• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.10 s.340
• /
• pp.1-8
• /
• 2005

In this paper, a FRAM design style based on PMOS-gating cell structure is described. The memory cell consists of a PMOS access transistor and a ferroelectric capacitor. Its plate is grounded. The proposed scheme employs three novel operating methods: 1) $V_{DD}$ precharged bitline, 2) negative-voltage wordline technique and 3) negative-pulse restore, Because this configuration doesn`t need the on-pitch plate control circuitry, it is effective in realizing cost-effective chip sizes. Implementation for a 2.5-V, 1-Mb FRAM prototype design in a $0.25-{\mu}m$, triple-well technology shows a chip size of $3.22\;mm^{2}$, an access time of 48 ns and an active current of 11 mA. The cell efficiency is 62.52 $\%$. It has gained approximately $20\;\%$ improvement in the cell array efficiency over the conventional plate-driven FRAM scheme.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.111-120
• /
• 2005

A cost effective three-dimensional color gamut mapping architecture is described. The conventional three-dimensional reduced resolution look-up table is considered and the concept of three-dimensional reduced resolution difference look-up table is introduced for cost effective and real-time color gamut mapping. The overall architecture uses one-dimensional memory decomposition of three-dimensional gamut mapping look-up table, three-dimensional interpolation and simple addition operation for generating the final gamut mapped colors. The required computational cost is greatly reduced by look-up table resolution adjustment and further reduced by the gamut mapping rule modification. The proposed architecture greatly reduces the required memory size and hardware complexity compared to the conventional method and it is suitable for real-time applications. The proposed hardware is suitable for FPGA and ASIC implementation and could be applied to the real-time display quality enhancement purposes.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.4
• /
• pp.18-26
• /
• 2001

In this paper, we propose an ATC(Automatic Transfer mode Controller) algorithm and an average-mode-change method for use in Gear shift PLL which can automatically change loop gain. The proposed ATC algorithm accurately detects proper timing or the mode change and has a very simpler structure - than the conventional lock detector algorithm often used in QPSK. And the proposed average mode change method can obtain low errors of estimated frequency offset by averaging the loop filter output of frequency component in shift register. These algorithms are also useful in designing ASIC, since these algorithms occupy small circuit area and are adaptable for high speed digital processing. We also present phase tracking performance of proposed Gear-shift PLL, which is composed of polarity decision PD, ATC and average mode change circuit, and analyze the results by examining constellation at each mode.

• Journal of the Korean Society for Railway
• /
• v.16 no.4
• /
• pp.241-245
• /
• 2013

In the case of the existing train control system, the driver monitors the condition of the vehicle through a composite controller device that displays various information on a screen in the vehicle. However, when problems arise such as car trouble, it is difficult for the drivers to take action immediately. In addition, maintenance personnel have to manually save data one by one after storing the vehicle to analyze control information of the main devices such as the brake controller and auxiliary power. To improve these points, a system that sends and receives all information in real time should be established by installing a sensor communication network and a surveillance system. This study attempts to improve the safety and maintenance of rail vehicles by suggesting a standardized method for train control and surveillance system.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.12
• /
• pp.209-216
• /
• 2010

Optical Temperature Distribution Sensor Measurement System uses fiber optic sensors itself for temperature measurement is a system which can be measured the Installed surrounding entire temperature as a thousand points by laying a single strand of fiber optic. If there are a lot of measuring points in the distribution Measurement, the cost of each measuring point can be reduced the cost level of existing sensors and at the same time this has the advantage of connecting all sensors as one or two strands of fiber. Generally Optical Fiber is used for communication but Optical Fiber itself can be used for sensor and it has the characteristic of sensor function which can be measured Temperature in the at least each one meter distance. By using these characteristics each sensor and the number of Connection Lines can be reduced. In this paper, we implement a real time temperature monitoring system, which is easy to manage and control for data storage, data management, data storage using a computer and which has the functions of monitoring and correction according to Real-time temperature changes using historical temperature data.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1916-1920
• /
• 2010

