• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.171-175
• /
• 1996

Gate insulator for Si field emitter is usually formed by e-beam evaporation. However, the evaported oxide requires densification for a stable process and a reduction of gate leakage which results from its Si-rich and nonstoicheiometric structure. In this study, we have developed the process technology able to densify the evaporated oxide in H$_{2}$O ambient. Using this process, we have fabricted thefield emitter array with 625 emitters per pixel, of which gate hole diameter is 1.4.mu.m, for the pixel, anode current of 14.3.mu.A was extracted at a gate bias of 100V and gate leakage was about 0.27% of the total emission current.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.12
• /
• pp.65-71
• /
• 1996

A novel lateral field emitter triode has been designed and fabricated. It has self-vacuum environmets and low turn-on voltage, so that the chief problems of previous field emission devices such as additional vacuum sealing process and high turn-on voltage are settled. An in-situ vaccum encapsulation empolying recessed cavities by isotropic RIE (reactive ion etch) method and an electron beam evaporated molybdenum vacuum seals are implemented to fabricate the new field emitter triode. The device exhibits low turn-on voltage of 7V, stabel current density of 2.mu.A/tip at V$_{AC}$ = 30V, and high transconductance (g$_{m}$) of 1.7$\mu$S at V$_{AC}$ = 22V. The superb device characteristics are probably due to sub-micron dimension device structure and the pencil type lateral cathode tip employing upper and lower LOCOS oxidation.

• Korean Journal of Materials Research
• /
• v.13 no.7
• /
• pp.424-428
• /
• 2003

The microstructure and field emission properties of carbon nanotubes(CNT) grown by Ni-catalytic chemical vapor deposition(CVD) were investigated. CVD-grown CNT had a high density of curved shape with randomly oriented. It was found that an increase in electric field caused an increase in field emission current and field emission sites of CNT. The maximum field emission current density was measured to be 3.6 ㎃/$\textrm{cm}^2$ at 2.5 V/$\mu\textrm{m}$, while the brightness of 56 cd/$\textrm{cm}^2$ was observed for the CNT-grown area of 0.8 $\textrm{cm}^2$ from a phosphor screen. Field emission current at constant electric field gradually decreased initially and then stabilized with time.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.251-253
• /
• 2006

본 연구에서는 Anodic Aluminum Oxide(AAO) 템플레이트 제조 시 알루미늄의 결정방위가 세공 형성에 미치는 영향을 연구하였다. 시료는 직경 20mm 두께 2mm의 세가지 단결정 시편을 사용 하였으며 이는 XRD 장비로 $2{\theta}$ 측정결과를 통해 확인 하였다. 양극 산화전 평활한 면을 얻기 위해 다이아몬드분말로 미세연마하였으며 양극산화는 세가지 시편 모두 동일한 조건에서 2단계공정까지 진행하여 반복 실험 하였다. 결과는 전계방출주사전자현미경(FE-SEM)으로 표면의 세공형태를 관찰 하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.7
• /
• pp.634-639
• /
• 2002

Using laser ablation technique carbon thin films were deposited on Si(100) substrate as a function of substrate temperature. In this study, the surface morphologic, structural and field emission properties of these carbon thin films were investigated using Raman spectroscopy, scanning electron microscopy, and a diode technique, respectively. With increasing of the substrate temperature, the surface morphologies were changed significantly. Moreover, the intensity of D-band and the full width at half maximum of these bands were dependent on substrate temperatures. As the substrate temperature was increased, the field emission properties were improved. As the result, we find that the field emission properties of the films were changed significantly with the substrate temperature and structural features of carbon than films.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.8
• /
• pp.713-719
• /
• 2002

In this study, the vertically well-aligned CNTs were synthesized by DC bias-assisted inductively coupled plasma hot-filament chemical vapor deposition (ICPHFCVD) using radio-frequence plasma of high density and that CNTs were vertically grown on Ni(300 )/Cr(200 )-deposited glass substrates at 58$0^{\circ}C$. This system(ICPHFCVD) added to tungsten filament in order to get thermal decompound and DC bias in order to vertically grow to general Inductively Coupled Plasma CVD. The grown CNTs by ICPHFCVD were developed to higher graphitization and fewer field emission properties than those by general ICPCVD. In this system, DC bias was effect of vortical alignment to growing CNTs. The measured turn-on fields of field emission property by general ICPCVD and DC bias-assisted ICPHFCVD were 5 V/${\mu}{\textrm}{m}$ and 3 V/${\mu}{\textrm}{m}$, respectively.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1448-1450
• /
• 2001

