular(1, 2, 3) pulse and exponential pulse. The solution for a given loading pulse can be found by involving the convolution integral. The results show that the dynamic response are governed primarily by the natural period of the structure.

전단변형을 고려한 정다각형 단면 기둥의 좌굴하중 및 후좌굴 거동 (Buckling Loads and Post-Buckling Behaviors of Shear Deformable Columns with Regular Cross-Section)

  • 이병구;이태은;권윤실;김선기
    • 한국강구조학회 논문집
    • /
    • 제13권6호
    • /
    • pp.683-691
    • /
    • 2001
  • 이 논문은 전단변형을 고려한 일정체적 기둥의 좌굴하중 및 후좌굴 거동에 관한 연구이다. 본 연구에서 해석대상 기둥은 일정체적을 갖고 길이가 항상 일정한 변단면 탄성기둥을 택하였다. 실제의 이론 전개에서는 변단면의 단면깊이가 직선, 포물선, 정현식으로 변화하는 정다각형 단면의 변단면 기둥을 채택하였다. 일정체적 변단면 기둥의 후좌굴 거동을 지배하는 상미분방정식을 유도하고, 유도된 미분방정식을 수치해석할 수 있는 컴퓨터 프로그램을 개발하였다. 주어진 기둥의 수치해석 해를 얻기 위하여 Runge-Kutta법을 사용하여 상미분방정식을 수치적분하고, 기둥의 미지수인 좌측 단부에서의 회전각 및 좌굴하중은 Regula-Falsi법을 이용하여 산출하였다.

  • PDF

세장한 철근콘크리트 보의 병형기초 전단강도 모델 (Deformation-Based Shear Strength Model for Slender Reinforced Concrete Beams)

  • 최경규;박홍근
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
    • /
    • pp.391-394
    • /
    • 2005
  • A theoretical model was developed to predict the shear strength of slender reinforced concrete beams. The shear force applied to a cross-section of the beam was assumed to be resisted primarily by the compressive zone of intact concrete rather than by the tensile zone. The shear capacity of the cross section was defined based on the material failure criteria of concrete: failure controlled by compression and failure controlled by tension. In the evaluation of the shear capacity, interaction with the normal stresses developed by the flexural moment in the cross section was considered. In the proposed strength model, the shear strength of the beam and the location of the critical section were determined at the intersection between the shear capacity and shear demand curves. The proposed strength model was verified by the comparisons to prior experimental results.

  • PDF

적층복합평판을 위한 고차해석이론 (A Higher-Order Theory for Laminated Composite Plates)

  • 신용석
    • 대한기계학회논문집
    • /
    • 제18권1호
    • /
    • pp.65-76
    • /
    • 1994
  • A higher-oder laminated plate theory including the effect of transverse shear deformation is developed to calculate the gross response and the detailed stress distribution. The theory satisfies the continuity condition of transverse shear stress, and accounts for parabolic variation of the transverse shear stresses through the thickness of each layer. Exact closed-ply laminates are obtained and the results are compared with three-dimensional elasticity solutions and a simple higher-order theory solutions. The results of the present work exhibit acceptable accuracy when compared to the three-dimensional elasticity solutions.

경사도변화 계측을 통한 백제 송산리 고분군의 지하 벽체거동특성과 안정성 (Characteristics of Subsurface Movement and Safety of the Songsanri Tomb Site of the Baekje Dynasty using Tiltmeter System)

  • 서만철;박은주
    • 지질공학
    • /
    • 제7권3호
    • /
    • pp.191-205
    • /
    • 1997
  • 백제 시대의 대표적인 문화재들이 다수 출토된 무령왕릉을 포함한 송산리 고분군에 대한 고분벽체의 거동을 장기적으로 계측하여 분석하였다. 본 연구는 송산리 고분군의 안정성을 판단하여 보존대착을 수립하기위한 목적으로 이루어졌으며, 각 고분의 중요지점에 총 11개의 2축 경사변화측정센서를 설치하고 매 20분마다 자동계측하여 약 15개월 동안 (1996년 7월 14일~1997년 9월 30일) 관측을 실시하였다. 무령왕릉의 벽체거동은 연도입구의 호벽이 최대거동을 보여 직각변위(N-S Tilt) 성분이 2.3mm/m/yr로 남쪽방향인 전실쪽으로 거동하고 있는 것으로 밝혀졌다. 무령왕릉 현실 서측벽의 남쪽 등 상감 상부의 벽돌이 1971년 발굴 이후 남쪽으로 기울어진 병형을 보이며 고분구조가 남쪽 방향으로 거동함을 증명하고 있다. 현실 동측벽의 거동 또한 1.523mm/m/yr로 현실 내부로의 거동이 심한편이다. 더구나 우기에는 그 변위가 약 2배에 달하는 것으로 판단되어 고분군 주위의 지반이 침투수에 노출되는 우기에는 고분의 구조안전에 심각한 문제가 있는 것으로 판단된다. 5호분은 전체적으로 벽체의 전후방향 거동이 벽체의 전단방향 변위보다 크게 나타난다. 또한 틸트의 급격한 불연속은 없고 일정한 방향으로 계속적인 미약한 변동을 보이고 있다. 6호분 역시 건기의 최대 거동 수치가 8.8mm/m/yr로써 다른 고분의 우기시의 거동수치를 훨씬 초과한다. 고분벽체의 대.소의 변형 사건은 강수 및 온도변화와 밀접한 관련성이 있는 것으로 밝혀졌다. 온도변화에 의한 벽체거동의 영향은 고분내의 온도가 급격히 상승할 때는 온도가 일정하게 유지될 때보다 거동 비율이 훨씬 크다. 상승했던 온도가 다시 하강되면 벽체는 온도가 상승하기 전의 상태로는 돌아가지 않고 잔여변형을 발생시켜 영구변형으로 남게 되는 이력현상을 보이고 있다. 또한, 무령왕릉 주변의 지하수위 관측 결과 현재 고분축조부지의 배수체계가 원지반보다 불량함을 의미하여, 불량한 배수체계는 고분의 구조안전에 영향을 미치는 것으로 판단된다. 이와같이 고분군에 발생한 모든 변위들은 발굴 후 인위적인 환경변화와 지속적인 강우침투의 영향과 배수불랴으로 인한 주변지반 및 내벽의 물성치의 저하로 인하여 고분의 내벽에 상당량의 변위가 발생한 것으로 판단된다. 무령왕릉 벽체거동 특성 분석 결과 무엇보다 강우침투 및 지아수유입을 막는 차수대책이 시급하며, 고분내에 있는 제습기에 의한 상승효과흐 제거하여야 할 것으로 판단된다.

  • PDF