• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.82-82
• /
• 2018

광전소자용 투명전극으로 적용하기 위한 초박형 Al 박막에 대해서 기초연구를 수행하였다. 증착 전 챔버(chamber) 내 기저압력은 $3{\times}10^{-7}Torr$이하로 유지하였으며 Ar 불활성 기체의 유입을 통해 작업압력을 $1{\times}10^{-2}Torr$로 상승시켜 증착을 실시하였다. DC 마그네트론 스퍼터링법을 이용하여 유리기판상에 Al 박막의 증착을 실시하였으며, 박막의 두께가 3-12 nm인 Al 박막을 각각 형성하였다. 두께가 7 nm 일 때 면저항은 $135{\Omega}/{\square}$로 측정되었고 7 nm 이상인 두께의 박막은 두께가 증가할 때 면저항이 점진적으로 감소되는 경향을 확인할 수 있었다. 두께가 10 nm인 박막의 측정된 면저항은 $13.1{\Omega}/{\square}$로 두께 7 nm인 박막과 비교하였을 때 약 10배의 차이를 확인할 수 있었다. 두께 6 nm 이하인 박막은 면저항 측정이 불가능하였는데 이는 SEM 분석 결과, 연속박막을 이루지 못 하였기 때문이라고 결론을 내릴 수 있었으며, 두께 12 nm인 박막까지 완전한 연속박막이 형성되지 않았다. 각각의 박막에서 입자의 크기는 선 교차법(line intercept method)을 이용하여 시편당 평균 120개의 입자에 대한 평균값을 측정하였으며, 이론적으로 예상할 수 있는 바와 같이 두께가 증가할수록 입자크기도 비례하여 증가하게 되는 것을 확인할 수 있었다. 가시광선 파장영역 내 투과도의 경우, 3 nm 두께에서 평균 80% 이상의 투과도가 측정된 데 반하여, 4-5 nm 두께에서 평균 60%로 급격하게 감소되기 시작하며 그 이후, 두께 증가에 따라 투과도가 점진적으로 감소되는 경향을 확인할 수 있었다. 또한 Al 박막은 시간의 경과에 따른 표면의 산화가 진행되어 기존에 측정된 면저항보다 10-60%의 면저항이 증가하였는데 이는 두께가 얇을수록 더 산화의 영향을 많이 받기 때문에 나타난 결과로 보인다. 추후 산화방지막 및 빛반사방지막 층을 초박형 Al박막과 함께 Oxide/Metal/Oxide 구조로 형성하여 위와 같은 현상들을 해결하고 박막물성의 증진을 통해 투명전극에 적용을 목표로 한다.

• Journal of the Korean Magnetics Society
• /
• v.9 no.2
• /
• pp.104-110
• /
• 1999

The effect of the composition and the heat treatment on the magnetic and magnetoresistance properties in AgCo alloy films and Fe/AgCo/Fe trilayers prepared by the co-evaporation method were studied. As the alloy film thickness decreases, especially below 50 nm thick, the magnetoresistance decreases and the saturation field increases significantly. The change of the Co content, heat treatment, and deposition of the Fe under/over-layer were effective to prevent the reduction of the and the increasing of the saturation field. For 40 at.%Co sandwiches, the minimum saturation field was obtained in the 20 nm alloy film with 30nm Fe under-over layer annealed at 300 $^{\circ}C$ for 10 min. Its saturation field and the MR ratio were 1.01 kOe 5.16% respectively.

• Polymer(Korea)
• /
• v.26 no.6
• /
• pp.812-820
• /
• 2002

The positive temperature coefficient (PTC) characteristics of polymer composites were investigated with the nano-sized carbon black particles using solution tasting and melt compounding methods. The polymeric PTC composites should the electrical threshold at 35 wt% for the melt compounding method and 40 wt% for the solution casting method. The ethylene vinylacetate copolymer (EVA) composite showed a gradual increase of resistance as a function of temperature and showed a maximum at the polymer molting point. The resistance of the high-density polythylene (HDPE) composite remains unchanged with temperature but started to Increase sharply near the melting point of HDPE and showed a maximum resistance at the melting point of HDPE. The dispersion of nano-sized carbon black particles was investigated by scanning electron microscopy (SEM) and low resistance after electrical threshold, and both methods exhibited a well dispersed morphology. When the electric current was applied to the PTC composites, the resistance started increasing at the curie temperature and further increased until the trip temperature was roached. Then the resistance remained stable over the trip temperature. The secondary increase started at T$\sub$m/ of matrix polymer and kept increasing up to the trip temperature.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1309-1315
• /
• 1997

Yields of enzyme-resistant starch (RS) from three kinds of maize starches (Amioca, normal starch and Amylomaize VII) which were treated with 1 N HCl for 24 hr and physicochemical characteristics were investigated. Hydrolysis rate of maize starches decreased with increasing amylose content. Maximum wavelength $({\lambda}_{max})$ and iodine affinity were decreased by the acid treatment. The yields of RS increased with acid treatment up to 12 hr and then decreased. The yield of for 12 hr acid-treated Amioca increased 8 times more than untreated sample, but those of normal starch and Amylomaize VII slightly increased. Using SEM, acid-treated and autoclaved maize starches showed gel like structure, but RS had round and rod shape small particles. X-ray diffraction patterns of autoclaved starches showed amorphous structure in Amioca and B-type in normal starch and Amylomaize VII, and those of RS showed all completely crystalline structure.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.3
• /
• pp.71-76
• /
• 2023

