• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.2
• /
• pp.87-91
• /
• 2015

As negative effects of climate change have been visualized and its direct damages to economy have been realized, the global efforts to respond to climate change by reducing greenhouse gas emission were accelerated. Korea's Carbon Footprint Labeling gets a lot of attention as one of the effective methods to contribute to national GHG reduction goal, and for enterprises to show customers how much effort the company put into global warming prevention. Consumers' interest on low-carbon products has been increasing. This study uses Life Cycle Assessment method to calculate the amount of carbon emission of dishwashing detergent, LG Household & Healthcare, which reduced carbon emissions by using raw materials that has relatively lower environment load. Life Cycle Assessment Method is based on guidelines of Carbon Footprint Labeling, Ministry of Environment, and pre-manufacturing, manufacturing, and disposal phase are included while use phase of the product is excluded from assessment. In order to understand the effects of eco-design on carbon emissions, the dishwashing detergent's carbon emissions are compared before and after the change of main raw materials. The result shows the improvement from $0.47kgCO_2eq/kg$ to $0.38kgCO_2eq/kg$ per product, and this means the main raw materials' carbon emissions could be reduced by around 9.4%, which is equivalent to 916tons of GHG emissions per year.

• Food Science of Animal Resources
• /
• v.33 no.5
• /
• pp.640-645
• /
• 2013

The purpose of this study was to utilize the results as a basic data of benzoic acids in animal products that didn't mention in the quality standard of National Veterinary Research and Quarantine Service (NVRQS) to solve the conflict of international trade and administration. Set-Pak method listed in the quality standard of NVRQS, faster than auto distillation methods with same recovery selected as a pre treatment for the determination of benzoic acid. The regression curve of benzoic acid with Sep-Pak method was linear with the $R^2$ value of 0.999 and the limit of detection (LOD) and limit of quantitation (LOQ) was 0.058 mg/kg and 0.176 mg/kg, respectively. The benzoic acid in the fermented milk was detected after the fermentation stage by addition of starter culture with the level of 2.28~10.48 mg/kg and 0~16.5 mg/kg in the commercial fermented milk products without detection by the addition of syrup. In case of cheese products, the benzoic acids level was influenced by the curd formation (Camembert cheese) and the quality of natural cheese (processed cheese), by the way, the benzoic acid level of commercial natural cheese was 0~4.2 mg/kg, processed cheese was 0~20.8 mg/kg, respectively. Based on this result, it may be possible to utilize as a basic data for the systematic control the level of natural benzoic acids in raw material, processing and final products of animal origin.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.3
• /
• pp.201-210
• /
• 2022

Expanded polystyrene (EPS) is the most commonly used fresh food refrigeration insulation in Korea and Europe. Moreover, as the use of disposable packaging materials has increased significantly along with non-face-to-face delivery services since the COVID-19 crisis, social issues related to waste disposal are also being raised. Therefore, in this study, the life cycle of EPS boxes for fresh food is focused on the factors that have a large difference between incineration and landfill including recycling in Europe and Korea in the disposal process after use, and raw materials and energy in the manufacturing process, which account for a large portion of the environmental impact value. We tried to compare the environmental impact of evaluation. Overall, the raw material production stage, box manufacturing stage, and packaging stage have similar processes in Europe and Korea, but unlike Europe, Korea, which lacks landfills and incineration facilities, has focused on expanding the recycling rate. It was necessary to do an environmental impact assessment. Data affecting the environment were derived based on 2019 and 2020 data for Korea and 2017 and 2020 data for Europe. In order to predict the future environmental impact assessment, assumptions about the disposal rate in 2025 and 2030 were introduced and evaluated. As a result of this study, it was found that the raw material production stage of EPS boxes, which have similar processes in both Korea and Europe, has the greatest effect on the global warming effect of Korean EPS boxes. However, Korea, which has a relatively high recycling rate in the disposal process compared to incineration and landfill, showed better environmental performance than Europe in most impact indicators except freshwater eutrophication. In particular, Korea has increased the overall recycling rate compared to Europe by replacing various recyclable materials such as building materials and sundries with XPS (extruded polystyrene) recycled materials. In conclusion, it was found that increasing the recycling rate rather than incinerating and landfilling EPS boxes for fresh food in the domestic EPS industry has relatively less environmental load compared to Europe.

