• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.301-304
• /
• 1997

Effects of volatile impurities on deterioration characteristics of XLPE were investigated. Block type plate with needle-plane electrode and artificial void filled with $N_2$gas or humidity was subjected under high electric field. The dyed region by oxidation reaction around the artificial void filled with humidity was detected before tee initiation. Electrical tree was started from the tip of void filled with $N_2$gas earlier than humidity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.234-235
• /
• 2006

In this study, we experimented deterioration characteristics of PVC insulation wires for electrical apparatus by series arcing and analyzed the heat generation at the contacts of wires, glowing/growing process of copper oxide, waveforms of contact voltage, current, power dissipation, and so on. We found out that how glowing contacts and surface arcing can decompose PVC insulation and that subsequent series arc can lead to ignition. We expect that these results are useful for improving fire protection technology by providing a better understanding of how electrical fires can initiate.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.6
• /
• pp.65-70
• /
• 1995

This paper describes the detection of the ultrasonic signals reduced by materials of a transformer for diagnosis of the transformer using ultrasonic signal which is generated by partial discharge. When partial discharge is generated on the surface of the winding and between the winding and the core in the transformer, the ultrasonic signal can be measured as the proper selection of the ultrasonic detectors' location.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1785-1787
• /
• 2000

This paper present the result of the investigation, the electric properties of insulators due to non-soluble contamination. In general, the humidity and the amount of soluble salts such as NaCl, $MgCl_2$ are the most dominant factor. Though the non-soluble do not distribute on conductivity of contaminant layer, that has the hygroscopic property. For this study, we make a mini-fog chamber with transparent acryl and the kaoline was used for non-soluble contaminant. The kaoline was applied with sprayer to get the specific ESDD and NSDD value, then the specimen was dried and installed horizontally. And to measure the leakage current a DAS system was developed with LabView. With the result, we could know the influence of non-soluble content and the relationship between NSDD and ESDD.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.691-695
• /
• 2000

This paper present the result of the investigation, the electric properties of insulators due to non-soluble contamination. In general, the humidity and the amount of soluble salts such as NaCl, MgCl$_2$are the most dominant factor. Though the non-soluble do not distribute on conductivity of contaminant layer, that has the hygroscopic property. For this study, we make a mini-fog chamber with transparent acryl and the kaoline was used for non-soluble contaminant. The kaoline was applied with sprayer to get the specific ESDD and NSDD value, then the specimen was dried and installed horizontally. And to measure the leakage current a DAS system was developed with LabView. With the result, we could know the influence of non-soluble content and the relationship between NSDD and ESDD.

• Fire Science and Engineering
• /
• v.33 no.2
• /
• pp.114-123
• /
• 2019

The paper relates to a study on the changes in performance of insulation sheath resulting from accelerated degradation of IV and HIV insulated wire. To assume insulation degradation of IV and HIV insulated wire, accelerated life tests using Arrhenius equation were conducted among accelerated life test models, and experimental samples of 0 year, 10 years, 20 years, 30 years, and 40 years in equivalent life were produced. Whereas the maximum tensile load were increased as accelerated degradation of IV and HIV insulated wire progressed, elongation percentage, rupture time, and flexibility of insulated wires were found to be gradually reduced. According to the additional surface analysis results for the insulated wires per equivalent life using a scanning electron microscope, mechanical properties of the insulator were observed to be reduced as insulation degradation resulting from aging progressed since phenomena such as formation of crystalline structures and perforation, etc. occurred on the sample surface with progression of accelerated degradation. Consequently, institutional replacement of insulated wires and preparation of repair times considering performance degradation of the insulator installed inside buildings are considered necessary in order to prevent in advance the risks of electrical fire resulting from degradation in insulation performance.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.1
• /
• pp.22-29
• /
• 2000

This paper deals with the dielectric characteristics of $SF_6$ gas gap stressed by $\pm$1.2/44[$mutextrm{s}$] non-oscillating impulse and $\pm$0.4[$mutextrm{s}$]/1.14[MHz] oscillating impulse voltages in the presence of a needle-shape metallic particle in gas-insulated switchgear(GIS). Breakdown voltage-time (V-t) and breakdown voltage-gas pressure (V-p) characteristics were investigated and discussed. The experiments were carried out under highly inhomogeneous field geometry with a needle protrusion whose length and radius are 10[mm] and 0.5[mm], respectively. The gas pressure ranges from 0.1 to 0.5[㎫]. As a result, it was found that the electrical breakdown for both the positive and negative polarity develops with steplike pulses in leader mechanism, When subjected to the positive oscillating impulse voltage, the minimum breakdown voltages appeared in all the gas pressure ranges and the V-t curves have a pronounced upturning at short times to breakdown and give a little dependence of the gas pressure. On the other hand, in the case of the negative polarity the dependence of the V-t and V-p characteristics on the wave shape of the applied voltages is known to be appreciable.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1385-1386
• /
• 2007