In this paper, TE(transverse electric) scattering problems by a resistive strip grating between a grounded double dielectric layer are analyzed by applying the FGMM(fourier galerkin moment method) known as a numerical method of electromagnetic fileld. The boundary conditions are applied to obtain the unknown field coefficients, the scattered electromagnetic fields are expanded in a series of Floquet mode functions, and the resistive boundary condition is applied to analysis of the resistive strip. Overall, as the resistivity decreased, the magnitude of the current density induced in the resistive strip increased, and the reflected power also increased. In case of uniform resistivity, the reflected power decreased as the relative permittivity of the dielectric layers increased or the thickness of the dielectric layer increased. The numerical results for the presented structure in this paper are shown in good agreement compared to those of the existing papers.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.65-70
• /
• 2005

A low resistivity zone is found in many places such as a fractured fault zone, weathered zone and aquifer. The electrical resistivity is influenced mainly by pore fluid as well as the clay mineral types and contents, Hence, it is very important to understand the relationship between the electrical resistivity and clay contents associated with the low resistivity zone for geotechnical applications such as civil engineering. This study examines the characteristics of clay mineral types and contents to electrical resistivity through sample measurements, and proposes an expression relating the resistivity and clay content. The electrical resistivity is measured for an artificial agar specimen with clay minerals instead of a natural rock. The clay minerals used are Kaolinite and Montmorillonite. Montmorillonite shows remarkably lower resistivity than Kaolinite, although its clay content is fewer than that of Kaolinite. Also, the proposed expression shows a good correlation coefficient as high as 0.89 or more in all clay minerals.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.47-50
• /
• 2008

Streamer resistivity surveys in shallow marine environments were carried out to analyze sediment characteristics at the bottom of reservoir. Because the resistivity values of reservoir water are very low and those of sediment are relatively high, apparent resistivity values increase with depth. And it is necessary to eliminate the apparent resistivity data decreased highly when the number of separation increases. According to the repeated data processing, we proposed the resistivity ratio of upper-to-lower layer is $0.6{\sim}0.8$ because the RMS error of inversion leads to the minimum in these range. As a result of the inversion for two- and three-layer model, the inversion including water depth is proved to be more effective than conventional method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.21-26
• /
• 2019

In this paper, TE(transverse electric) scattering problems by a resistive strip grating between a double dielectric layer are analyzed by using the PMM(point matching method) known as a numerical method of electromagnetic fileld. The boundary conditions are applied to obtain the unknown field coefficients, the scattered electromagnetic fields are expanded in a series of Floquet mode functions, and the resistive boundary condition is applied to analysis of the resistive strip. The numerical results for the normalized reflected and transmitted power are analyzed by according as the width and spacing of resistive strip, the relative permittivity and thickness of the double dielectric layers, incident angles, and uniform resisitivity. Typically, the reflected power for the conductive strip increased as the value of the relative dielectric constant increased, the reflected power for the resistive strip with uniform resistivity decreased as the value of the resisvivity increased. The numerical results for the presented structure of this paper are shown in good agreement compared to those of the existing papers.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.3
• /
• pp.43-51
• /
• 2011

This paper describes the results of pullout tests in the laboratory, which are conducted to assess the pullout performance of recently developed geosynthetic strip reinforcement with rounded band anchor. The geosynthetic strip can be used as reinforcements in reinforced soil wall with concrete block facing. The pullout resistance of the geosynthetic strip with rounded band anchor is mobilized by the combination of the interface friction between soil-reinforcement surface and the passive soil resistance caused by the rounded band anchor. Therefore, both the friction resistance and the passive resistance have to be considered in design. From the pullout test results, when the rounded band anchor are formed in the end part of the geosynthetic strip, pullout strength increases about from 10% to 65%. The passive resistance can be evaluated based on the pullout test results.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.4
• /
• pp.274-280
• /
• 2000

To analyze the resistance of the bottom trawl which is composed with 6 seams net, the field experiment was carried out on the sea near Kokunsan Is., western sea of Korea. The resistance was respectively measured in the otter board and the net according to the change of warp length and towing speed. The results obtained are summarized as follows : 1. Total resistance of the test trawl gear are slightly increased according to the length of warp. 2. The resistance of net is increasing a little according to the length of warp, but it is expressed. $$ R_n/=10 \frac{d}{\ell}$representatively. 3. The resistance of otter board can be expressed $Rb=1810_{\upsilon}^0.8.$ 4. Comparing with the value of measuring resistance and Koyama formula resistance by the length of warp respectively, the resistance of test trawl gear is high in the slow towing speed, and the resistance of Koyama formula is high in the fast towing speed, and that the cross-point of the both line between the resistance of the test net and Koyama formula is moved to high according to the increment of warp length.