본 연구에서는 알루미늄 마스크를 이용하여 다결정 실리콘 결정립의 수평성장을 유도하는 새로운 엑시머 레이저 어닐링 방법을 제안한다. 제안된 방법은 비정질 실리콘 박막 위에 알루미늄 패턴을 형성하여 선택적으로 레이저 빔을 차단시키고, 액상 실리콘의 열을 금속박막을 통해 방출시킴으로써 다결정 실리콘 결정립의 수평성장을 유도할 수 있다. 제안된 레이저 결정화 방법을 이용하여 최대 1.6${\mu}m$의 수평성장 결정립을 형성하였고, 알루미늄 패턴의 경계로부터 결정립을 성장시킴으로써 결정립 경계의 위치를 제어하였다. 제안된 방법을 이용하여 제작한 다결정 실리콘 박막 트랜지스터는 기존의 다결정 실리콘 박막 트랜지스터에 비해 전계효과 이동도 및 온/오프 전류비 등의 전기적 특성이 우수하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.149-149
• /
• 2010

The effect of titanium (Ti) coating over the surface of carbon nanotubes (CNTs) on field emission characteristics was investigated. Since the work function of CNTs emitter is about 5.0 eV, field emission would be observed at lower voltage if this work function gets lower. Work function of Ti is approximately 4.09eV. Field emission characteristics of as-grown and Ti-coated CNTs were measured in a diode-type configuration. The resultant emission characteristics revealed that thin($50{\AA}$-thick) Ti-coated CNTs could be a better electron emitter with lower emission voltage and higher emission efficiency.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.57-57
• /
• 1999

공기 플라즈마로 다이아몬드 박막을 식각하여 한 방향으로 정렬된 고밀도의 다이아몬드 바늘을 만들었다. 다이아몬드 기판에 적당한 양의 몰리브데늄 박막을 입힌 후 수백 볼트의 음 전압을 걸고 RF 또는 직류 플라즈마로 식각하였다. 바늘의 모양과 밀도는 기판 온도, 압력, 바이어스 전압, 전력, 몰리브데늄 양 등의 식각조건에 따라 결정되었다. 기판 온도가 높으면 바늘이 굵어졌다. 몰리브데늄 박막은 식각마스크로 작용하였는데 때때로 몰리브데늄으로 만들어진 기판 장착대가 스퍼트링되어 저절로 몰리브데늄 박막이 입혀져서 바늘이 만들어지기도 하여 바늘 밀도, 형상을 정밀하게 조절하기 위해서는 적당한 양의 몰리브데뉴 박막을 미리 입히는 것이 좋다. 조건이 잘 맞으면 굵기가 0.1$\mu\textrm{m}$, 바늘 사이 간격이 0.1$\mu\textrm{m}$, 높이는 3$\mu\textrm{m}$ 이상인 다이아몬드 바늘 격자가 만들 수 있었다. 이러한 바늘은 다결정 다이아몬드 박막 뿐만 아니라 고온고압 다이아몬드, 자연 다이아몬드 등으로부터도 만들 수 있었다. 다이아몬드 바늘은 전계 전자 방출 소자, 복합 재료를 위한 다이아몬드 섬유, 방열판, 다공질 다이아몬드 등으로 사용할 수 있다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.84-87
• /
• 2003

Carbon-nitrogen (CN) nanofibers have been produced using a water cooled hot isostatic pressure (HIP) apparatus. The CN nanofibers were grown in random with the diameter of about 100-150nm and length over $10{\mu}m$. Emission properties of CN nanofibers were investigated for spacing, between anode and cathode, variation. Then turn-on fields about $1.4V/{\mu}m$. The time reliability and light emission test were carried out for above 100 hours. We suggest that CN nanofibers can be possibly applied to high brightness flat lamp because of low turn-on field and time reliability.