• Journal of Korean Society on Water Environment
• /
• v.29 no.2
• /
• pp.239-246
• /
• 2013

The foot and mouth disease and AI were highly contagious. The virus can be transmitted in a number of ways, including close-contact animal to animal spread, long-distance aerosol spread and fomites, or inanimate objects, typically fodder and motor vehicles. A lot of burial sites were constructed in a short time for preventing the rapid spread of the virus. The carcass burial sites have a risk potential because the sites were constructed without any appropriate and systematic management. It resulted from lacking of time, equipments and man power. The carcass burial sites more than 4,700 constructed in 2011. Approximately 7 million poultry and 3.5 million livestock including head of cattle and swine were buried in farm land. It is time to be concerned if the secondary pollutions occur from the burial sites. The environmental impacts should be analyzed for managing the burial sites effectively and minimizing damages and risks to the environment and human health. This study was to analyze environmental impacts of the process of carcass burial construction using a life cycle assessment methodology. All input data of raw materials and energy usage were collected and the inventory was constructed. The results showed that 1 ton of carcass burial of the environmental impacts were $0.51yr^{-1}$ for ADP, 0.09 kg of 1,4DCB-eq for FAETP, 31.17 kg of $CO_2-eq$ for GWP, 0.04 kg of $C_2H_4-eq$ for POCP, 0.06 kg of $SO_2-eq$ for AP.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.465-468
• /
• 2003

It has taken a growing interest about environmental problems such as global warming and water pollution. Because of intensified environmental problems, it would be going on the research about environmental preservation and harmful factor reduction. Also, it makes ISO to show the quantitative data about LCA analysis. The research of LCA method in the domestic construction industry has advanced stealing from a national point of view. In this study, it would be possible to confirm the feasibility of a plan by LCA analysis. Moreover, the result of life cycle cost which deliberate the influence cost of environment in the steps of material production, construction, maintenance, and disposal has made to be 74,819,560,776 won in a plan and 78,979.469,602won in alternative. That is, it would analysis for a plan to reduce 4,159,908,826 won for alternative.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.4
• /
• pp.82-92
• /
• 2018

Considering that earlier stage of construction project has a great influence on the possibility of lowering of environmental load, it is important to build and utilize system that can support effective decision making at the initial stage of the project. In this study, we constructed an environmental load estimation model that can be used at the early stage of the project using basic design factors. The model was constructed by using the artificial neural network to estimate environmental load by applying to planning stage (ANN-1), basic design stage (ANN-2). The result of test, shows that average of absolute measuring efficiency and standard deviation of ANN-1 and ANN-2 were 11.19% / 5.30% and 9.59% / 3.09% each. This result indicates that the model using the input variables extended with the project progress has high reliability and it is considered to be effective in decision support at the initial design stage of the project.

• The Journal of Korean society of community based occupational therapy
• /
• v.8 no.3
• /
• pp.59-67
• /
• 2018

Objective : This study was conducted to investigate the effects of occupation-based group cooking program on executive function for children in community children's center. Methods : The children who participated in the study were 7 to 9 years old. This study was based on a one-group pre-posttest design, which the group cooking program included making of sandwiches, frog-shaped hamburgers, patbingsu, sausage gimbap, and flowerpot cupcake. This study consisted of five activity sessions, which each session lasted for 120 minutes. Effectiveness of the program was measured by using the STROOP Color and Word Test, Children's Color Trails Test and Assessment of Motor and Process Skills. Results : The differences between pre and posttest scores on STROOP Color and Word Test and the process skill score of Assessment of Motor and Process Skills were statistically significant. There was no difference significantly between pre and posttest scores in Children's Color Trails Test-2. Conclusion : This study demonstrated that the group cooking program intervention has effects on cognitive inhibition executive function and performance executive function of children in the community children's center. This study suggests that occupation-based intervention can be applied to various clients in the community setting.