영상수위계는 카메라에 의해서 수위표를 촬영하여 촬영된 영상을 처리하여 수위값으로 변환하여 자동적으로 수위를 측정하는 장비이다. 이 수위계는 기존 수위측정 장비인 부자식, 압력식, 기포식, 초음파식, 레이다식과는 달리 수위표를 촬영한 영상으로부터 수위를 직접 눈으로 확인할 수 있는 장점이 있다. 이로 인해 영상자료로부터 측정된 수위를 검증할 수 있어 수위측정의 정확도를 향상시킬 수 있다. 그리고 수위표 영상과 더불어 관측지점 주변의 전체 영상을 동시에 촬영하여 실시간으로 전송하기 때문에 홍수시 하천 상황에 대한 모니터링 목적으로 사용될 수 있다. 영상수위계 시스템은 크게 메인제어기, 전원부, 서버부 및 카메라부로 구성되어 있다. 현재 운영되고 있는 시스템은 전원장치 리셋시 전 시스템을 리셋해야하고, 상전 단전시 전 시스템이 off된다. 그리고 별도의 통신모듈을 사용하여 장비간 통신이 이루어지고 있다. 또한 카메라부에는 렌즈와 팬/틸트를 제어하기 위한 별도의 장비가 포함되어 있고, 백색 LED 조명이 사용되어 야간에 수위인식주기마다 조명이 on/off 되고 있다. 위와 같은 전원장치의 운영으로 시스템을 안정적으로 운영할 수 없다. 그리고 수위 오인식을 최소화하기 위해서는 연속적인 수위 인식이 필요하지만, 백색 LED조명과 1초에 2프레임을 캡쳐하는 비디오 캡쳐방식에 의해 시스템을 상시로 운영하는 것이 곤란하다. 현재 운영 중인 영상수위계를 안정적으로 운영할 수 있도록 장비별로 제어가 가능하도록 전원 제어장치를 개발하였고, 상전 단전시 최소 30분 정도 전원을 유지할 수 있도록 무정전전원장치(UPS)를 설치하였으며, 측정자료의 저장장치를 하드디스크 타입에서 Flash SSD 메모리 타입으로 교체하였다. 또한 영상수위계 시스템을 상시 운영할 수 있도록 백색 LED조명을 적외선 LED조명으로 교체하였고, 1초에 1회 수위를 인식하도록 수위인식주기와 1초에 25프레임 캡쳐할 수 있도록 비디오 캡쳐방식을 개선하였다. 위와 같은 시스템의 개선으로 시스템을 안정적으로 운영할 수 있게 되어 시스템 고장에 의해 발생하는 수위 결측을 감소시킬 수 있고, 시스템의 상시 운영으로 수 위 오인식을 최소화시킬 수 있을 것으로 판단된다.

• Korean Journal of Food Science and Technology
• /
• v.24 no.2
• /
• pp.107-110
• /
• 1992

In order to study the prediction of shelf-life and the relation between the initial reducing sugar content (So) and the fermentation period (T) to produce 0.75% acid in kimchi, kimchis were prepared with Chinese cabbage from which fermentable sugars were removed by 0%, 30%, 50%, 74. In kimchis with 2.3%, 0.97%, 0.60%: initial reducing sugar content, fermentation periods to produce 0.75% acid took 2, 7, 12 days, respectively. This relation can be expressed as the following equation; T= -16.82 LogSo+7.66. Kimchi with cabbage removed by about 80% fermentable sugar showed out about 0.8% total acidity during 30 days's storage at $25^{\circ}C$.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.3
• /
• pp.249-255
• /
• 2007

The building of spatial database such as digital maps has been extensively achieved as a base of geographic information system. However, in the GIS system built by the organizations including local autonomous entities, there are some problems technically and systematically for a promptly updating of GIS DB. This research is to develop the object-oriented database updating system to efficiently update the spatial data at any time for a small area. It could be managed the history of spatial database such as creation, modification and deletion at a object level using the UFID of spatial data. This system could help to modify or update the changed geographical features in an office or in-situ promptly. Finally, it could be made the efficient updating manner of geographic data and the assurance of newest database.

• Korean Journal of Food Science and Technology
• /
• v.47 no.2
• /
• pp.224-232
• /
• 2015

The effects of cold plasma (CP) treatments on the physicochemical and biodegradable properties of a corn biomass-containing polyester (CBPE) film were studied. The CBPE film was treated with CP generated by $N_2$, $O_2$, He, Ar, or dry air at 400-900 W and 667 Pa for 10-40 min. The glass transition temperature of the CBPE film ($-30.2--28.6^{\circ}C$) was not affected by the CP treatment, while the elastic modulus and water vapor permeability decreased (p<0.05). The ink printability was improved by the treatment and the improved printability was maintained during storage for 56 days at room temperature. Roughness of the film increased after treatments and the level of roughness appeared to increase during storage. Heat and microbial biodegradability of the CBPE film was improved by the air-CP treatment (p<0.05). These results have demonstrated the potential of applying CP treatments to improve the flexibility, printability, and biodegradability of CBPE films.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.4
• /
• pp.494-499
• /
• 2007

In this paper we realized a system, if a user selects the area of the important parts or the arrangement parts when he reads the books or the papers, which amends, stores and readjusts the characters that are included in the selected area by outputting the characters to the word processor in sequence. If a user selects what he wishes lot with his finger, the system detects the movement of the finger by applying the hand recognition algorithm and recognizes the selected area. The system converts the distance of the width and the length of the selected area to the number of the pulse, and controls the motor to move the camera at the position. After the system scales up/down the zoom to be able to recognize the character and controls the focus to the regulated zoom closely, it controls the focus in detail to get more distinct image by using the difference of the light and darkness. We realize the recognition and editing support system of korean language that converts the obtained images to the document by applying the character recognition algorithm and arrange the important parts.