• Journal of the Korea Concrete Institute
• /
• v.18 no.3 s.93
• /
• pp.347-354
• /
• 2006

In this paper we have attempted to bring the wavelet transform theory to the dynamic response conversion algorithm. This algorithm is proposed for the problem of estimating the displacement data by defining the transformed responses. In this algerian, the displacement response can be obtained from the measured acceleration records by integration without requiring the knowledge of the initial velocity and displacement information. The advantage of the wavelet transform over either a pure spectral or temporal decomposition of the signal is that the pertinent signals features can be characterized in the time-frequency plane. In the response conversion procedure using the wavelet decomposition signals, not only the static component can be extracted, but also the dynamic displacement component can be separated by the structural mode from the identified displacement response. The applicability of the technique is tested by an example problem using the real bridge's superstructure under several cases of moving load. If the reliability of the identified responses is ensured, it is expected that the proposed method for estimating the impact factor can be useful in the bridge's dynamic test. This method can be useful in those practical cases when the direct measurement of the displacement is difficult as in the dynamic studies of huge structure.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.8
• /
• pp.801-808
• /
• 2004

In this paper, we proposed the grating parallel plate waveguide structure for converting a linearly polarized wave to a circularly polarized wave. For the design of the polarizer, the moment method and Floquet's theorem are applied under two assumptions that the incident wave is a plane wave and the structure is infinitely periodic. In order for the more precise design, we performed the near-field analysis for the finite polarizer structure using MATLAB. By comparing with the measured results obtained by the near-field arrangement, we verified the correctness of our near-field analysis. By taking the ideal assumptions considered in the initial design procedure into account, newly designed modified dimensions for the polarizer was suggested which give improved performance.

• 전자공학회논문지 IE
• /
• v.44 no.4
• /
• pp.19-25
• /
• 2007

In this paper, we consider the input-state(I/S) transformation for the time-varying linear system with the uncertainty because of to determine the bounded range of the uncertainty. And we get the time-invarying linear system after the I/S transformation. We present the necessary sufficient condition for the I/S transformation. The transformed system represent the system with the multiple integral. We verify the proposal algorithm via the example and examine.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4B
• /
• pp.379-387
• /
• 2002

In this paper, we present a procedure to obtain the transient scattering response from three-dimensional arbitrarily shaped and closed conducting bodies using time-domain magnetic field integral equation (TD-MFIE) with triangular patch functions. This approach results in accurate and comparably stable transient responses from conducting scatterers. Detailed mathematical steps are included, and several numerical results are presented and compared with results from a time-domain electric field integral equation (TD-EFIE) and the inverse courier transform solution of the frequency domain results.

• Journal of the Korean Magnetics Society
• /
• v.26 no.3
• /
• pp.81-85
• /
• 2016

This paper introduces a performance integration method to predict variation characteristic of a performance function of electromagnetic machines or devices due to manufacturing tolerances. A normalized performance function space and a hybrid mean value technique are adapted to effectively predict mean and variance, which can identify probabilistic distribution of the performance function. To verify the effectiveness and accuracy of the proposed method, a mathematical problem and a loudspeaker model are tested, and numerical results are compared with those of existing methods such as Monte Carlo simulation and univariate dimension reduction method.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.5
• /
• pp.899-909
• /
• 1992

An iterative solution technique is presented to analyze the dynamic systems of rigid bodies subjected to kinematic constraints. Lagrange multipliers associated with the constraints are iteratively computed by monotonically reducing an appropriately defined constraint error vector, and the resulting equation of motion is solved by a well-established ODE technique. Constraints on the velocity and acceleration as well as the position are made to be satisfied at joints at each time step. Time integration is efficiently performed because decomposition or orthonormalization of the large matrix is not required at all. An acceleration technique is suggested for the faster convergence of the iterative scheme.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.5
• /
• pp.787-797
• /
• 1986

An implicit approach is employed to obtain a general boundary integral formulation of axisymmetric elastic problems in terms of a pair of singular integral equations. The corresponding kernel functions from the solutions of Navier's equation are derived by applying a three dimensional integral and a direct axisymmetrical approach. A numerical discretization schem including the evaluation of Cauchy principal values of the singular integral is described. Finally the typical axisymmetric elastic models are analyzed, i.e. the hollow sphere, the constant thickness and the V-notched round bar.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.8 no.5
• /
• pp.1-9
• /
• 1971

An analog to digital converter Ivhich is applicable to mass production of digital multimeter is developed. The solid state digital instrument has accuracy $\pm$0.1% of feading $\pm$1 digit over 1 mV to 1000 volts with high input impedance and automatic function. All possibility to affect the distortion of A/D converter is tudied. As a result, useful linearity with high temperature stability of integrating waveforms is achieved by the very simplified circuit configuration to assure the proposed accuracy under various ambient condition.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.5
• /
• pp.122-131
• /
• 1999

저주파의 아날로그 신호를 디지털 신호로 변환하기 위해 sigma-delta 아날로그-디지털 변환기의 이용이 용이하다. 이 변환기는 변조기와 디지털 필터로 구성되는데 본 논문에서는 변조기에 대해서만 언급한다. 모델링을 통해 14비트 분해능을 갖는 2차 sigma-delta 변조기를 설계하기 위한 변조기의 구성요소 즉 연산 증폭기, 적분기, 내부 ADC 및 DAC의 최대 허용 에러 범위를 규정하였으며, 이를 토대로 연산증폭기, 2비트 ADC 및 DAC 등을 설계·검증하고, 이들을 서로 연결하여 2차 sigma-delta 변조기를 구성하였다. 3비트 ADC의 기준전압을 조절하여 변조기 성능 향상을 도모하였으며, 내부 DAC를 축전기 및 간단한 제어회로로 구성하여 비선형성 에러를 최소화하였다. 설계된 각각의 구성요소들은 모델링에서 정의된 에러 범위를 모두 만족하였으며, 전체 변조기는87㏈의 입력범위와 87㏈의 최대 신호 대 잡음 비를 가졌다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1310-1318
• /
• 1998

Sigma-delta converter is frequently used for conyerting low-frequency anglog to digital signal. The converter consists of a modulator and a digital filer, but our work is concentrated on the modulator. In this works, to design second-order sigma-dalta modulator with 14bit resolution, we define maximumerror limits of each components (operational smplifier, integrator, internal ADC, and DAC) of modulator. It is first performed modeling of an ideal second-order sigma-delta modulator. This is then modified by adding the non-ideal factors such as limit of op-amp output swing, the finit DC gain of op-amp slew rate, the integrator gian error by the capacitor mismatch, the ADC error by the cmparator offset and the mismatch of resistor string, and the non-linear of DAC. From this modeling, as it is determined the specification of each devices requeired in design and the fabrication error limits, we can see the final performance of modulator.