• Clean Technology
• /
• v.24 no.2
• /
• pp.146-153
• /
• 2018

The water footprint is an important component of the Single Market for Green Product initiative based on the EU's Roadmap to a Resource Efficient Europe. In July 2014, the EU has established the International Standard for Water Footprint (ISO 14046) and Korea has complied with the Korean Industrial Standard (KS I ISO 14046) in April 2015. If a certification system based on the international standard (ISO 14046) is introduced, developing countries such as India and Vietnam, which are not equipped with bases, can become a trade barriers in exporting, so Korea should establish a strategy to reverse them. On the other hand, water footprints are designed to take into account local environmental impacts when compared to similar footprints (eg, carbon footprint) using LCA, so that products manufactured and manufactured in Korea will have an impact on domestic waters Should be considered. Therefore, the method of the water footprint should conform to the standard for compatibility with other countries. In order to consider the domestic water condition, it is necessary to identify suitable indicator or factor for estimating water footprint on Korea. For this purpose, this study analyzed the water footprint estimation study conducted at domestic and foreign based on international standards and through the analysis of statistical data related to domestic water resources, we confirmed the applicability of the water footprint methodology in Korea.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.11
• /
• pp.611-617
• /
• 2016

Remanufacturing that is the rebuilding of a product to specifications of the original manufactured product by collecting used-product, completely disassembling, cleaning and repairing or replacing with a new part and reassembling has been received attention in aspects of resource, recycling because it is a great environmental improvement. Remanufacturing is the rebuilding of a product to specifications of the original manufactured product by collecting used-product, completely disassembling, cleaning and repairing or replacing with a new part and reassembling. With a great environmental improvement and resource recycling and conservation, many studies were conducted. Up to date, remanufacturing activities are mainly applied to automobile parts and printer toner cartridge in South Korea. However, remanufacturing of rental product is not well conducted although rental products are collected in good condition and could be remanufactured in the same condition as a new product. Therefore, in this study, we conducted life cycle assessment (LCA) to an air cleaner product that is one of rental products. This study attempts to identify the processes in new products and remanufacturing life cycles that contribute the most environmental impacts. The results show that air cleaner remanufacturing could reduce about 20% of environmental impacts compared to new product. The greatest benefit related to environmental impact is with regard to ozone layer depletion potential (ODP), which is reduced by 94%. In the life cycle of air cleaner, raw material extraction stage had the most environmental impacts, especially with regard to abiotic depletion potential (ADP) and global warming potential (GWP). In the environmental impacts in each part, the ABS power had the highest environmental impacts.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.1
• /
• pp.61-68
• /
• 2011

The "ship's routeing" system was adopted by IMO and has been operated on the major sea routes of all over the world for the prevention of marine casualty and the improvement of marine traffic flow. Thereupon, also in Korea, the "Hong-do" and "Bogil-do" sea routes on southern coast were designated to mandatory sea area by traffic separation scheme(TSS) in 2003, and the "Geomun-do" sea route on southern coast was designated in 2005. But there were few or no studies on the effect of designated traffic separation scheme in Korea. For this reason, in this paper, we evaluated the contribution of traffic separation scheme to the prevention of marine casualty and the improvement of marine traffic flow after designation of domestic traffic separation scheme using data of the marine casualties and ship's tracks from AIS information. The results of evaluation showed that on the contrary, the cases of marine casualties were increased on some sea routes and regular traffic flows were disturbed by some vessels after designation of traffic separation scheme. For the safer and better sea routes, alternative ideas such as reposition of ship's routing on "Hong-do" and "Bogil-do" sea areas were suggested.