전통적으로 초고압 지중케이블 접속함으로 현장에서 절연을 형성하여 전기적 성능을 유지하는 TMJ(Tape Molded Joint), TJ(Taped Joint), EMJ(Extruded Molding Joint) 및 공장에서 절연물을 가공하여 현장에서 조립만으로 설치를 완료하게 되는 PJ(Prefabricated Joint), PMJ(Pre-Molded Joint) 등이 사용되어 왔다. 최근에 PMJ에 사용되는 재료의 발전과 PMJ의 조립시간 단축, 원가 절감 및 공장 출하시 검사에 의한 신뢰성 향상으로 지중케이블 접속함 시장에서 PMJ의 비중이 점차 확대 되어가고 있다. 이에 당사는 이미 230kV급 PMJ의 개발을 완료하였으며, 이러한 기술적 배경을 바탕으로 현재 PMJ로서는 세계에서 최고 전압급에 속하는 400kV급 PMJ의 개발을 완료하게되었다.

• Applied Chemistry for Engineering
• /
• v.25 no.3
• /
• pp.254-261
• /
• 2014

The transformer is a static electrical device that transfers energy by inductive coupling. Then, heat is occurred at coils, inner transformer was filled with insulating oils for cooling and insulation. Although mineral oil as insulating oil has been widely used, it does not meet health and current environmental laws because it is not biodegradable. Therefore, in this study, the diglycerol ester was synthesized with diglycerol and fatty acids (oleic acid and caprylic acid) over various catalysts for insulating oil having biodegradability, high flash points and low pour points. The sulfated zirconia ($SO_4{^{2-}}/ZrO_2$) catalyst prepared at different calcination temperature shows the highest conversion of fatty acids at $600^{\circ}C$ due to crystallinity and high density of acid sites per surface area. When the molar ratio of oleic acid and caprylic acid is 1:3, the diglycerol ester shows superior insulation properties that are the flash point of $306^{\circ}C$ and pour point of $-50^{\circ}C$. The insulation properties of synthesized diglycerol ester shows the pour point of $-50^{\circ}C$ and the flash point of over $300^{\circ}C$. Therefore, diglycerol ester is superior to the vegetable oils in insulation properties.

• Tribology and Lubricants
• /
• v.10 no.1
• /
• pp.1-9
• /
• 1994

어떤 유체는 전기장에서 순간적으로 고체화한다. 이러한 다변형의 물질은 더욱 신속하고 적절한 기계의 앞날을 약속하고 있다. T-1000 (영화 터미네이터2; 심판의 날에서 생동하는 거의 불멸의 로보트)는 능숙하게 액체에서 고체로 변환다. T-1000은 총탄으로 관통되었을 때, 로보트의 액체-금속 피부는 관통된 구멍으로 흘러 들어가고, 산산조각이 났을때 T-1000은 녹아버린 후에 다시 제원형으로 응결된다. 전기유변성 유체는 이 영화제작자의 상상력에 어느 정도 적용될 수 있을 것이다. 전기유변성 유체는 전기장이 있는 곳에서 변형을 일으키는 물질이다. 주어진 전기장의 세기에 따라 전기유변성 유체는 물처럼 자유롭게 흐르기도 하고, 꿀처럼 진득하게 흐르기도 하며 제라틴처럼 고체화하기도 한다. 참으로 물질이 수천분의 일초사이에 한상태에서 다른 상태로 변할 수 있는 것이다. 전기유변성 유체는 만들기 쉽다; 절연액체에 미시적 입자가 분산된 것이다. 그러나 아직은 상업용으로 쓰이지 못하고 있다. 여러가지 문제점 중의 하나가 고체로서는 구조적으로 약하고, 또, 액체로서는 마찰성이 문제이며, 특히 고온에서는 화학적으로 불안정하다는 것이다.